Preparation and characterization of Mg(II)-, Ca(II) and Cd(II) complexes of 1,2-ethanediol and water

Mixed ligand complexes of different compositions were prepared with water, sulfate ion and 1,2-ethanediol as ligand. IR spectra and the thermoanalytical curves of the complexes were recorded. Oxygen atoms bound by one or two coordinate bonds to the metal ion, or by hydrogen-bonds in the crystal, were observed. As for the water molecule, 1,2-ethanediol molecules of crystal and monohydrate type were found, depending on the type of binding of the oxygen atoms.This revised version was published online in November 2005 with corrections to the Cover Date.     

Efficient synthesis of cellulose furoates in 1-<Emphasis Type="Italic">N</Emphasis>-butyl-3-methylimidazolium chloride

The ionic liquid 1-N-butyl-3-methylimidazolium chloride ([C₄mim]⁺Cl⁻) was investigated as reaction media for the homogeneous acylation of cellulose with 2-furoyl chloride in the presence of pyridine. The preparation of cellulose furoate depending on the reaction conditions, the cellulose type and the pyridine content was studied. Cellulose furoates with a degree of substitution in the range from 0.46 to 3.0 were accessible, i.e., under mild conditions, with a low excess of reagent and in a short reaction time. The products were characterized by elemental analysis, perpropionylation, ¹H- and ¹³C NMR spectroscopy and FTIR spectroscopy. Thomas Heinze is the member of the European Polysaccharide Network of Excellence (EPNOE), www.epnoe.eu     

Synthesis of poly(<Emphasis Type="Italic">N</Emphasis>-methylolacrylamide)/polymethylacrylamide hybrids via frontal free-radical polymerization

In this study, poly(N-methylolacrylamide)/polymethylacrylamide (PNMA/PMAA) hybrids were produced successfully by frontal free-radical polymerization at ambient pressure. In a typical run, the appropriate amounts of reactants (N-methylolacrylamide, NMA; methylacrylamide, MAA) and initiator (ammonium persulfate) were dissolved in dimethyl sulfoxide at ambient temperature. Frontal polymerization (FP) was initiated by heating the wall of the tube with a soldering iron, and the resultant hot fronts were allowed to self-propagate throughout the reaction vessel. Once initiated, no further energy was required for polymerization to occur. The dependences of the front velocity and front temperature on the initiator concentration, reactant dilution, and NMA/MAA components were thoroughly investigated. The front temperatures were between 69 and 116 °C, depending on the persulfate concentration. We have also investigated the FP of PNMA/PMAA hybrids with N-methyl-2-pyrrolidone as solvent. Results show that FP can be exploited as a means for the preparation of PNMA/PMAA hybrids with the potential advantage of higher throughput compared to the traditional mode.     

Supramolecular isomerism in the hydrogen-bonded network of (5<Emphasis Type="Italic">R</Emphasis>,10<Emphasis Type="Italic">R</Emphasis>)-3,8-dihydroxy-5,10-diethoxy-5,10-dihydrochromeno[5,4,3-<Emphasis Type="Italic">cde</Emphasis>]chromene monohydrate

A new compound (5R, 10R)-3,8-dihydroxy-5,10-diethoxy-5,10-dihydrochromeno[5,4,3-cde]chromene monohydrate was obtained from 3,4-dihydroxybenzaldehyde in aerobic basic aqueous ethanol solution in the presence of manganese chloride and triethylamine and crystallized in orthorhombic P2₁2₁2₁ space group (denoted as 1). When 1 was recrystallized from aqueous methanol, it was transformed to another crystal (2) with the same composition but in P2₁/n space group. The drastic difference in the extensive hydrogen bond network makes 1 a 3D and 2 a 2D infinite supramolecular structure, respectively.     

Solvent and thiourea adsorption/intercalation effects on the solid-state electrochemistry of α-phase nickel hydroxide nanoparticles

Nanoparticles of α-phase nickel hydroxide were synthesized by a single-step hydrothermal method using urea as the hydrolytic agent. Precipitated powders were of pure turbostratic α-phase as confirmed by x-ray diffraction profile. The ageing of α-Ni(OH)₂ in 1.0 M alkali solutions is investigated for pure non-intercalated α-Ni(OH)₂ and thiourea intercalated/absorbed α-phase nanomaterials. The α-Ni(OH)₂ powder immobilized on the surface of graphite electrodes shows a gradual α→β phase transformation with continuous voltammetric cycling, and the concentration gradient of water that exists in the layered-double-hydroxide-like interlayers of α-phase and the solution was shown to play a crucial role on the high electrochemical activity of this phase nickel hydroxide. To understand the role of water in the ageing process, concomitant entries of non-aqueous solvents like ethanol and acetonitrile along with thiourea were effected. Cyclic voltammetric measurements of thiourea-treated α-Ni(OH)₂ samples revealed that hydroxyl ion influx during the anodic oxidation depends on the counter flux of solvent molecules, and if the intercalated the solvent is acetonitrile, then the electrochemical activity of α-Ni(OH)₂ reduced drastically; Q _a/Q _c>1 for water as solvent in the interlayers α-Ni(OH)₂ and Q _a/Q _c<1 for ethanol and acetonitrile as solvents. The α-phase gets stabilized in the presence of thiourea with water and ethanol as co-intercalates. Transmission electron microscope images of α-Ni(OH)₂ and thiourea-treated samples show a change in particle size and morphology. Elemental CHNS analysis confirms the presence of sulphur in the thiourea intercalated samples.     

Separation and analysis of glycyrrhizin, 18beta-glycyrrhetic acid and 18alpha-glycyrrhetic acid in liquorice roots by means of capillary zone electrophoresis

Glycyrrhizin is the main active compound of Glycyrrhiza glabra root extracts; according to recent studies, glycyrrhizin and its aglycon, glycyrrhetic acid, have interesting therapeutic properties. A new capillary electrophoretic method has been developed for the separation and quantification of glycyrrhizin, beta-glycyrrhetic acid and its isomer a-glycyrrhetic acid. Separation of the analytes was achieved in less than 3 min on a fused silica capillary, by injecting the samples at the short end of the capillary (effective length: 8.5 cm). The background electrolyte was composed of pH 10.0 carbonate buffer, methanol and ethylene glycol (80/10/10) and contained 0.4% beta-cyclodextrin; indomethacin was used as the internal standard. Diode array detection was used, with quantitative assays carried out at 254 nm. Linearity was found over the 5-200 and 2.5-100 microg mL(-1) concentration ranges for glycyrrhizin and glycyrrhetic acid, respectively. This method has been applied to the determination of the analytes in different matrices (liquorice roots and commercial confectionery products), and to the purity control of beta-glycyrrhetic acid obtained from the hydrolysis of glycyrrhizin. When analysing beta-glycyrrhetic acid and its epimer in roots, the samples were purified by means of a suitable solid-phase extraction (SPE) procedure with Oasis HLB cartridges, which granted good selectivity, eliminating matrix interference.     

Synthesis,characterization and third-order nonlinear optical properties of ruthenium(II) complexes containing 2-(4-nitrophenyl)imidazo[4,5-f] [1,10]phenanthroline

Two novel Ru^II complexes [Ru(phen)₂(PNOPH)]²⁺ and [Ru(dmp)₂ (PNOPH)]²⁺ (phen = 1,10-phenanthroline, dmp = 2,9-dimethyl-1,10-phenanthroline, PNOPH = 2-(4-nitrophenyl)imidazo-[4,5-f][1,10]phenanthroline) and their deprotoned complexes were synthesized and characterized by ES–MS, ¹H - n.m.r, u.v.–vis. and electrochemistry. The crystal structure of the deprotonated complex [Ru(dmp)₂ (PNOP)][ClO₄] · CH₃CN was determined by means of X-ray single crystal diffraction. Nonlinear optical properties of the Ru^II complexes were investigated by Z-scan techniques in DMF solution, and all of them exhibited both NLO absorption and self-defocusing effect. The corresponding effective NLO susceptibilities |³ | of the complexes are 2.39 × 10^-12–5.80 × 10^-12 esu.     

Synthesis and Chemical and Electrochemical Characterization of Fe-S Carbonyl Clusters. X-ray Crystal Structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)

A reinvestigation of the redox behavior of the [Fe(3)(&mgr;(3)-S)(CO)(9)](2)(-) dianion led to the isolation and characterization of the new [Fe(5)S(2)(CO)(14)](2)(-), as well as the known [Fe(6)S(6)(CO)(12)](2)(-) dianion. As a corollary, new syntheses of the [Fe(3)S(CO)(9)](2)(-) dianion are also reported. The [Fe(5)S(2)(CO)(14)](2)(-) dianion has been obtained by oxidative condensation of [Fe(3)S(CO)(9)](2)(-) induced by tropylium and Ag(I) salts or SCl(2), or more straightforwardly through the reaction of [Fe(4)(CO)(13)](2)(-) with SCl(2). The [Fe(6)S(6)(CO)(12)](2)(-) dianion has been isolated as a byproduct of the synthesis of [Fe(3)S(CO)(9)](2)(-) and [Fe(5)S(2)(CO)(14)](2)(-) or by reaction of [Fe(4)(CO)(13)](2)(-) with elemental sulfur. The structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)] were determined by single-crystal X-ray diffraction analyses. Crystal data: for [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)], monoclinic, space group P2(1)/c (No. 14), a = 24.060(5), b = 14.355(6), c = 23.898(13) ?, beta = 90.42(3) degrees, Z = 4; for [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)], monoclinic, space group C2/c (No. 15), a = 34.424(4), b = 14.081(2), c = 19.674(2) ?, beta = 115.72(1) degrees, Z = 4. The new [Fe(5)S(2)(CO)(14)](2)(-) dianion shows a "bow tie" arrangement of the five metal atoms. The two Fe(3) triangles sharing the central Fe atom are not coplanar and show a dihedral angle of 55.08(3) degrees. Each Fe(3) moiety is capped by a triply bridging sulfide ligand. The 14 carbonyl groups are all terminal; two are bonded to the unique central atom and three to each peripheral iron atom. Protonation of the [Fe(5)S(2)(CO)(14)](2)(-) dianion gives reversibly rise to the corresponding [HFe(5)S(2)(CO)(14)](-) monohydride derivative, which shows an (1)H-NMR signal at delta -21.7 ppm. Its further protonation results in decomposition to mixtures of Fe(2)S(2)(CO)(6) and Fe(3)S(2)(CO)(9), rather than formation of the expected H(2)Fe(5)S(2)(CO)(14) dihydride. Exhaustive reduction of [Fe(5)S(2)(CO)(14)](2)(-) with sodium diphenyl ketyl progressively leads to fragmentation into [Fe(3)S(CO)(9)](2)(-) and [Fe(CO)(4)](2)(-), whereas electrochemical, as well as chemical oxidation with silver or tropylium tetrafluoroborate, in dichloromethane, generates the corresponding [Fe(5)S(2)(CO)(14)](-) radical anion which exhibits an ESR signal at g = 2.067 at 200 K. The electrochemical studies also indicated the existence of a subsequent one-electron anodic oxidation which possesses features of chemical reversibility in dichloromethane but not in acetonitrile solution. A reexamination of the electrochemical behavior of the [Fe(3)S(CO)(9)](2)(-) dianion coupled with ESR monitoring enabled the spectroscopic characterization of the [Fe(3)S(CO)(9)](-) radical monoanion and demonstrated its direct involvement in the generation of the [Fe(5)S(2)(CO)(14)](n)()(-) (n = 0, 1, 2) system.     

Parametric Integer Programming Analysis: A Contraction Approach

An algorithm is presented for solving families of integer linear programming problems in which the problems are "related" by having identical objective coefficients and constraint matrix coefficients. The righthand-side constants have the form b + θd where b and d are conformable vectors and θ varies from zero to one.The approach consists primarily of solving the most relaxed problem (θ = 1) using cutting planes and then contracting the region of feasible integer solutions in such a manner that the current optimal integer solution is eliminated.The algorithm was applied to 1800 integer linear programming problems with reasonable success. Integer programming problems which have proved to be unsolvable using cutting planes have been solved by expanding the region of feasible integer solutions (θ = 1) and then contracting to the original region.     

The Use of Versatile Distribution Families in Some Stochastic Inventory Calculations

Previous works on stochastic inventory problems have often assumed that an item's lead time demand follows a "convenient" distribution such as the normal, the γ or the Weibull. First, this paper argues that these convenient distributions may be overly restrictive and unrealistic, and points out the versatility and realism of using four-parameter distributions of the Pearson's and the Schmeiser-Deutsch's systems. Second, using these four-parameter distributions, this paper presents practical `manual" methods for computing the stock-out probability, reorder level and expected lost sales of an inventory item and for solving the lot-size reorder-point model. Some of these methods are actually simpler than the ones developed previously for the more restrictive distributions.