Determination of aluminum in highly concentrated iron samples: Study of interferences using high-resolution continuum source atomic absorption spectrometry

High-resolution continuum source atomic absorption spectrometry (HR-CS AAS) has been used to investigate spectral and non-spectral interferences found with a conventional line source atomic absorption spectrometer in the determination of aluminum in pharmaceutical products containing elevated iron and sugar concentrations. A transversely heated graphite furnace was used as the atomizer in both spectrometers. The two most sensitive aluminum lines at 309.3 nm and 396.2 nm were investigated and it was found that an iron absorption line at 309.278 nm, in the vicinity of the aluminum line at 309.271 nm, could be responsible for some spectral interference. The simultaneous presence of iron and the organic components of the matrix were responsible for radiation scattering, causing high continuous and also structured background absorption at both wavelengths. The aluminum and iron absorption could not be separated in time, i.e., the iron interference could not be eliminated by optimizing the graphite furnace temperature program. However, an interference-free determination of aluminum was possible carrying out the measurements with HR-CS AAS at 396.152 nm after applying least squares background correction for the elimination of the structured background. Analytical working range and other figures of merit were determined and are presented for both wavelengths using peak volume registration (center pixel ± 1) and the center pixel only. Limits of detection and characteristic masses ranged from 1.1 to 2.5 pg and 13 to 43 pg, respectively. The method was used for the determination of the aluminum contamination in pharmaceutical formulations for iron deficiency treatment, which present iron concentrations from 10 to 50 g l^− 1. Spike recoveries from 89% to 105% show that the proposed method can be satisfactorily used for the quality control of these formulations.     

On the additivity of basis set effects in some simple fluorine containing systems

The reactions F + H₂ → HF + H, HF → H + F, F → F⁺ + e^? and F + e^? → F^? were used as simple test cases to assess the additivity of basis set effects on reaction energetics computed at the MP4 level. The 6-31G and 6-311G basis sets were augmented with 1, 2, and 3 sets of polarization functions, higher angular momentum polarization functions, and diffuse functions (27 basis sets from 6-31Gd, p) to 6-31 ++ G(3df, 3pd) and likewise for the 6-311G series). For both series substantial nonadditivity was found between diffuse functions on the heavy atom and multiple polarization functions (e.g., 6-31 + G(3d, 3p) vs. 6-31 + G(d, p) and 6-31G(3d, 3p)). For the 6-311G series there is an extra nonadditivity between d functions on hydrogen and multiple polarization functions. Provided that these interactions are taken into account, the remaining basis set effects are additive to within ±0.5 kcal/mol for the reactions considered. Large basis set MP4 calculations can also be estimated to within ±0.5 kcal/mol using MP2 calculations, est. E_MP4(6-31 ++ G(3df, 3pd)) ≈ E_MP4(6-31G(d, p)) + E_MP2(6-31 ++ G(3df, 3pd)) – E_MP2(6-31G(d, p)) or E_MP4(6-31 + G(d, p) + E_MP2(6-31 ++ G(3df, 3pd)) – E_MP2(6-31 + G(d, p)) and likewise for the 6-311G series.     

Surprising Homolytic Gas Phase Co−C Bond Dissociation Energies of Organometallic Aryl-Cobinamides Reveal Notable Non-Bonded Intramolecular Interactions

Aryl-cobalamins are a new class of organometallic structural mimics of vitamin B₁₂ designed as potential ‘antivitamins B₁₂’. Here, the first cationic aryl-cobinamides are described, which were synthesized using the newly developed diaryl-iodonium method. The aryl-cobinamides were obtained as pairs of organometallic coordination isomers, the stereo-structure of which was unambiguously assigned based on homo- and heteronuclear NMR spectra. The availability of isomers with axial attachment of the aryl group, either at the ‘beta’ or at the ‘alpha’ face of the cobalt-center allowed for an unprecedented comparison of the organometallic reactivity of such pairs. The homolytic gas-phase bond dissociation energies (BDEs) of the coordination-isomeric phenyl- and 4-ethylphenyl-cobinamides were determined by ESI-MS threshold CID experiments, furnishing (Co−C )-BDEs of 38.4 and 40.6 kcal mol⁻¹, respectively, for the two β-isomers, and the larger BDEs of 46.6 and 43.8 kcal mol⁻¹ for the corresponding α-isomers. Surprisingly, the observed (Co−C )-BDEs of the Co_β-aryl-cobinamides were smaller than the (Co−C )-BDE of Co_β-methyl-cobinamide. DFT studies and the magnitudes of the experimental (Co−C )-BDEs revealed relevant contributions of non-bonded interactions in aryl-cobinamides, notably steric strain between the aryl and the cobalt-corrin moieties and non-bonded interactions with and among the peripheral sidechains.     

Coenzyme F430 from Methanogenic Bacteria: Mechanistic studies on the reductive cleavage of sulfonium ions catalyzed by F430 pentamethyl ester

Mechanistic questions regarding the reductive cleavage of sulfonium ions by the Ni^I form of coenzyme F430 pentamethyl ester (F430M) were addressed in a series of kinetic studies and isotope labeling experiments. In neat DMF, methane formation from dialkyl(methyl)sulfonium ions consistently showed a delay time of ca. 1 h. In the presence of excess propanethiol, no delay was observed and methane formation followed pseudo-first-order kinetics with a logarithmic dependence of the initial rate on the concentration of propanethiol. From the temperature dependence of the reaction rate, an estimate for the activation parameters of ΔH^# = 49 kJ mol^?1 and (apparent) ΔS# = –114 J K^?1 mol^?1 was derived. The observation of deuterium incorporation into methane from (CH₃)₂CHOD, but not from (CH₃)₂CDOH, indicates that the fourth H-entity is introduced into CH₄ as a proton, and that free CH₃ radicals are not involved. In contrast to the reaction with the homogeneous one-electron reductant sodium naphthalide, the F430M-catalyzed reduction of mixed dialkyl(methyl)sulfonium ions showed a pronounced selectivity for the cleavage of Me? S over that of alkyl-S (alkyl ≠ Me) bonds. Mechanisms that are consistent with these results, as well as possible explanations for the time delay and the apparent highly negative entropy of activation, are discussed.     

Preparation and characterization of fused-silica capillary columns coated with <Emphasis Type="Italic">m</Emphasis>-carborane–siloxane copolymers for gas chromatography

The carborane–siloxane copolymers Dexsil 300, a 34.5% bis(dimethylsilyl)-m-carborane–65.5% dimethylsiloxane copolymer, and Dexsil 400, a 24.9% bis(dimethylsilyl)-m-carborane–50.8% dimethyl, 24.3% methylphenylsiloxane copolymer, were coated on fused silica capillary columns and their gas chromatographic properties were evaluated. Their selectivity was evaluated using both Rohrschneider–McReynolds constants and triacylglycerol indices. The bis(dimethylsilyl)-m-carborane unit turned out to be equivalent to two dimethylsiloxy units and one half of a diphenylsiloxy unit. The m-carborane unit was found to cause a 15–25 K shift in the elution temperature between 120 and 360 °C. The working range was from 20 and 0 °C to 380 °C for Dexsil 300 and Dexsil 400, respectively. The column bleeding levels at 380 °C were below 20 and 15 pA for Dexsil 300 and Dexsil 400, respectively.     

Azobenzene-containing polyamic acid with excellent Langmuir-Blodgett-Kuhn film formation behavior suitable for all-optical switching

To generate command surfaces for all-optical switching, highly ordered polymeric Langmuir-Blodgett-Kuhn (LBK) multilayers were fabricated onto silicon substrates and gold-coated optical glass slides from novel azobenzene-bearing polyamic acid systems. Pronounced Bragg peaks and well-defined Kiessig fringes observed in the X-ray reflectivity measurement for samples on silicon substrates indicate that these films possess a regularly repeated Y-type LBK multilayer structure and ultrasmooth surfaces. Fourier transform infrared (FT-IR) spectra taken by grazing incidence reflection suggest specific orientations of the functional groups in the layers. The excellent film-forming properties of the polyamic acid allow for a smooth buildup of several hundreds of layers of the LBK films onto gold-coated glass slides, which in turn allows for determining the geometrical thickness and the anisotropic refractive indices of the films by using optical waveguide spectroscopy. Interestingly, the probe laser beam induced a distinct fluorescence signal from the films, which remained even after the film underwent a thermal imidization process at 160 degrees C for 8 h in vacuo. LBK films fabricated from these compounds can be successfully applied for all-optically switching the alignment of liquid crystals by irradiation with light of different wavelengths.     

Bond lengthening and through-bond interactions in p,p'-dibenzene and related molecules

The structure of p,p'-dibenzene (PDB) has been investigated by full geometry optimizations using the empirical force field (EFF) and MINDO/3 methods. While other structural parameters are in good agreement, the central bond length calculated by MINDO/3 (1.595 Å), as confirmed by an ab initio (STO-3G basis set) optimization (1.596 Å), is in striking contrast to the corresponding length calculated by EFF (1.543 Å). A detailed analysis of the electronic structure of PDB based on a quantitative perturbational molecular orbital treatment reveals that through-bond coupling of the four π systems is responsible for an elongation of the σ bond which mediates this interaction. Further studies using the EFF and MINDO/3 approaches demonstrate that extended C-C single bonds can arise even in structures with fewer than four π systems. The effect of substituents on the central bond length in PDB has been briefly investigated. (MINDO/3). A variety of other structures have been identified in which bond lengthening may result from through-bond coupling.     

Die Zusammensetzung der Neutrallipide aus normalen Hirnen alter Menschen

The chemical composition of lipids from six human brains (60–73 years) is reported. The total lipids out of cortex, white matter, diencephalon and cerebellum, pons, and medulla oblongata have been isolated and the neutral lipids have been separated in cerebrosides, sphingomyelines, and lecithins. The highest amount of pure lipids is found in the white matter, the lowest in the cortex. The relation of neutral lipids to acid lipids as well as the amount of cholesterol are about equal for all regions. The white matter shows more cerebrosides and sphingomyelines than the cortex, the opposite being the case for lecithins. The differences are strongly significant. The fatty acids out of the different pure lipid fractions have been analysed as esters by gas chromatography. Stearic and lignoceric acid, and cerebronic and hydroxy nervonic acid respectively are main components of cerebrosides, with only little differences for the different brain regions. The fatty acids of sphingomyelines consist mainly of stearic and nervonic acid; in the white matter these two acids are present about in the same quantity, whereas stearic acid dominates in the cortex and the other sections. Lecithins contain above all palmitic and oleic acid. The amount of the latter in the white matter is higher than that of palmitic acid.     

Dissoziative ionisierung von 2-trimethylsilyl-1-phenoxyethan. Nachweis des nicht-klassischen ethylen-trimethylsilanium-ions in der gasphase

The mass spectrometric investigation of specifically deuterium and ¹³C labelled 2-trimethylsilyl-l-phenoxyethanes proves that the dissociative ionization of β-silyl-substituted ethane derivatives (loss of PhO^?; p-CH₃C₆H₄O^?; and C₄H^?₉ from PhOCH₂CH₂SiMe₃, p-MeC₆H₄OCH₂CH₂SiMe₃ and CH₃CH₂CH(CH₃)CH₂-CH₂SiMe₃, respectively) yields the non-classical bridge ethylene trimethylsilanium ion and not the open-chain isomer. Other stable C₅H₁₃Si^+? ions, characterised by collisional activation mass spectrometry, are the dimethyl n-propyl silicenium ion and the l-trimethylsilyl ethyl cation, both generated from the molecular ions of CH₃CH₂CH₂Si(Cl)Me₂ and CH₃CH(Cl)SiMe₃ via unimolecular loss of Cl^?.     

Diorganomorpholinometallane von Gallium und Indium – Monomer‐Dimer‐Gleichgewichte in Lösung

Diorganomorpholinometalates of Gallium and Indium – Monomer‐Dimer‐Equilibrium in Solution The reaction of Li[N(CH₂CH₂)₂O] (LiMorpholinate; Li(Morph)) with Me₂GaCl and Me₂InCl gives by salt‐elimination the diorganoamidometalates Me₂M(Morph) ( M = Ga: 1 ; M = In: 2 ), respectively. 1 and 2 were characterized by NMR and vibrational spectroscopy as well as by X‐ray structure determinations. According to this, centrosymmetrical dimers are present in the solid state while a monomer‐dimer equilibrium was assumed for the THF‐solution. Cryoscopic molecular weight determinations confirmed our assumptions.