Chemisorption of atomic hydrogen on rhodium: An ab initio cluster-model approach

Interaction of atomic hydrogen with cluster models simulating the Rh(111) surface has been studied at the ab initio SCF level using relativistic non-empirical pseudopotentials and moderately large basis sets. From the bonding parameters, it is seen that chemisorption on the threefold open position is five times more favoured than on the threefold eclipsed one, and the bonding picture is rather different for both active sites. Since two different kinds of adsorbed hydrogen atoms should exist according to various experimental techniques, the present work adds further evidence to the existence of these two types of adsorption and reports some structural parameters which can help to a more detailed characterization in the near future.     

Analogs of propranolol. Synthesis of 3-alkylamino-1-(3-benzo[b]thienyloxy)-2-propanols

The synthesis by two alternative routes of 1-(3-benzo[b]thienyloxy)-3-isopropylamino-2-propanol hydrochloride ( 1a HCl), a thiophenic isoster of Propranolol, and related compounds, is reported. The protecting and enolizing properties of the 2-methoxycarbonyl group on benzo[b]thiophene-3-one, along with its facile removal, are utilized in the first route. In the second one, conversion of 3-bromobenzo[b]thiophene in 1-(3-benzo[b]thienyloxy)-2,3-o-isopropylidenepropane is the key step. On the other hand, hydrolysis of 1-(3-benzo[b]furanyloxy)-2,3-o-isopropylidenepropane to the corresponding diol, in order to obtain a furanic isoster of Propranolol (17a ), was unsuccessful.     

Antiparallel triple helices. Structural characteristics and stabilization by 8-amino derivatives

The structural, dynamical, and recognition properties of antiparallel DNA triplexes formed by the antiparallel d(G#G.C), d(A#A.T), and d(T#A.T) motifs (the pound sign and dot mean reverse-Hoogsteen and Watson-Crick hydrogen bonds, respectively) are studied by means of "state of the art" molecular dynamics simulations. Once the characteristics of the helix are defined, molecular dynamics and thermodynamic integration calculations are used to determine the expected stabilization of the antiparallel triplex caused by the introduction of 8-aminopurines. Finally, oligonucleotides containing 8-aminopurine derivatives are synthesized and tested experimentally using several approaches in a variety of systems. A very large stabilization of the triplex is found experimentally, as predicted by simulations. These results open the possibility for the use of oligonucleotides carrying 8-aminopurines to bind single-stranded nucleic acids by formation of antiparallel triplexes.     

Performance of SuSi: a method for generating atomistic models of amorphous polymers based on a random search of energy minima

The performance of a recently developed method to generate representative atomistic models of amorphous polymers has been investigated. This method, which is denoted SuSi, can be defined as a random generator of energy minima. The effects produced by different parameters used to define the size of the system and the characteristics of the generation algorithm have been examined. Calculations have been performed on poly(L,D-lactic) acid (rho = 1.25 g/cm3) and nylon 6 (rho = 1.084 g/cm(3)), which are important commercial polymers.     

Structural characterization of CeO(2)-ZrO(2)/TiO(2) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) mixed oxide catalysts by XRD, Raman spectroscopy, HREM, and other techniques

Structural characteristics of CeO(2)-ZrO(2)/TiO(2) (CZ/T) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) (V/CZ/T) mixed oxide catalysts have been investigated using X-ray diffraction (XRD), BET surface area, Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques. The CeO(2)-ZrO(2) (1:1 mole ratio) solid solution was deposited over a finely powdered TiO(2) support by a deposition precipitation method. A nominal 5 wt % V(2)O(5) was impregnated over the calcined (773 K) CZ/T mixed oxide carrier by a wet impregnation technique. The obtained CZ/T and V/CZ/T samples were further subjected to thermal treatments from 773 to 1073 K to understand the dispersion and temperature stability of these materials. In the case of CZ/T samples, the XRD results suggest the formation of different cubic and tetragonal Ce-Zr-oxide phases, Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), Ce(0.5)Zr(0.5)O(2), and Ce(0.16)Zr(0.84)O(2) in varying proportions depending on the treatment temperature. With increasing calcination temperature from 773 to 1073 K, the intensity of the lines pertaining to cubic Ce(0.6)Zr(0.4)O(2) and Ce(0.5)Zr(0.5)O(2) phases increased at the expense of cubic Ce(0.75)Zr(0.25)O(2), indicating more incorporation of zirconia into the ceria lattice. The TiO(2) was mainly in the anatase form whose crystallite size also increased with increasing treatment temperature. A better crystallization and more incorporation of zirconia into the ceria lattice was noted when CZ/T was impregnated with V(2)O(5). However, no crystalline V(2)O(5) could be seen from both XRD and RS measurements. In particular, a preferential formation of CeVO(4) compound and an intense tetragonal Ce(0.16)Zr(0.84)O(2) phase were noted beyond 873 K. The HREM results indicate, in the case of CZ/T samples, a well-dispersed Ce-Zr-oxide of the size approximately 5 nm over the bigger crystals ( approximately 40 nm) of TiO(2) when treated at 873 K. The exact structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic fluorite geometry and the TiO(2) is in anatase form. A better crystallization of Ce-Zr-oxides ( approximately 8 nm) over the surface of bigger crystals of TiO(2) was noted at 1073 K. A further enhancement in the crystallite size and zirconia-rich tetragonal phase was noted in the case of V/CZ/T samples. Further, the structure of CeVO(4) formed was also clearly identified in conformity with XRD and RS results.     

UV index experimental values during the years 2000 and 2001 from the Spanish broadband UV-B radiometric network

An analysis is made of experimental ultraviolet erythemal solar radiation data measured during the years 2000 and 2001 by the Spanish UV-B radiation evaluation and prediction network. This network consists of 16 Robertson-Berger type pyranometers for evaluating solar erythemal radiation and five Brewer spectroradiometers for evaluating the stratospheric ozone. On the basis of these data the Ultraviolet Index (UVI) was evaluated for the measuring stations that are located either in coastal regions or in the more densely populated regions inland on the Iberian Peninsula. It has been checked that in most cases the maximum irradiance values corresponded to solar noon, although there were exceptions that could be explained by cloudiness. The maximum experimental values of the UVI were around 9 during the summer, though frequently passing this value at the inland measurement stations. The annual accumulated dose of irradiation on a horizontal plane has also been studied, as well as the evolution through the year in units of energy, standard erythemal doses and minimum erythemal doses, according to different phototypes.     

Rh(II) catalysed intramolecular C-H insertion of diazo substrates in water: a simple and efficient approach to catalyst reuse

Water is an efficient solvent for the Rh2(OAc)4 catalysed intramolecular C-H insertion of a range of diazo substrates without competitive water insertion. Due to the high solubility and stability of the catalyst in water, the catalyst can be efficiently reused.     

Organocatalytic asymmetric assembly reactions: one-pot synthesis of functionalized beta-amino alcohols from aldehydes,ketones, and azodicarboxylates

[reaction: see text] l-Proline catalyzed the enzyme-like direct asymmetric assembly of aldehydes, ketones, and azodicarboxylic acid esters to provide optically active beta-amino alcohols. This assembly reaction uses both aldehydes and ketones as donors in one pot. The aldol-derived stereocenter is formed with a reduced facial selectivity in reactions involving (R)-amino aldehydes. The reactions can be performed on a multigram scale under operationally simple and safe conditions without the requirement of an inert atmosphere or dry solvents.     

Reduction of sulfoxides with boranes catalyzed by MoO2Cl2

The first example of an organic reduction with boranes catalyzed by a high valent oxo-complex is reported. The systems catecholborane/MoO₂Cl₂(H₂O)₂ (5 mol %) and BH₃·THF/MoO₂Cl₂ (5 mol %) proved to be very efficient for the reduction of sulfoxides to the corresponding sulfides in excellent yields.     

On the accuracy of correlation energy calculated by the correlation factor method: first- and second-row atoms

Summary The correlation energy of two- and four-isoelectronic series, a representative example for which the existing spin-density functionals fails, is calculated using the Colle and Salvetti method, considering mono- and multideterminantal wave functions. The results are in agreement with experimental data, and show the potentiality of this method when it is applied to wave functions including the most relevant configurational features. Also, results for the ionization energies and electron affinities of first- and second-row atoms are reported.