Adsorption of atomic hydrogen at a nanostructured electrode of polyacrylate-capped Pt nanoparticles in polyelectrolyte

Atomic hydrogen electrosorption is reported at crystallite sites of polyacrylate-capped Pt nanoparticles (d = 2.5 +/- 0.6 nm), by assembling nanostructured electrodes of polyacrylate-Pt nanocrystallites layer-by-layer in a cationic polyelectrolyte, poly(diallyldimethylammonium chloride). Cyclic voltammetry in 1 M H2SO4 revealed a strongly adsorbed hydrogen state and a weakly adsorbed hydrogen state assigned to adsorption at (100) and (110) sites of the modified nanocrystallites, respectively. Resolving hydrogen adsorption states signifies that surface capping by the carboxylate groups is not irreversibly blocking hydrogen adsorption sites at the modified Pt nanoparticle surface. Adsorption peak currents increased with increasing the number of layers up to 16 bilayers, indicating the feasibility of nanoparticle charging via interparticle charge hopping and the accessibility of adsorption states within the thickness of the nanoparticle/polyelectrolyte multilayers. Despite similarity in hydrogen adsorption in the cyclic voltammorgrams in 1 M H2SO4, negative shifts in adsorption potentials were measured at the nanocrystallite Pt-polyelectrolyte multilayers relative to a polycrystalline bulk Pt surface. This potential shift is attributed to a kinetic limitation in the reductive hydrogen adsorption as a result of the Pt nanoparticle surface modification and the polyelectrolyte environment.     

Evaluations of solid electrodes for use in voltammetric monitoring of heavy metals in samples from metallurgical nickel industry

Evaluation of different solid electrode systems for detection of zinc, lead, cobalt, and nickel in process water from metallurgical nickel industry with use of differential pulse stripping voltammetry has been performed. Zinc was detected by differential pulse anodic stripping voltammetry (DPASV) on a dental amalgam electrode as intermetallic Ni–Zn compound after dilution in ammonium buffer solution. The intermetallic compound was observed at –375 mV, and a linear response was found in the range 0.2–1.2 mg L^–1 (r²=0.98) for 60 s deposition time. Simultaneous detection of nickel and cobalt in the low g L^–1 range was successfully performed by use of adsorptive cathodic stripping voltammetry (AdCSV) of dimethylglyoxime complexes on a silver–bismuth alloy electrode, and a good correlation was found with corresponding AAS results (r²=0.999 for nickel and 0.965 for cobalt). Analyses of lead in the g L^–1 range in nickel-plating solution were performed with good sensitivity and stability by DPASV, using a working electrode of silver together with a glassy carbon counter electrode in samples diluted 1:3 with distilled water and acidified with H₂SO₄ to pH 2. A new commercial automatic at-line system was tested, and the results were found to be in agreement with an older mercury drop system. The stability of the solid electrode systems was found to be from one to several days without any maintenance needed.     

A fully automated mass spectrometer for the analysis of organic solids

Automation of a mass spectrometer—computer system makes it possible to process up to 30 samples without attention after sample loading. An automatic sample changer introduces the samples successively into the ion source by means of a direct inlet probe. A process control unit determines the operation sequence. Computer programs are available for the hardware support, system supervision and evaluation of the spectrometer signals. The most essential precondition for automation — automatic evaporation of the sample material by electronic control of the total ion current — is confirmed to be satisfactory. The system operates routinely overnight in an industrial laboratory, so that day work can be devoted to difficult analytical problems. The cost of routine analyses is halved.     

(Eta5-pentamethylcyclopentadienyl)rhodium and -iridium complexes with weakly and strongly coordinating anions: isolation and first X-ray molecular structures of the tris(solvent) complexes [(C5Me5)M(acetone)2(H2O)][BF4]2 (M = Rh, Ir)

Several novel pentamethylcyclopentadienyl complexes of general formula [(C5Me5)IrL3][BF4]2 were prepared including the tris(solvent) precursors [(C5Me5)M(acetone)2(H2O)][BF4]2 (M = Rh, Ir) (1a,b). The X-ray molecular structures of 1a,b were determined at low temperature. Complexes 1a,b are isostructural, and both compounds crystallize in the monoclinic space group P2(1)/c with a = 10.157(3) A, b = 14.038(9) A, c = 16.335(2) A, beta = 99.73(2) degrees, and Z = 4 for 1a and with a = 10.107(9) A, b = 13.994(16) A, c = 15.996(34) A, beta = 99.61(12) degrees, and Z = 4 for 1b. The coordinated water molecule is hydrogen bonded to both BF4(-) anions. Reaction of 1a,b with pyridine (py) afforded the related tris(pyridine) complexes [(C5Me5)M(eta1-(N)-py)3][BF4]2 (M = Rh, Ir) (2a,b). Complex 2b was characterized by X-ray crystallography, monoclinic space group P2(1)/c with a = 8.665(3) A, b = 19.687(7) A, c = 18.408(5) A, beta = 94.17(3) degrees, and Z = 4. Moreover, we prepared the novel neutral compounds (C5Me5)M(eta2-NO3)(eta1-NO3) (M = Rh, Ir) (4a,b) where the anions are bonded to the metal center instead of a coordinating solvent as confirmed by X-ray study on the iridium complex 4b. The latter crystallizes in the orthorhombic space group Pcab with a = 13.032(4) A, b = 14.370(11) A, c = 14.839(18) A, and Z = 8.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

Biosynthesis of 4-methylproline in cyanobacteria: cloning of nosE and nosF genes and biochemical characterization of the encoded dehydrogenase and reductase activities

The biosynthesis of the unusual amino acid 4-methylproline in the Nostoc genus of cyanobacteria was investigated on the genetic and enzymatic level. Two genes involved in the biosynthesis were cloned and the corresponding enzymes, a zinc-dependent long-chain dehydrogenase and a Delta(1)-pyrroline-5-carboxylic acid (P5C) reductase homologue, were overexpressed in Escherichia coli and biochemically characterized. Putative substrates were synthesized to test enzyme substrate specificities, and deuterium labeling studies were carried out to reveal the stereospecificities of the enzymatic reactions with respect to the substrates as well as to the coenzymes.     

Synthesis, X-ray diffraction analysis and NMR studies of (Z)-2-methyl-3-triphenylstannyl-3-pentene-2-ol

The synthesis of (Z)-2-methyl-3-triphenylstannyl-3-pentene-2-ol and its characterization by an X-ray diffraction study and multinuclear NMR are reported. The tin atom exhibits a distorted tetrahedral SnC₄ geometry with the four Sn---C bond distances experimentally equivalent. The slight distortion from the ideal tetrahedral geometry is because of the presence of a weak intramolecular HO → Sn interaction of 3.012(3) Å which produces a loose four-membered ring. The title compound was characterized in solution by ¹H, ¹³C and ¹¹⁹Sn NMR, and the persistence of the weak intramolecular HO → Sn coordination in solution was revealed by ¹³C and ¹¹⁹Sn secondary isotope multiplet of partially labelled entities (SIMPLE-NMR) experiments.     

Cyclic 1,2-dinitrogen compounds through N,N′-di(methoxycarbonyl)hydrazinium intermediates

Acid catalyzed cyclization of methoxymethyl substituted acyclic hydrazides 4 provides cyclic hydrazides 5 in moderate to good yields through the intermediacy of N,N′-di(methoxycarbonyl)hydrazinium intermediates.     

Development of cross-linked polystyrene-supported chiral amines featuring a fluorinated linker for gel-phase 19F NMR spectrometry monitoring of reactions

Ten cross-linked polystyrene-supported, protected chiral amines featuring both a spacer, comprising from 5 to 15 atoms, and a fluorinated linker have been successfully prepared. The development of the monitoring technique by gel-phase 19F NMR spectrometry on cross-linked polystyrene derivatives proved to be of high value in four steps of the process, as shown by the comparison of data gathered from both a classic NMR spectrometer and elemental analysis. Gel-phase 19F NMR spectrometry, thus, constitutes a useful technique that complements IR and 13C NMR spectrometries for the qualitative monitoring of reactions. In addition, quantitative determination of the conversion in a given transformation is possible, provided that 19F chemical shifts of the substrate and the product be different enough (Deltadelta>base width), as illustrated by the Mitsunobu coupling process (16-->17). The technique is nondestructive, and the samples used to monitor the reactions may be returned to the reaction medium. Deprotection of the above amines was achieved and furnished eight of the final resins in good to acceptable purity for future applications.