3-甲基-4-对甲基苯基-5-(2-吡啶)-1,2,4-三唑桥联的双核铜配合物的磁性理论研究

采用对称性破损态方法结合密度泛函理论,选用反铁磁双核配合物[Cu2(MMBPT)2Cl4(H2O)2.5](MMBPT=3-甲基-4-对甲基苯基-5-(2-吡啶)-1,2,4-三唑)作为研究对象,通过与实验数据相比较,探讨了不同密度泛函方法与基组对计算铜配合物交换耦合常数的准确度.结果表明,4种混合密度泛函DFT(B3LYP,B3P86,B3PW91和PBE0)的计算结果都能和实验所观察到的值-31cm-1符号一致,但只有B3PW91方法得到的结果和实验结果吻合程度最好,同时采用方法B3PW91方法计算所得的交换耦合常数Jab对基组的依赖性较大.研究表明,2个Cu(Ⅱ)离子之间弱的反铁磁相互作用主要源于单占据分子轨道SOMOs小的能量劈裂.     

Superconvergence of a two‐grid method for fourth‐order dispersive‐dissipative wave equations

In this paper, the superconvergence analysis of a two‐grid method (TGM) with low‐order finite elements is presented for the fourth‐order dispersive‐dissipative wave equations for a second order fully discrete scheme. The superclose estimates in the H¹‐norm on the two grids are obtained by the combination technique of the interpolation and Ritz projection. Then, with the help of the interpolated postprocessing technique, the global superconvergence properties are deduced. Finally, numerical results are provided to show the performance of the proposed TGM for conforming bilinear element and nonconforming element, respectively. It shows that the TGM is an effective method to the problem considered of our paper compared with the traditional Galerkin finite element method (FEM).     

�͹��ʵ绡�ŵ縨������ȼ�յ�ʵ���о�

Different ratios of methane/air in the low power arc discharges assisted methane combustion were studied at atmospheric pressure. Plasma emission spectroscopy was recorded by an optical emission spectrometer. The possible physical and chemical reaction process and mechanisms were discussed. With a plasma in the on or off state, the physical appearances of the methane combustion flame were observed and compared, the temperature of the flame in the main combustion zone was investigated. The gas compositions of CH₄, CO and O₂ were analyzed by the gas chromatography and flue gas analyzer. The results showed that when plasma was in the on state, the temperature of flame increased and the combustion efficiency enhanced in stable combustion due to decrease of CH₄, CO and O₂; the combustion enhancement was more obvious at low ratio of methane/air; the rich combustion limits in terms of the ratio of methane/air was extended from 16% to 21%.     

A conjugated alkyne functional bicyclic polybenzoxazine with superior heat resistance

A difunctional benzoxazine (coPh‐apa) with a conjugated alkyne group is synthesized by the oxidative coupling reaction from a monocycle‐benzoxazine (Ph‐apa) containing an alkyne group. A model compound, 1,4‐diphenylbutadiyne (coPa), is used to study the curing reaction process of coPh‐apa by DSC, Fourier transform infrared spectroscopy, and ¹³C NMR, and the results suggest that the conjugated alkyne groups are involved in the crosslinking reaction via the trimerization reaction of the conjugated alkynyl groups and the Diels–Alder reaction. Furthermore, thermal properties of the polybenzoxazine are studied by dynamic thermomechanical analysis and thermogravimetric analysis. A glass‐transition temperature (T_gs) of as high as 412 °C and a char yield of 75.6% at 800 °C under nitrogen are obtained with the aid of the conjugated alkyne groups. Its excellent heat resistance dominates most thermosetting resins and will serve for heat shields. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1587–1592     

Nucleophilic substitution of ferrocenyl alcohols catalyzed by bismuth(III) in aqueous medium at room temperature

A nucleophilic substitution reaction of an α‐ferrocenyl alcohol with various amines, indoles and thiols was successfully developed by using a catalytic amount of Bi(NO₃)₃.5H₂O at room temperature without the aid of phase transfer catalyst. The reactions proceeded in aqueous media, leading to the formation of new C=C, C=N and C=S bonds bearing ferrocenyl substituent with high efficiency. Copyright © 2012 John Wiley & Sons, Ltd.     

基于B样条的TERS形貌成像背景扣除方法

在针尖增强拉曼光谱(TERS)形貌成像过程中，由于针尖与扫描台无法绝对平行、样品电子密度骤变处针尖快速升降以及扫描控制系统响应时间特性差等综合原因的影响，往往使形貌图中带有倾斜或边界面卷曲的成像背景。成像背景对样品形貌的识别和分析带来十分不利的影响，而背景扣除就是解决该问题的重要手段，也是形貌成像预处理的重要组成部分。背景扣除的原理一般是通过拟合背景的方法来扣除成像中的背景。传统的背景扣除方法是利用多项式拟合的方法对成像进行逐行的基线校正，但是该方法在处理形貌成像时常常会由于过拟合而造成样品形貌的失真，同时容易在图片上留下明显的线条纹理。针对传统方法的缺点，本文提出采用B样条曲面拟合方法，直接对样品形貌图进行曲面背景拟合，发挥B样条低阶光滑的优点，能够有效克服传统方法的缺陷。在实验中，同时利用传统方法和该方法对金单晶和合成金片的形貌图进行背景扣除，实验结果表明，两种方法都能够扣除样品形貌图中的成像背景，但与传统方法相比，所提出的方法不会造成样品形貌的失真，且不会留下线条纹理，获得了更加良好的背景扣除效果，为进一步分析样品形貌特征提供了更准确可靠的信息，是一种更加有效的TERS形貌成像背景扣除算法。     

鲍曼不动杆菌LpxC的同源模建及分子对接

鲍曼不动杆菌已成为最普遍的医院致病菌,且耐药情况严峻.LpxC作为新抗菌药物靶点被大量研究,但鲍曼不动杆菌LpxC晶体尚未解析得到,基于其结构的药物设计等工作无法开展.以铜绿假单胞菌LpxC晶体结构为模板,通过同源模建方法获得鲍曼不动杆菌LpxC结构模型.较好的Ramachandran plot分布和Profile-3D结果验证了模型的合理性.用分子动力学模拟优化鲍曼不动杆菌LpxC模型,修补部分不合理构象.后续分子对接结果显示S构型的苄氧乙酰基羟肟酸类抑制剂比R构型分子能更有效地结合在F191,H237和K238组成的较浅口袋中,这可能是S构型抑制剂活性更高的主要因素,模拟结果与实验数据吻合较好.     

Combined prostate diffusion tensor imaging and dynamic contrast enhanced MRI at 3T — quantitative correlation with biopsy

The purpose of this work was to compare diagnostic accuracy of Diffusion Tensor Imaging (DTI), dynamic contrast-enhanced magnetic resonance imaging (DCE MRI) and their combination in diagnosing prostate cancer. Twenty-five patients with clinical suspicion of prostate cancer underwent MRI, prior to transrectal ultrasound-guided biopsies. MRI data were correlated to biopsy results. Logistic regression models were constructed for the DTI parameters, DCE MRI parameters, and their combination. The areas under the receiver operator characteristic curves (AUC) were compared between the models. The nonparametric Wilcoxon signed rank test was used for statistical analysis. The sensitivity and specificity values were respectively 81% (74–87%) and 85% (79–90%) for DTI and 63% (55–70%) and 90% (85–94%) for DCE. The combination “DTI or DCE MRI” had 100% (97–100%) sensitivity and 77% (69–83%) specificity, while “DTI and DCE MRI” had 44% (37–52%) sensitivity and 98% (94–100%) specificity. The AUC for DTI+DCE parameters was significantly higher than that for either DTI (0.96 vs. 0.92, P=.0143) or DCE MRI parameters (0.96 vs. 0.87, P=.00187) alone. In conclusion, the combination of DTI and DCE MRI has significantly better accuracy in prostate cancer diagnosis than either technique alone.     

Ultra-lightweight cellulose foam material: preparation and properties

Ultra-lightweight cellulose foams were prepared by regeneration of sodium dodecyl sulfate (SDS)/cellulose/NaOH/urea blend solution via mechanical agitation and then freeze-drying. The morphology and properties of the blend solutions and foams were investigated via optical microscope, rheometer, BET and SEM. As a result, it was found that the inclusion complex structure between cellulose macromolecules and the solvent molecules was not destroyed. Moreover, the bubbles were about 20–50 μm in the solutions and larger (>100 μm) in the foams. Not only the micropores (bubbles) but also the nanopores could be observed in the wet and dried foams. The cellulose foams possessed ultra-low density of about 30 mg/cm³ and high specific surface area. The result of X-ray diffraction and Fourier transform infrared spectroscopy indicated that the cellulose foams were transited from cellulose I to cellulose II after dissolution and gelation. Bubbles inside the wet foams weakened the mechanical properties, but inversely increased the mechanical properties in the dried foams. Typical “J”-shaped curves were observed during the mechanical test, which revealed good compressive strength of dried foams. In this work, cellulose foams with ultra-lightweight and good mechanical properties were obtained, which exhibited great potentials for further development and comprehensive utilization of cellulose.