Magnetic,electrical transport and electron spin resonance studies of ferromagnetic insulating manganites Nd0.85Na0.15MnO3

We have investigated the magnetic, electrical transport and electron spin resonance (ESR) properties of polycrystalline Nd_0.85Na_0.15MnO₃ prepared by sol–gel method. A ferromagnetic–paramagnetic (FM–PM) transition is observed around 110 K, which is not accompanied by a metal–insulator transition. The sample displays the complete PM state associated with the ESR spectra fitted by single Lorentzian line shape above 130 K. Below 130 K, ESR spectra become distorted and then linewidth increases rapidly, where short-range magnetic order develops and coexists with PM phase due to the inhomogeneous magnetic state. In addition, the large difference between the activation energies obtained from the resistivity and ESR parameters (peak-to-peak linewidth and line intensity) at the frame of adiabatic small polaron hopping model is pointed out for Nd_0.85Na_0.15MnO₃.     

Positive solutions and eigenvalue regions of two-delay singular systems with a twin parameter

The paper is concerned with a two-delay singular differential system with a twin parameter. Applying fixed-point index theory, we show the relationship between the asymptotic behaviors of nonlinearities (at zero and infinity) and the open regions (eigenvalue regions) of parameters, which are correlated with delays, such that the system has zero, one and two positive solution(s).     

关于微分熵的一类强偏差定理

利用关于乘积分布密度的相对熵和相对熵率的概念,建立了相依连续型随机变量序列关于参考微分熵的一类强偏差定理,证明中给出了将Laplace变换应用于微分熵强偏差定理的研究的一种途径．     

轻型汽车后桥半轴断裂件的组织及断口特征

采用光学显微镜和扫描电子显微镜等手段，对某轻型汽车40Cr后桥半轴断裂件的组织及断口特征进行了分析结果表明：半轴在调质处理时的淬火温度不够高，使其表层和心部组织中存在较多的铁素体相，造成了工件最终的硬度和疲劳强度不足，导致半轴在使用中发生扭转疲劳断裂．     

A hybrid active noise controller for finite ducts

A hybrid active noise controller (ANC) is proposed to solve some existing problems, which are related to the non-minimum phase (NMP) path models between uncollocated sensors and actuators in many ANC systems. For hybrid ANC schemes, the NMP path causes design difficulties to both feedforward and feedback control. These problems can be solved effectively by adding an extra actuator in the ANC system. A new design procedure is presented to take the greatest advantage of the extra actuator. Theoretical analysis and experimental results are presented to show the improved performance of the proposed ANC.     

Fe/Si多层膜的层间耦合与界面扩散

对以本征Si及重掺杂ｐ型和ｎ型Si作为中间层的Fe/Si多层膜的层间耦合进行研究，并通过退火，增大Fe，Si之间的扩散，分析界面扩散对层间耦合的影响. 实验结果表明，层状结构良好的制备态的多层膜，Fe，Si之间也存在一定程度的扩散，它是影响层间耦合的 主要因素，远远超过了半导体意义上的重掺杂，使不同种类的Si作为中间层的层间耦合基本 一致.进一步还发现，在一定范围内增大Fe，Si之间的扩散，即使多层膜的层状结构已经有了相当的退化，Fe/Si多层膜的反铁磁耦合强度基本保持不变. 关键词： Fe/Si多层膜 层间耦合 界面扩散     

高功率固体激光放大系统相位自校正方法研究

就光学元件间低频相位误差叠加提出用相关系数作为叠加相位结果的估计参量，并通过模拟计算和验证实验证明了相关系数能有效地对低频相位叠加结果进行比较估计，在此基础上就高功率固体激光放大系统中放大片的选取和安装提出了自校正方法并实现了自校正过程。     

Detection of low caloric power of coal by pulse fast-thermal neutron analysis

This paper introduces the analysis method and principle of pulse fast-thermal neutron analysis (PFTNA). A system for the measurement of low caloric power of coal by PFTNA is also presented. The 14 MeV pulse neutron generator and BGO detector and 4096 MCA were applied in this system. A multiple linear regression method applied to the data solved the interferential problem of multiple elements. The error of low caloric power between chemical analysis and experiment was less than 0.4 MJ/kg. This revised version was published online in July 2006 with corrections to the Cover Date.     

The Characterisitic of Proton-Exchanged LiNbO3 Waveguide Formed by Different Proton Source

Benzoic acid as a source of proton is widely used in the technology of manufacture of proton exchanged ( PE) waveguide .But the diffusing speed of proton is too fast to make the waveguide stable in the pure benzoic acid. The characteristic of waveguide is improved with mixture of benzoic acid and lithium benzoate .     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.