Cyclic Voltammograms of Ferrocene on Multi‐Walled Carbon Nanotubes (MWCNTs)‐Modified Edge Plane Pyrolytic Graphite (EPPG) Electrode in Room Temperature Ionic Liquids (RTILs) of 1‐Ethyl‐3‐Methylimidazolium Tetrafluoroborate (EMIBF4)

In this work, the electrochemical behavior of ferrocene (Fc) was investigated by cyclic voltammetry (CV) in room temperature ionic liquids (RTILs) of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) on glass carbon (GC), edge plane pyrolytic graphite (EPPG) and multi‐walled carbon nanotube (MWCNTs)‐modified EPPG electrodes, respectively. The results demonstrated that on GC electrode, pairs of well‐defined reversible peaks were observed, while for the electrode of EPPG, the peak potential separation (ΔE_p) is obviously larger than the theoretical value of 59 mV, hinting that the electrode of EPPG is distinguished from the commonly used electrode, consistent with the previous proposition that EPPG has many “defects”. To obtain an improved electrochemical response, multi‐walled carbon nanotubes (MWCNTs) were modified on the electrode of EPPG; the increased peak current and promoted peak potential separation not only proved the existence of “defects” in MWCNTs, but also supported that “creating active points” on an electrode is the main contribution of MWCNTs. Initiating the electrochemical research of Fc on the MWCNTs‐modified EPPG electrode in RTILs and verifying the presence of “defects” on both EPPG and MWCNTs using cyclic voltammograms (CVs) of Fc obtained in RTILs of EMIBF₄, is the main contribution of this preliminary work.     

Aza-Morita-Baylis-Hillman reactions of N-(benzylidene)polyfluoroanilines with methyl acrylate and acrylonitrile

Aza-Morita-Baylis-Hillman reactions of N-(benzylidene)polyfluoroanilines 1 with methyl acrylate or acrylonitrile were studied. It was found that Lewis base, solvent and reaction temperature can significantly affect the reaction. Using 3-hydroxyquinuclidine (3-HQD) as a Lewis base in the reactions of 1 with methyl acrylate in DMF, the normal aza-Morita-Baylis-Hillman adducts 3 were formed in moderate to excellent yields. For the reactions of 1 with acrylonitrile, 1,4-diazabicyclo[2.2.2]octane (DABCO) is the best Lewis base giving the corresponding aza-Morita-Baylis-Hillman adducts 4 as the sole product in good to moderate yield. However, upon treatment of 1 with acrolein 2c, the corresponding reaction did not occur even in the presence of a variety of catalysts.     

Studies of synergism for lowering dynamic interfacial tension in sodium alpha-(n-alkyl) naphthalene sulfonate/alkali/acidic oil systems

Alkylnaphthalene sulfonates with high purity were selected as model components to research synergism for lowering interfacial tension (IFT) in surfactant/alkali/acidic oil systems. The dynamic IFTs between alkylnaphthalene sulfonates with different alkyl chain length and n-decane, oleic acid model oil, or Shengli crude oil were measured. The results showed that the alkylnaphthalene sulfonates with different alkyl chain lengths had different synergism with different acidic components and their ionized acids under the same conditions. The synergism for lowering dynamic IFT in alkylnaphthalene sulfonate/alkali/acidic oil systems was controlled by alkylnaphthalene sulfonate concentration, alkyl chain length, alkali concentration, alkali type, and oleic acid concentration: optimal physicochemical conditions were necessary to the best synergism. This indicates that the synergism among added surfactant acidic components in crude oil and their ionized acids is controlled by the ratio of their interfacial concentrations.     

Nitrile-functionalized pyridinium ionic liquids: synthesis, characterization, and their application in carbon-carbon coupling reactions

A series of relatively low-cost ionic liquids, based on the N-butyronitrile pyridinium cation [C(3)CNpy](+), designed to improve catalyst retention, have been prepared and evaluated in Suzuki and Stille coupling reactions. Depending on the nature of the anion, these salts react with palladium chloride to form [C(3)CNpy](2)[PdCl(4)] when the anion is Cl(-) and complexes of the formula [PdCl(2)(C(3)CNpy)(2)][anion](2) when the anion is PF(6)(-), BF(4)(-), or N(SO(2)CF(3))(2)(-). The solid-state structures of [C(3)CNpy]Cl and [C(3)CNpy](2)[PdCl(4)] have been established by single-crystal X-ray diffraction. The catalytic activity of these palladium complexes following immobilization in both N-butylpyridinium and nitrile-functionalized ionic liquids has been evaluated in Suzuki and Stille coupling reactions. All of the palladium complexes show good catalytic activity, but recycling and reuse is considerably superior in the nitrile-functionalized ionic liquid. Inductive coupled plasma spectroscopy reveals that the presence of the coordinating nitrile moiety in the ionic liquid leads to a significant decrease in palladium leaching relative to simple N-alkylpyridinium ionic liquids. Palladium nanoparticles have been identified as the active catalyst in the Stille reaction and were characterized using transmission electron microscopy.     

Forensic identification of explosive oxidizers by electrospray ionization mass spectrometry

The mass spectrometry of a group of inorganic oxidizers was studied using the electrospray ionization technique. It was found that a series of cluster ions were predominant in both positive- and negative-ion mode, allowing for the characterization of the investigated oxidizers. The identity of the recorded cluster ions was further confirmed by using some isotopically labeled compounds and tandem mass spectrometry with collision-induced dissociation. The use of electrospray ionization mass spectrometry for positive identification of major oxidizer components in explosive formulations was demonstrated by three samples of forensic interest.     

Large-scale fabrication of aligned single-walled carbon nanotube array and hierarchical single-walled carbon nanotube assembly

Aligned single-walled carbon nanotubes (SWNTs) and hierarchical SWNT assembly were fabricated by electrospinning. The high fiber elongation and high DC electric field applied during the electrospinning process result in the orientation of the SWNTs along the axial direction of the fiber. The alignment of the electropsun composite fiber transfers this local SWNT orientation to macroscopically aligned SWNTs. After removing the polymer component from the aligned composite fiber, we produced large area aligned SWNTs. The results show that the directional control of SWNT alignment and debundling of SWNTs into individual tubes can be simultaneously realized.     

Single electron emission from the closed-tips of single-walled carbon nanotubes

The single electron emission behaviors and characteristics from the well-defined quantized energy levels, corresponding to localized electronic states at the dome-structure tips, in single-walled carbon nanotubes (SWNTs) are investigated and illuminated by use of the energy level emission model in combination with the first-principles calculations on the electronic structures. Under the external electric field, the confined electrons are emitted simultaneously from each quantized energy level by virtue of the resonant tunneling effects. With increasing applied voltage, the emission current increases monotonically and exponentially up to the first peak value, and then steps into the increasing and decreasing "sawtoothlike" variations in sequence. The negative differential resistance or conductivity and the maximum current for SWNTs are simulated. The influences of localized electronic states and curvatures of the different closed tips on the single electron emission behaviors of SWNTs are evaluated and discussed. Also a few issues and applications relevant to electron emission of carbon nanotubes are addressed.     

Utilization of hypervalent iodine in organic synthesis: A novel and facile two‐step protocol for the synthesis of new derivatives of 1H‐Imidazo[1,2‐b]pyrazole by the cyclocondensation involving α‐Tosyloxyacetophenones

A series of new 2‐aryl‐7‐cyano/ethoxycarbonyl‐6‐methylthio‐1H‐imidazo[1,2‐b]pyrazoles ( 5 ) have been synthesized in moderate to good yields, via a two‐step cyclocondensation procedure of 5‐amino‐4‐cyano/ethoxycarbonyl‐3‐methylthio‐1H‐pyrazole ( 1 ) and α‐bromoacetophenones ( 3 ) or α‐tosyloxyacetophenones ( 2 ), which were prepared by the reactions of acetophenones with [hydroxy(tosyloxy)iodo]benzene (HTIB). The intermediates, 5‐amino‐1‐(aroylmethyl)‐4‐ cyano/ethoxycarbonyl‐3‐methylthio‐1H‐pyrazoles ( 4 ), have been isolated, serving as evidence for the regioselectivity. When utilizing α‐tosyloxy‐acetophenones, the reactions were more eco‐friendly, the reaction time was significantly reduced and the synthetic procedure was more convenient and easier to manipulate. Surprisingly, using potassium carbonate to displace sodium carbonate in the synthesis of 4 , in the case of 1 (R? CN), two novel cyclocondensation products have been isolated and fully characterized, followed by the proposal of a plausible mechanism.     

Configuration of MFI-type zeolite interacting with the probe molecule P(CH<Subscript>3</Subscript>)<Subscript>3</Subscript> – a theoretical study

With P(CH₃)₃ as the probe molecule adsorbed on titanium silicalite (TS-1) zeolite, the special and important role of T12 site in MFI-type zeolite was clearly elucidated. There are altogether three active sites present in TS-1 zeolite with Ti at the T12 site. Owing to the preferential adsorption of probe molecules on the first Brönsted acidic site, the Ti12 center will probably fail to show Lewis acidity. The ionic [HP(CH₃)₃]⁺ species can be stabilized by the first or second Brönsted acidic site, with the former energetically favored. The latter was formed through the transfer of the ionic [HP(CH₃)₃]⁺ species from the first to the second Brönsted acidic site.     

Thermochemistry of rare earth complexes [Ln(Ala)2(Im)(H2O)](ClO4)3 (Ln=Pr, Gd)

The two complexes, [Ln(Ala)₂(Im)(H₂O)](ClO₄)₃ (Ln=Pr, Gd), were synthesized and characterized. Using a solution-reaction isoperibol calorimeter, standard enthalpies of reaction of two reactions: LnCl₃⋅6H₂O(s)+2Ala(s)+Im(s)+3NaClO₄(s)=[Ln(Ala)₂(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l) (Ln=Pr, Gd), at T=298.15 K, were determined to be (39.26±0.10) and (5.33±0.12) kJ mol^–1 , respectively. Standard enthalpies of formation of the two complexes at T=298.15 K, Δ_fH^Θ_m {[Ln(Ala)₂(Im)(H₂O)](ClO₄)₃(s)} (Ln=Pr, Gd), were calculated as –(2424.2±3.3) and –(2443.4±3.3) kJ mol^–1 , respectively.