Hydrogenation of xylenes over supported Pt catalysts. Influence of different variables on their catalytic activity

In this work we studied and compared the catalytic activity of various supported Pt systems on the gas-phase hydrogenation of o-, m- and p-xylene. We analyzed the influence of different catalyst preparation variables (solvent, precursor, salt, support and catalyst reduction temperature used) on the catalytic activity and selectivity towards the corresponding cis-and trans-dimethylcyclohexanes.

---

- o-, m- -. (, , ) - -.

     

Synthesis and characterization of MCM-48 tubular membranes

MCM-48 membranes have been prepared on alumina supports of different pore sizes. A battery of characterization techniques has been used to study the physical properties and the quality of the membranes prepared. The highest quality membranes were prepared on supports with pore size of up to 60 nm. The MCM-48 membranes were tested in the separation of gas phase mixtures and a cyclohexane/O₂ selectivity higher than 270 was obtained. The selective separation of organic compounds from inert components is a result of the cooperative effects of capillary condensation in MCM-48 pores and of the specific interactions of the permeating compounds and the membrane material.     

Determination of Inorganic Ions in Fertilizer Industry Wastewater by Ion Chromatography

The aim of this work is development of methodology for analysis of inorganic cations (sodium, ammonium, potassium, magnesium and calcium) in fertilizer industry wastewater. Method development includes optimization of eluent flow rate and concentration of eluent competing ion in order to obtain optimal separation within reasonable analysis time. For that purpose artificial neural network retention model was developed and used in combination with normalized resolution product criteria function. Developed artificial neural network retention model shows good predictive ability R² ≥ 0.9983. The determined ion chromatographic parameters enable baseline separation of all components of interest. By performing validation procedure and number of statistical tests it is shown that developed ion chromatographic method has superior performance characteristic: linearity R² ≥ 0.9984, recovery = 99.81% − 99.44%, repeatability RSD ≤ 0.52%. That result proves that proposed method can be used for routine monitoring analysis in fertilizer industry.     

Synthesis,Structure and Reactivity of [1, 2‐Bis(diphenylphosphinite)ethane]bromotricarbonylmanganese(I) with Reactions of Phosphites,Phosphonites. and Phosphinites

The manganese carbonyl complex [MnBr(CO)₃ L ] ( 1 ), where L = Ph₂POCH₂CH₂OPPh₂, was prepared by reacting [MnBr(CO)₅] with the bidentate ligand 1, 2‐Bis(diphenylphosphinite)ethane. From this compound and the appropriate phosphite, phosphinite or phosphonite ligands were synthesized the complexes [MnBr(CO)₂ LL ′], where L ′ = P(OMe)₃ ( 2 ) or P(OEt)₃ ( 3 ) and [MnBr(CO)₃ L ′₂], where L ′ =PPh(OEt)₂ ( 4 ) or PPh₂(OEt) ( 5 ). The obtained compounds have been characterized by elemental analysis, mass spectrometry, IR and NMR (¹H, ¹³C and ³¹P) spectroscopies and X‐ray diffractometry for the complexes 1 , 4 and 5 .     

Determination of cadmium,aluminium, and copper in beer and products used in its manufacture by electrothermal atomic absorption spectrometry

Procedures were developed for determining cadmium, aluminium, and copper in beer and the products used in its manufacture by electrothermal atomic absorption spectrometry. Beer samples were injected into the furnace and solid samples were introduced as suspensions after preparation in a medium containing hydrogen peroxide, nitric acid, and ammonium dihydrogen phosphate for cadmium atomization. Calibration was performed with aqueous standards, and characteristic masses and detection limits were, respectively, 1 and 0.3 pg for cadmium, 18 and 5.4 pg for aluminium, and 5.6 and 6.8 pg for copper. Different samples of beer, wort, brewer's yeast, malt, raw grain, and hops were analyzed by the proposed procedures. Cadmium was found in low concentrations (0.001-0.08 microg/g and 0-1.3 ng/mL); copper (3-13 microg/g and 25-137 ng/mL) and aluminium (0.6-9 microg/g and 0.1-2 microg/mL) were found at higher levels. The reliability of the procedure was confirmed by comparing the results obtained with others based on microwave oven sample digestion, and by analyzing several certified reference materials.     

Rapid determination of lead, cadmium and thallium in cements using electrothermal atomic absorption spectrometry with slurry sample introduction

 A method is proposed for the determination of Pb, Cd and Tl in cements by ETAAS. The samples are suspended in a medium containing 10% v/v ethanol and 1% v/v both conc. nitric and hydrofluoric acids and are directly introduced into the electrothermal atomizer. The drying stage is performed by programming a 400 °C temperature, a ramp time of 5 s and a hold time of 30 s on the power supply to the atomizer. No ashing step is used. Atomization is carried out at 2100, 1800 and 1700 °C for Pb, Cd and Tl, respectively. For Cd determination, ammonium dihydrogen phosphate is added to the suspension medium. No modifier other than hydrofluoric acid is required for the Pb and Tl determination. It is shown that the results obtained by using direct calibration with aqueous standards for five commercial samples agree with those found by means of the standard additions method. Received: 29 March 1996/Revised: 24 May 1996/Accepted: 30 May 1996     

Formal total synthesis of β-pipitzol

(±)-$\text{O}$-methylperezone ($\text{1b}$) was obtained by selective oxidative demethylation of (±)-leucoperezone trimethyl ether ($\text{4a}$). Compound ($\text{4a}$) was prepared by condensation of 2,3,5-trimethoxytoluene ($\text{5e}$) with 6-methyl-5-hepten-2-one, followed by reductive removal of the tertiary alcohol. The aromatic precursor $\text{5e}$ was prepared in four steps from 2,3-dimethoxytoluene ($\text{5a}$) and, alternatively, in three steps from 5-bromoveratraldehyde ($\text{6a}$). Racemic $\text{1b}$ and $\text{4a}$ were directly compared with the optically active molecules prepared from natural R(-)-perezone ($\text{1a}$).     

环状芴基张力半导体拉曼光谱理论与实验研究

环状芴基张力半导体由于其特殊的分子结构，发射状排布的p轨道和纳米级空腔等诸多特点，引起了科学家广泛的关注.相对于直链型芴基半导体，环状芴基张力半导体展现出独特的光电性质.然而，迄今为止其振动性质没有被报道.对四元环芴的晶体与直链四聚芴粉末样品进行拉曼光谱表征和归一化处理，并结合理论计算.结果表明，与直链寡聚芴相比，环芴类似于碳纳米管的G峰发生了偏移，并且低频区域拉曼频移峰的峰强增加.其原因是由于张力的引入，改变了芴基主链的骨架和电子结构，加强芴骨架上π电子离域，同时使环芴中每个芴单元都参与到振动中.该研究结果为芴基张力半导体材料拉曼光谱的研究提供了一定的工作基础.