A Nonenzymatic Glucose Sensor Using Nanoporous Platinum Electrodes Prepared by Electrochemical Alloying/Dealloying in a Water‐Insensitive Zinc Chloride‐1‐Ethyl‐3‐Methylimidazolium Chloride Ionic Liquid

We report here a nonenzymatic sensor by using a nanoporous platinum electrode to detect glucose directly. The electrode was fabricated by electrochemical deposition and dissolution of PtZn alloy in zinc chloride‐1‐ethyl‐3‐methylimidazolium chloride (ZnCl₂‐EMIC) ionic liquid. Both SEM and electrochemical studies showed the evidences for the nanoporous characteristics of the as‐prepared Pt electrodes. Amperometric measurements allow observation of the electrochemical oxidation of glucose at 0.4 V (vs. Ag/AgCl) in pH 7.4 phosphate buffer solution. The sensor also demonstrates significant reproducibility in glucose detection; the higher the roughness factor of the Pt electrode, the lower the detection limit of glucose. The interfering species such as ascorbic acid and p‐acetamidophenol can be avoided by using a Pt electrode with a high roughness factor of 151. Overall, the nanoporous Pt electrode is promising for enzymeless detection of glucose at physiological condition.     

Synthesis of Blue‐, Green‐, Yellow‐, and Red‐Emitting Graphene‐Quantum‐Dot‐Based Nanomaterials with Excitation‐Independent Emission

A one‐pot method is described for the preparation of graphene quantum dots/graphene oxide (GQDs/GO) hybrid composites with emission in the visible region, through heteroatom doping and hydroxyl‐radical‐induced decomposition of GO. The NH₄OH‐ and thiourea‐mediated dissociation of H₂O₂ produces hydroxyl radicals. Treatment of GO with hydroxyl radicals results in the production of small‐sized GO sheets and GQDs, which self‐assemble to form GQDs/GO through strong π–π interactions. For example, the reaction of GO with a mixture of NH₄OH and H₂O₂ for 40, 120, and 270 min generates yellow‐emitting GQDs/GO (Y‐GQDs/GO), green‐emitting GQDs/GO, and blue‐emitting GQDs, while red‐emitting GQDs/GO (R‐GQDs/GO) are prepared by incubating GO with a mixture of thiourea and H₂O₂. From the analysis of these four GQD‐based nanomaterials by transmission electron microscopy, atomic force microscopy, and fluorescence lifetime spectroscopy, it is found that this tunable fluorescence wavelength results from the differences in particle size. All four GQD‐based nanomaterials exhibit moderate quantum yields (1–10%), nanosecond fluorescence lifetimes, and excitation‐independent emissions. Except for R‐GQDs/GO, the other three GQD‐based nanomaterials are stable in a high‐concentration salt solution (e.g., 1.6 m NaCl) and under high‐power irradiation, enabling the sensitive (high‐temperature resolution and large activation energy) and reversible detection of temperature change. It is further demonstrated that Y‐GQD/GO can be used to image HeLa cells.     

Photoionization dynamics in pure helium droplets

The photoionization and photoelectron spectroscopy of pure He droplets were investigated at photon energies between 24.6 eV (the ionization energy of He) and 28.0 eV. Time-of-flight mass spectra and photoelectron images were obtained at a series of molecular beam source temperatures and pressures to assess the effect of droplet size on the photoionization dynamics. At source temperatures below 16 K, where there is significant production of clusters with more than 10(4) atoms, the photoelectron images are dominated by fast electrons produced via direct ionization, with a small contribution from very slow electrons with kinetic energies below 1 meV arising from an indirect mechanism. The fast photoelectrons from the droplets have as much as 0.5 eV more kinetic energy than those from atomic He at the same photon energy. This result is interpreted and simulated within the context of a "dimer model", in which one assumes vertical ionization from two nearest-neighbor He atoms to the attractive region of the He2+ potential energy curve. Possible mechanisms for the slow electrons, which were also seen at energies below IE(He), are discussed, including vibrational autoionizaton of Rydberg states comprising an electron weakly bound to the surface of a large HeN+ core.     

Preparation, thermal properties, morphology, and microstructure of phosphorus-containing epoxy/SiO2 and polyimide/SiO2 nanocomposites

A phosphorus-containing tri-ethoxysilane (dopo-icteos) reacting from the nucleophilic addition reaction of 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (dopo) and 3-(trieoxysilyl) isocyanate (icteos) was synthesized. The structure of dopo-icteos was confirmed by ¹H, ¹³C, ³¹P NMR and IR spectra. A triethylamine catalyzed mechanism for the dopo-icteos synthesis was proposed and verified by NMR spectra. The phosphorus-containing epoxy/SiO₂ and polyimide/SiO₂ nanocomposites were prepared from the in-situ curing of diglycidyl ether of bisphenol A (DGEBA)/4,4-diaminodiphenylmethane(DDM)/dopo-icteos, and imidization of poly(amic acid) of pyromellitic dianhydride (PMDA)/4,4′-oxydianiline (ODA)/dopo-icteos, respectively. The microstructure and morphology were investigated by ²⁹Si NMR, scanning electron microscope (SEM), EDS (Si and P mapping) analysis and atomic force microscope (AFM). The thermal properties, flame retardancy and dielectric properties of the organic-inorganic hybrids were investigated by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), limiting oxygen index (LOI), thermal gravimetric analysis (TGA) and dielectric analyzer (DEA).     

Effect of Surface‐Hydroxylated CdS Nanoparticles on the Morphological Transformation of Polystyrene‐block‐Poly(ethylene oxide) Thin Films

Summary: Polystyrene‐block‐poly(ethylene oxide) (SEO) block copolymer thin films, in which CdS clusters have been sequestered into the PEO domains of the SEO block copolymers, are found to induce the morphological transformation of PEO from cylinders to spheres, as shown by using atomic force microscopy (AFM), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). This transformation is caused by the presence of hydrogen‐bonding interactions between surface‐hydroxylated CdS and PEO, as confirmed by nuclear magnetic resonance (NMR) studies.

Morphological transformation of PEO cylinders into CdS/PEO spheres by hydrogen‐bonding interactions between surface‐hydroxylated CdS and PEO.     

Cover Picture

The cover picture shows linear motor molecules in action on a silicate support. Under the spotlight, tethered threadlike polyether chains (pink) intercepted by electron‐donating naphthalene units (red) doff and don electron‐accepting cyclobis(paraquat‐p‐phenylene) girdles (blue). Their risque actions are revealed by the luminescence of the naphthalene units when the girdles are removed. The temporal sequence (left to right) shows the bare thread donning a girdle and then doffing it under the influence of light. The action is attentively monitored by the luminescence spectra; the intensity increases when the girdle is doffed and is quenched when it is donned. More about this process is reported by Zink, Stoddart, and co‐workers on p. 2447 ff.     

Synthesis and characterization of chitosan‐modified polymethyl methacrylate latex particles

Stable chitosan‐modified polymethyl methacrylate (PMMA) latex particles were prepared by using 2,2′‐azobis(2‐amidinopropane) dihydrochloride (V‐50) as the cationic initiator. The polymerization rate (R_p) is controlled by the V‐50 concentration ([V‐50]) and R_p is less sensitive to the chitosan concentration ([C]) used in the synthesis work. The reaction system follows Smith–Ewart Case III kinetics due to the relatively large particles produced. The zeta potential data show that the isoelectric point (pI) of the latex particles is 10.7. The amounts of V‐50 (C_V‐50) and chitosan (C_c) ultimately incorporated into the particles correlate reasonably well with [V‐50] and [C], respectively. At pH 7, the quantity of the negatively charged bovine serum albumin (BSA, pI = 4.8) adsorbed on the positively charged chitosan‐free particles (Q) via the electrostatic interaction increases with increasing C_V‐50. However, Q is relatively insensitive to changes in C_c. This result implies that only the outermost region of the hairy chitosan‐modified particles is available for adsorption of the relatively large protein species. Colloidal stability shows a significant influence on the BSA adsorption process. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1489–1499, 1999     

Theoretical studies on the electronic and optical properties of arene‐ versus fluoroarene‐thiophene co‐oligomer

A series of regiochemically varied and core size extension‐modulated arene‐ and fluoroarene‐thiophene co‐oligomers and the unsubstituted sexithiophene α6T were investigated theoretically to explore their electronic and optical properties. These phenylene‐thiophene oligomers show great potential for application in organic light‐emitting diodes (OLEDs), organic diode lasers, and organic thin‐film transistors (OTFTs) because of their feasible tuning of optical and electronic properties by the various structural tunings. Density functional theory (DFT) and the ab initio HF were employed to investigate the geometric and electronic structures of the oligomers in the ground state, and the singles configuration interaction (CIS) methods were used to study the lowest singlet excited state. The lowest excitation energies (E_gs), the radiative lifetime τ, and the maximal absorption/emission wavelength of the oligomers were studied within time‐dependent DFT (TDDFT). All calculations were performed using the 6‐31G(d) basis set. The results show that the HOMOs, LUMOs, energy gaps, ionization potentials (IPs), electron affinities (EAs), and reorganization energies are significantly affected by the various structural tunings in these co‐oligomers, which is important for the improvement of the hole and electron injection into OLEDs. Interestingly, the LUMO energy of 1b , 2b , and 3b is lower than that of α6T and 1a , 2a , 3a by about 0.12 ～ 0.47 eV, indicating that the fluorophenyl‐substitution has significantly improved the electron injection properties of the oligomers. Copyright © 2008 John Wiley & Sons, Ltd.     

Bipyridine‐Modulated Palladium‐Catalyzed Oxidative Heck‐Type Reactions of Arylboronic Acids with Olefins

We have demonstrated that 4,4′‐dimethyl 2,2′‐bipyridine as ligand for Pd(II) catalysts was very efficient for oxidative Heck‐type coupling reaction of arylboronic acids with olefins in DMA or CH₃CN under atm air at 80 °C. The presence of chelated bipyridine ligand isindispensable to achieve high reaction yields and to suppress the formation of biphenyl as homocoupled byproduct.     

Simultaneous derivatization and extraction of primary amines in river water with dynamic hollow fiber liquid-phase microextraction followed by gas chromatography-mass spectrometric detection

A one-step derivatization and extraction technique for the determination of primary amines in river water by liquid-phase microextraction (LPME) is presented. In this method the primary amines are derivatized with pentafluorobenzaldehyde (PFBAY) in aqueous solution and extracted by dynamic hollow fiber-protected-LPME (HF-LPME) simultaneously. The effects of solvent selection, sample agitation, extraction time, extraction temperature and salt concentration on the extraction performance are investigated. High enrichments (172-244-fold) and good repeatabilities (RSD less than 7.2%) were obtained. Linearity in this developed method was ranging from 1 to 500 ng/ml, and the correlation coefficients (R2) were between 0.992 and 0.998. Comparisons of sensitivity and precision between dynamic HF-LPME and single-drop liquid-phase microextraction (SDME) were also made.