Effect of α‐cyclodextrin on the crystallization of poly (3‐hydroxybutyrate)

The effect of α‐cyclodextrin (α‐CD) on the crystallization behavior of poly(3‐hydroxybutyrate) (PHB) was investigated with polarized optical microscopy, differential scanning calorimetry, and wide‐angle X‐ray diffraction. We found that the addition of α‐CD can greatly accelerate the crystallization of PHB and that α‐CD has a potential not only to enhance the nucleation but also to accelerate the crystallization of PHB. Compared to a conventional nucleation agent, such as talc, α‐CD is a natural product and has many advantages because it is environmentally friendly and safe to humans. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3461–3469, 2004     

A new method for atmospheric nitrogen dioxide measurements using the combination of a stripping coil and fluorescence detection.

A new stripping coil for the collection of nitrogen dioxide (NO2) has been developed to increase its versatility and efficiency. Nitrogen dioxide measurements based on quantitative collection through a reaction coil into an alkaline solution has been examined. Nitrogen dioxide is collected in a 0.1 N NaOH solution. This collection system has an efficiency of nearly 100%. The absorbed nitrogen dioxide has been measured by fluorescence detection with sub-ppbv detection limits. The excitation wavelength at 360 nm and the produced emission wavelength at 405 nm were suitable for nitrite ion measurements.     

Design and synthesis of labeling reagents (MS probes) for highly sensitive electrospray ionization mass spectrometry and their application to the detection of carbonyl, alcohol, carboxylic acid and primary amine samples.

Novel labeling reagents, called MS probes, which possess a positively charged quaternary amine moiety and can transform a neutral analyte into a charged compound by simply mixing with the analyte and allowing the mixture to stand from several minutes to 30 min at room temperature or while heating to 50 degrees C, were designed and synthesized for the highly sensitive detection of carbonyl, alcohol, carboxylic acid and primary amine samples by electrospray ionization mass spectrometry (ESI-MS). The positively charged products can be detected with high sensitivity in an ESI-MS system, which is the most popular liquid MS instrument. All of the labeled products showed a remarkably large increase in the molecular-ion peak abundance detection sensitivity of over 500-fold at picomolar concentration levels compared to that of unlabeled analytes in an ESI-MS system. These MS probes, used together with liquid MS detection, are widely applicable as a convenient method for the highly sensitive detection of less than picomolar levels of analytes, and therefore greatly enhance the power of ESI-MS analysis.     

Electroneutrality coupling of electron transfer at an electrode surface and ion transfer across the interface between thin-layer of 1-octyl-3-methylimidazolium bis(perfluoroalkylsulfonyl)imide covering the electrode surface and an outer electrolyte solution.

The electrode reaction of decamethylferrocene (DMFc) dissolved in a thin layer of a room-temperature molten salt (RTMS), 1-octyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (C8mimC1C1N) or 1-octyl-3-methylimidazolium bis(pentafluoroethylsulfonyl)imide (C8mimC2C2N), on a self-assembled monolayer-modified gold electrode is coupled with the ion transfer across the interface between the RTMS and the outer aqueous solution (W) to give a voltammogram whose shape resembles a voltammogram of a simple one-electron transfer process. The electroneutrality of the RTMS layer during the oxidation of DMFc to decamethylferricenium ion is maintained by the concomitant dissolution of C8mim+ ion from the RTMS phase to the W phase, and the reduction of decamethylferricenium ion to DMFc is accompanied by the transfer of either C1C1N- or C2C2N- from RTMS to W. The midpoint potential of the voltammogram varies with the concentration of the salt in the aqueous phase, C8mimCl or LiCnCnN (n = 1 or 2), in a Nernstian manner, showing that the phase-boundary potential between the RTMS and the W is controlled by the partition of these ions. Although the phase-boundary potential across the RTMS / W interface is Nernstian with respect to the ions common to both phases at the equilibrium, the polarization at the RTMS / W interface under current flow distorts the shape of the voltammograms, resulting in a wider peak separation in the voltammogram.     

Interfacial adsorption state of protonated lipophilic porphyrins in a liquid-liquid system by using reflection spectrometry.

Analysis by reflection spectrometry was performed to clarify the interfacial adsorption of protonated lipophilic tetraphenylporphyrin derivatives in a dodecane-aqueous sulfuric acid system, and to confirm the utility of partial reflection spectroscopy. Interfacial adsorption was not observed for porphyrins substituted at the 2,6 positions of meso-phenyl groups, suggesting that the substituents prevent porphyrins from forming aggregates by steric hindrance. Polymorphous J-aggregates of acid dications were produced by tetra-p-tolylporphyrin with a saturated interfacial molecular density of 1.0 x 10(-10) mol cm(-2), which could yield 48 degrees as a mean tilting angle of the pyrrole ring plane from the interface normal. Partial-reflection spectrometry can provide sensitive detection and molecular orientation analysis of interfacial adsorbates.     

Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

TTF-porphyrin dyads as novel photoinduced electron transfer systems

A TTF-linked porphyrin dyad and its zinc complex have been synthesized as novel photosystems with a redox-active pendant. The two chromophores of these dyads are not interactive in the absorption spectra, but the fluorescence of the porphyrin chromophore is dramatically quenched by intramolecular electron transfer from the TTF pendant.     

Phase Conjugation in Saturable Absorbing Dye Films by Degenerate Four-Wave Mixing and Holographic Processes Using Nanosecond Pulse and CW Lasers

We report on the simultaneous generation of phase-conjugate signals by degenerate four-wave mixing (DFWM) and holographic processes using a nanosecond pulse and a CW lasers in polyvinyl alcohol (PVA) films doped with four kinds of saturable absorbing dyes. For the pulse laser, of the four kinds of dye-doped PVA films, the erythrosine B-doped PVA and uranine doped-PVA films generate PC signals only by the DFWM process, while the other dye-doped PVA films generate PC signals simultaneously by not only the DFWM process but also the holographic process. Especially, the safranin T-doped PVA film generates strong PC signals by the holographic process. In contrast, all of the dye-doped PVA films generate the two types of PC signals for the CW laser. The fading of dye molecules is found to result in the generation of the holographic component of PC signals which governs the temporal behavior of the total PC signals.     

Cellulose dimethylphenylcarbamate-bonded carbon-clad zirconia for chiral separation in high performance liquid chromatography.

Porous zirconia particles are very robust material and have received considerable attention as a stationary phase support for HPLC. We prepared cellulose dimethylphenylcarbamate-bonded carbon-clad zirconia (CDMPCCZ) as a chiral stationary phase (CSP) for separation of enantiomers of a set of 14 racemic compounds in normal phase (NP) and reversed-phase (RP) liquid chromatography. Retention and enantioselectivity on CDMPCCZ were compared to those on CDMPC-coated zirconia (CDMPCZ) to see how the change in immobilization method of the chiral selector affects the retention and chiral selectivity. In NPLC, retention was longer and the number of resolved racemates was smaller on CDMPCCZ than on CDMPCZ. However, chiral selectivity factors for some resolved racemates were better on CDMPCCZ than on CDMPCZ. The longer retention on CDMPCCZ is likely due to strong, non-chiral discriminating interactions with the carbon layer on CDMPCZ. In RPLC only two racemates were resolved on CDMPCCZ, but retention times were shorter than, and resolutions were comparable to, those in NPLC, indicating a potential for improving chromatographic performance of the CDMPCCZ column in RPLC with optimized column preparation and separation conditions.     

Transfructosylation of rebaudioside A (a sweet glycoside of Stevia leaves) with Microbacterium beta-fructofuranosidase.

It was found that a beta-fructofuranosidase produced by Microbacterium sp. H-1 has potent trans-beta-fructofuranosylation activity from sucrose (donor). By means of this enzyme system, rebaudioside A (RA), the second major sweet steviol glycoside of the leaves of Stevia rebaudiana, was subjected to transfructosylation, affording a mono-beta-fructofuranosylated product (RA-F) in a high yield. The structure of RA-F was elucidated as beta-D-fructofuranosyl-(2----6)-beta-D-glucopyranosyl ester of steviol-13-O-[beta-D-glucopyranosyl-(1----2)]- [beta-D-glucopyranosyl-(1----3)]-beta-D-glucopyranoside. Some improvement in the quality of sweetness was observed for RA-F.