Some aspects of the living isobutylene polymerization

The possibilities of increasing the livingness in cationic isobutylene polymerizations has been investigated. It has been assumed that the living chain-end is polarized but non-dissociated and relatively stable, therefore, i) shifting of the dissociation equilibrium by adding salts with common or non-common anion in excess, and ii) increasing of the stability of the chain-end by complexing it with electrondonors, may increase the livingness of the system. Indeed, the addition of n-Bu₄NCl or n-Bu₄NI to systems with BCl₃ or TiCl₄ coinitiators, as well as the addition of dimethyl sulphoxide as electrondonor in a broad concentration range, improved the living character. The possibility of complexation of the chain-end by the monomer has also been supported     

Robotic preparation of metal samples for analysis by plasma emission spectrometry

Summary A method utilizing a laboratory robotic system to automate sample preparation for the chemical analysis of metals was developed. Anticipated elemental concentration values for samples are entered into the robotic system, and the system determines the needed sample weights and calibration solution concentrations. The robot then weighs, dissolves, and dilutes the samples and prepares calibration solutions prior to multi-elemental analyses by inductively-coupled plasma — atomic-emission spectrometry. Zinc-base alloy standard reference materials were used to evaluate this method. For a batch of ten samples, operator times compared with a similar manual method were reduced by about 5-fold. Precision and accuracy data for samples prepared by robotic and manual methods were equivalent.

---

Automatische Probenvorbereitung für die Analyse durch Plasma-Emissions-Spektrometrie mit Hilfe eines Laborroboters

     

A software package for the evaluation of Zeeman AAS data using a Perkin-Elmer model 3600 data station

The Perkin-Elmer Zeeman/5000 Atomic Absorption Spectrometer is only able to perform a calibration with three single standards or a one-point standard addition. The accuracy and precision of these methods are inappropriate in ETA-AAS, a computer-based data management is essential.A software package for calibration and evaluation was developed using curve fitting by linear regression based on a leastsquares fit when absorbances were transformed by the Baule-Mitscherlich function. The total analytical range could be covered by this method whether peak area or peak height values were fitted. The maximum absorbance levels could be calculated, as well.Absorbance signals were collected and stored by the HGA-graphics software (modified by Perkin-Elmer Nederland B. V.). The Pecowriter software was used for identifying data and file manipulations. The results of the calibration and evaluation can be stored on disk and/or printed. Calibration curves can be plotted on hardcopy output. The Limit of Detection and the Characteristic Mass can be calculated.The use of the CALIBRATION program is demonstrated by the calibration curves for the determination of Pb, Cd, As, Se, Cr, Al, Cu and Ni using mostly STPF-conditions. The performance of the method evaluated by the root mean square percent deviation of the fit is equal to the traditional curve-fitting function as well as to rational or quadratic functions.The use of the EVALUATION program is demonstrated by the results of the direct determination of lead in mineral waters.     

Nitrogen Bridgehead Compounds. Part 79. Synthesis and structure elucidation of benzimidazolo[2,1-f][1,6]naphthyridine aza-derivatives

6-Substituted 1,6-naphthyridine-5(6H)-ones were prepared from diethyl 2-[2-(dimethylamino)vinyl]-6-methylpyridine-3,5-dicarboxylate 1 [2] by ring closure with aromatic and heteroaromatic diamines (o-phenylenediamine, 2,3-diaminopyridine, 3,4-diaminopyridine and 4,5-diaminopyrimidine, respectively). 1,6-Naphthyridine-5(6H)-ones were cyclised in phosphoryl chloride to yield nitrogen bridgehead tetracycles 6-9 . The structure of the products was established by nOe difference spectroscopy. A complete ¹H and ¹³C nmr assignment was achieved by different 2D carbon-proton correlation measurements.     

Accuracy of film thickness determination in electron probe microanalysis

The thickness of copper films (100–450 nm) on silicon substrates was determined by electron probe microanalysis (EPMA) applying (z) procedures of Pouchou and Pichoir. Film thickness was calculated from experimental k-ratios analyzed with electron energies between 6 and 30 keV using commercial software (LAYERF distributed by CAMECA). The influence of the incident electron energy and X-ray line chosen for analysis on the results was investigated. Accuracy of film thickness determination was evaluated by comparison with Rutherford backscattering spectroscopy (RBS) and secondary ion mass spectrometry (SIMS). The difference between layer thicknesses determined with EPMA and RBS is in general less than 2%, if EPMA measurements are performed with various electron energies. Layer thicknesses determined with Cu-L are mostly closer to values obtained by RBS than those derived from Cu-K radiation. Preliminary SIMS measurements yielded inconsistent results and, thus, cannot be used in this case to determine the layer thickness of Cu films on Si accurately.     

Spectrophotometric study of the complexation and extraction of chromium(VI) with cyanine dyes

Solvent extraction of chromium(VI) ion associates with symmetric cyanine dyes including the heterocyclic radicals of 1,3,3-trimethyl-3N-indoline, benzooxazol, benzothiazol and quinoline has been studied by means of spectrophotometric method. In the acidic medium in the presence of chloride ions, extractable by aromatic hydrocarbons and esters of acetic acids, chromium(VI) ion associates are formed. The molar absorptivities of ion associates are 2.5-3.6x10(5) l mol(-1) cm(-1) in dependence on extractant and dye. The absorbance of the coloured extracts obeys the Beer's law in the range 0.01-2.1 mg l(-1). The extraction of chromium is the highest during extraction from the sulphuric acid medium in the range 0.05-03 M H(2)SO(4). It was found that the Cr(VI):Cl:R molar ratio is 1:1:1. A novel procedure of chromium(VI) extraction and spectrophotometric determination in various types of soils and sewage doped with chromium(VI) was examined.     

The highest water exchange rate ever measured for a Gd(III) chelate

The complex [Gd(L)(H2O)]3- (H(6)L =N,N'-bis(6-carboxy-2-pyridylmethyl)ethylenediamine-N,N'-methylenephosphonic acid) displays the highest water exchange rate ever measured for a Gd(III) chelate (k(298)(ex)= 8.8 x 10(8) s(-1)), which is attributed to the flexibility of the metal coordination environment.     

A Study on the Phosphorylation of Indole,Imidazole, Carbazole,and Phenothiazine Derivatives

Abstract

N-Heterocycles including indolecarbaldehyde, substituted benzimidazoles, and methylimidazole could be efficiently phosphorylated by diethyl chlorophosphate at room temperature in different solvents using alkali carbonate or triethylamine as the base. However, the phosphorylation of N-heterocycles with a lower reactivity at the NH function, such as carbazole and phenothiazine, could not be conducted to complete conversion under the conditions applied.