Modeling and characterization of cyclic relaxation and ratcheting using the distributed-element model

Constitutive modeling of cyclic relaxation and ratcheting (cumulative inelastic deformation) is developed on the basis of the distributed-element model (DEM). Although the original DEM is capable of describing general, elastic–plastic behavior for cyclically stabilized materials, it has the inadequacy of not being able to account for the effect of cyclic relaxation and ratcheting. By introducing the nonlinear kinematic hardening rule proposed by Armstrong and Frederick into element behavior of the DEM, the model becomes effective in characterizing the behavior of cyclic relaxation and ratcheting. Validation of the modified DEM is conducted by simulating cyclic behavior of various metal materials, including CS 1018, heat-treated rail steel, and Grade 60 steel. The results show that the modified DEM demonstrates realistic behavior of materials in both uniaxial and biaxial cyclic relaxation and ratcheting. Furthermore, detailed investigation of element behavior in the model provides us with additional insight into complex behavior and characteristics of materials in cyclic relaxation and ratcheting.     

An iterative calculation to derive extinction-to-backscatter ratio based on lidar measurements

The aerosol optical thickness (AOT) is an important parameter for understanding the radiative impact of aerosols. AOT based on lidar measurements is often limited by its finite detection range. In this paper, we have reported a method of fitting and iterative calculation to derive the extinction profile of background aerosols from 0 to 30 km at 532 nm, which is virtually the AOT of the entire atmosphere. The mean extinction derived from this method at the ground level tallies with visibility measurement and it is also consistent with the sun-photometer data, within experimental error. These data have been further treated to study the dust cases. For most of the cases, transmission losses were determined to estimate the extinction as well as lidar ratio. The result of the analysis shows that for background aerosols, a mean lidar ratio of 47±15 sr was found. For dust layers, a mean lidar ratio of 44±19 sr and an optical thickness of 0.53±0.49 were determined at 532 nm.     

Adsorptive stripping voltammetry of some trace elements in biological samples,II: Nickel,arsenic, aluminium and selenium

A study of the adsorptive stripping voltammetry of nickel, aluminium, selenium and arsenic is reported in which 2,5-dimercapto-1,3,4-thiadiazole (DMTD) has been used as a chelating agent. By a suitable choice of deposition potential, deposition time, reagent reaction time and other operating conditions, the determination of the four elements could be achieved.By the use of benzyltrimethyl ammonium methoxide as a digesting solvent, it was possible to apply the procedure to the direct determination of the four elements in biological samples.     

Olefin epoxidation with bis(trimethylsilyl) peroxide catalyzed by inorganic oxorhenium derivatives. Controlled release of hydrogen peroxide.

The replacement of organometallic rhenium species (e.g., CH(3)ReO(3)) by less expensive and more readily available inorganic rhenium oxides (e.g., Re(2)O(7), ReO(3)(OH), and ReO(3)) can be accomplished using bis(trimethylsilyl) peroxide (BTSP) as oxidant in place of aqueous H(2)O(2). Using a catalytic amount of a proton source, controlled release of hydrogen peroxide helps preserve sensitive peroxorhenium species and enables catalytic turnover to take place. Systematic investigation of the oxorhenium catalyst precursors, substrate scope, and effects of various additives on olefin epoxidation with BTSP are reported in this contribution.     

Synthesis of UV‐cured acrylic–silica hybrid nanocomposites from dendritic acrylic oligomer and acrylic‐functionalized silica

An acrylic–silica hybrid polymeric nanocomposite, comprising well‐distributed silica nanoparticles in acrylic matrix, has been synthesized at a markedly rapid rate from a dendritic acrylic oligomer (DAO) and an acrylic‐functionalized silica (A‐silica) via UV‐curing. A‐silica was made by functioning colloidal silica nanoparticles with 3‐methacryloxypropyltrimethoxysilane (MATMS) and DAO was formed by reacting 1,5‐diamino‐2‐methylpentane (MPMDA) with trimethylopropane triacrylate (TMPTA). The MATMS has been found either doubly or singly bonded to silica nanoparticles but not triply bonded, and the inclusion of MATMS into the siloxane network structure increases the size of silica nanoparticles. The well distribution of A‐silica and its good compatibility with DAO cause an increase in T_d of the acrylic–silica hybrid material. Silica nanoparticles are too small to cause any significant light scattering, and do not have deleterious effects on transparency. The “hybrid‐on‐polyethylene terephathalate” films exhibited satisfactory hardness and surface roughness because of silica nanoparticles. The preparation as well as the characterization of the constituting species and the final hybrid material are described in detail. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8149–8158, 2008     

Efficiency decomposition in two-stage data envelopment analysis: An application to non-life insurance companies in Taiwan

The efficiency of decision processes which can be divided into two stages has been measured for the whole process as well as for each stage independently by using the conventional data envelopment analysis (DEA) methodology in order to identify the causes of inefficiency. This paper modifies the conventional DEA model by taking into account the series relationship of the two sub-processes within the whole process. Under this framework, the efficiency of the whole process can be decomposed into the product of the efficiencies of the two sub-processes. In addition to this sound mathematical property, the case of Taiwanese non-life insurance companies shows that some unusual results which have appeared in the independent model do not exist in the relational model. In other words, the relational model developed in this paper is more reliable in measuring the efficiencies and consequently is capable of identifying the causes of inefficiency more accurately. Based on the structure of the model, the idea of efficiency decomposition can be extended to systems composed of multiple stages connected in series.     

Synthesis of simplified analogues of eleutherobin via a Claisen rearrangement/RCM strategy

The enantioselective synthesis of a number of simplified analogues of the cytotoxic natural product eleutherobin is reported.     

Effective Synthesis of N‐Arylformamide from α‐Halo‐N‐arylacetamides

A convenient synthetic method for N‐arylformamide derivatives was successfully developed by reacting α‐iodo‐N‐arylacetamides with formamide. This method was applicable to α‐iodo‐N‐arylacetamide substrates bearing electron‐donating or electron‐withdrawing groups, N‐(benzo[d][1,3]dioxol‐5‐yl)‐2‐iodoacetamide, 2‐iodo‐N‐(pyridin‐2‐yl)acetamide, and 2‐iodo‐N‐(naphthalen‐4‐yl)acetamide to give the corresponding N‐arylformamides in moderate to excellent yields (65–94%). A plausible mechanism was proposed to account for the new transformation.