Fundamental studies of mixed-gas inductively coupled plasmas

The effects of adding foreign gases to the central-gas flow or the intermediate-gas flow of an argon inductively coupled plasma are presented. In particular, the influence of up to 16.7% added helium, nitrogen or hydrogen on radially-resolved electron number density, electron temperature, gas-kinetic temperature and calcium ion emission profiles is examined. It is shown that these gases affect not only the fundamental parameters and bulk properties of the plasma, but also how energy is coupled and transported through the discharge and how that energy interacts with the sample. For example, added helium causes an increase in the gas-kinetic temperature, most likely due to the higher thermal conductivity of helium compared to argon but, in general, does not appear to affect significantly either the electron temperature or electron concentration. The shift in the calcium ion emission profile towards lower regions in the discharge with added helium may be attributable to higher droplet desolvation and particle vaporization rates. In contrast, the addition of nitrogen or hydrogen to an Inductively Coupled Argon Plasma (Ar ICP) results in dramatic changes in all three fundamental plasma parameters: electron number density, electron temperature, and gas-kinetic temperature. The net effect of these molecular gases (N₂ or H₂) on calcium ion emission and on the fundamental plasma parameters is shown to be dependent on the amount of gas added to the plasma and whether the gas is introduced as part of the central- or intermediate-gas flow. In general, nitrogen added to the central-gas flow causes a significant reduction in the number of electrons throughout most of the discharge (over an order of magnitude in certain regions), mainly in the central and upper zones of the ICP. A drop of 3000–5000 K in the central channel electron temperature and a smaller drop in the gas-kinetic temperature are also observed when N₂ is added to the central-gas flow. In contrast, the introduction of nitrogen in the intermediate flow causes about a 1 × 10¹⁵ electrons cm⁻³ increase in the electron concentration in the low, toroidal regions of the plasma and an increase in the gas-kinetic temperature of around 1000 K throughout most of the discharge. As seen with the addition of nitrogen to the central-gas flow, the electron temperature is found to increase in the toroidal zones of the plasma when N₂ is added to the intermediate flow. These combined effects cause a 20-fold depression in the calcium ion emission intensity only a 1.7-fold depression when N₂ is added to the central- or intermediate-gas flows, respectively. On the other hand, hydrogen causes a depression in the electron concentration in the upper areas of the plasma when this gas is added to the central flow but increases the number of electrons in the same region when added to the intermediate flow. Hydrogen also causes a dramatic effect on the electron and gas-kinetic temperatures, significantly increasing both of these parameters throughout the discharge. An increase in the calcium ion emission intensity, accompanied by a downward shift, elongation and broadening of the calcium ion emission profile is also observed with H₂ addition.     

Correlation between the fluorescent response of microfluidity probes and the water content and viscosity of ionic liquid and water mixtures

Accurate data on transport properties such as viscosity are essential in plant and process design involving ionic liquids. In this study, we determined the absolute viscosity of the ionic liquid + water system at water mole fractions from 0 to 0.25 for three 1-alkyl-3-methylimidazolium ionic liquids: 1-butyl-3-methylimidazolium hexafluorophosphate, 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide and 1-ethyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide. In each case, the excimer to monomer ratio for 1,m-bis(1-pyrenyl)alkanes (m= 3 or 10) was found to increase linearly with the mole fraction of water. Of the probes studied only PRODAN and rhodamine 6G, both of which have the ability to participate in hydrogen bonding, exhibited Perrin hydrodynamic behavior in the lower viscosity bis(trifluoromethane sulfonyl)imides. As a result, these probes allow for the extrapolation of the absolute viscosity of the ionic liquid mixture from the experimental fluorescence steady-state polarization values.     

Elucidation of the structure of quindolinone,a minor alkaloid of cryptolepis sanguinolenta: Submilligram 1H-13c and 1H-15N heteronuclear shift correlation experiments using micro inverse-detection

Elucidation of minor natural product structures has been significantly augmented by inverse-detection; further improvement has been afforded by the development of micro inverse-detection probes. We report here the elucidation of the structure of a new alkaloid, quindolinone (5H, 10H-indolo[3,2-b]quinolin-11-one), from the West African plant Cryptolepis sanguinolenta. All nmr data for this minor, preparative hplc-isolated alkaloid, including ¹H-¹⁵N one? bond heteronuclear shift correlation (HMQC) data, were recorded on an 800 μg sample of the alkaloid dissolved in 140 μl of 100% d₆-DMSO using a 400 MHz spectrometer.     

灭多威的光催化降解动力学研究

研究了农药灭多威在ＴｉＯ２光催化下的降解产物，反应动力学及影响降解速度的因素，灭多威在ＴｉＯ２催化下１０ｍｉｎ内可被完全转换为无机物而失去毒害作用，ＩＲ研究表明，灭多威的分解产物ＮＨ＾＋４，ＳＯ＾２－４和ＣＯ２，其分争过程中准一级反应，除铜和氯离子体低浓度时有促进作用，而高浓度为阻碍作用外，大部分阴，阳离子对降解均有不利影响。     

Synthesis and structural characterization of acetatobis(triphenylphosphine)dicarbonylmanganese(I), (CH3CO2)Mn(CO)2[P(C6H5)3]2: An organometallic complex containing a chelating acetate ligand

The accidental but intriguing synthesis of acetatobis(triphenylphosphine)dicarbonylmanganese(I), (CH₃CO₂)Mn(CO)₂[P(C₆H₅)₃]₂, has been accomplished by the reaction of NaMn(CO)₅ with (CH₃)₃SiCl followed by the addition of triphenylphosphine and acetic acid. A three-dimensional single-crystal X-ray diffraction analysis has shown an octahedral-like molecule containing a symmetrically oxygen-chelating acetate group, the first such group to be reported in a metal carbonyl complex. The two triphenylphosphine ligands occupy mutually trans positions with the two carbonyl ligands possessing the remaining cis sites in the octahedral complex. The compound crystallizes with four molecules in a monoclinic unit cell of space group symmetry $\text{P}\text{2}{}_1\text{c}$ and of dimensions a = 17.744(2) Å, b = 9.692(1) Å, c = 20.004(2) Å, and β = 106.195(4)°. The relatively long MnO(acetate) bond lengths [2.066(6) and 2.069(7) Å] and the relatively short MnCO bond lengths [1.701(12) and 1.760(13) Å] and the relatively short MnP(C₆H₅)₃ bond lengths [2.260(3) and 2.275(3) Å], compared to the corresponding MnCO and MnP(C₆H₅)₃ bond lengths in other manganese carbonyl triphenylphosphine complexes, are rationalized on the basis that the acetate ligand in this molecule functions primarily as a σ-donor.     

Unusual solid-state behavior in a neutral [2]catenane bearing a hydrolyzable component

A template-directed strategy to forming a bis(diimide) macrocycle through an intermediate asymmetric [2]catenane is reported. Saponification of the ester linkages within the crown ether component is much slower in the mechanically interlocked structure when compared to the free crown. The predominance of a single translational isomer leads to a dimeric structure, resulting in the generation of infinite channels within the crystal lattice. [structure: see text]     

Structure Elucidator: a versatile expert system for molecular structure elucidation from 1D and 2D NMR data and molecular fragments

StrucEluc is an expert system that allows the computer-assisted elucidation of chemical structures based on the inputs of a series of spectral data including 1D and 2D NMR and mass spectra. The system has been enabled to allow a chemist to utilize fragments stored in a fragment database as well as user-defined fragments submitted by the chemist in the structure elucidation process. The association of fragments in this way has been shown to dramatically speed up the process of structure generation from 2D NMR data and has helped to minimize or eliminate the need for user intervention thereby further enabling the vision of automated elucidation. The use of fragments has frequently transformed very difficult 2D NMR elucidation challenges into easily solvable tasks. A strategy to utilize molecular fragments has been developed and optimized based on specific challenging examples. This strategy will be described here using real world examples. Experience gained by solving more than 150 structure elucidation problems from a variety of literature sources is also reviewed in this work.     

Asymmetric hydrogenation of ketones using a ruthenium(II) catalyst containing BINOL-derived monodonor phosphorus-donor ligands

[structure: see text] A series of ruthenium(II) complexes containing BINOL-based monodonor phosphorus ligands have been prepared and applied to the asymmetric catalysis of the hydrogenation of aryl/alkyl ketones. The best ligands for this application are those which contain an aromatic groups with either a methoxide or bromide on the ortho position. Using these ligands, alcohols with ee's of up to 99% are formed.     

Detection of VX contamination in soil through solid-phase microextraction sampling and gas chromatography/mass spectrometry of the VX degradation product bis(diisopropylaminoethyl)disulfide

A solid-phase microextraction (SPME) and gas chromatography-mass spectrometry (GC-MS) sampling and analysis method was developed for bis(diisopropylaminoethyl)disulfide (a degradation product of the nerve agent VX) in soil. A 30-min sampling time with a polydimethylsiloxane-coated fiber and high temperature alkaline hydrolysis allowed detection with 1.0 microg of VX spiked per g of agricultural soil. The method was successfully used in the field with portable GC-MS instrumentation. This method is relatively rapid (less than 1 h), avoids the use of complex preparation steps, and enhances analyst safety through limited use of solvents and decontamination of the soil before sampling.     

Sequential Injection Photometric Determination of Molybdenum Using Organic Wetting Film Extraction

Wetting film extraction was combined with colorimetry to determine nanogram amounts of molybdenum(VI). The simple extraction procedure enhanced sensitivity and selectivity while maintaining a high sample throughput. Extraction and back extraction steps were exploited to exclude interference from the 31 metal species and 11 anions tested. In the first step, molybdenum(VI) was extracted into a toluene film as an ion paired complex. Molybdenum(VI) reacted with thiocyanate to form anionic molybdenum(V) and/or molybdenum(VI) thiocyanate complexes. The complexes were extracted into a toluene film containing tetraheptylammonium bromide as ion pairing reagent. The thiocyanate ligands were displaced by 1,5-diphenylcarbazone (DPC) to form a more intensely colored complex (λ_max= 540 nm). DPC was introduced in the back extraction solvent, methanol. The relative standard deviation was 2.5% for 50 ng ml⁻¹of molybdenum(VI) (n= 10) at a rate of 25 samples h⁻¹. The detection limit (3 × baseline noise) was 2.5 × 10⁻⁸M.