Montmorillonite-based ceramic membranes as novel lithium-ion battery separators

Novel montmorillonite-based ceramic membrane (CM) has been prepared with poly(vinylidene fluoride-co-hexafluoropropene) (PVdF-HFP) copolymer as binder. Physical properties such as surface morphology, porosity, liquid electrolyte uptake and thermal stability were analysed. The ceramic membrane was activated by soaking it in a non-aqueous liquid electrolyte (1.0 M LiPF₆ solution in 1/1 v/v ethylene carbonate/diethyl carbonate mixture) for 10 min. The compatibility of the membrane with lithium metal anode as a function of storage time was analysed by assembling a Li/CM/Li symmetric cell. Finally, a lab-scale cell composed of Li/CM/LiFePO₄ is assembled and its cycling performance analysed at different C-rates. Although the ceramic membrane is not flexible, it shows high thermal stability and stable interfacial properties when in contact with the lithium metal anode. A stable cycling behaviour is demonstrated even at 1C-rate with limited fade in capacity.     

An efficient copper-aluminum hydrotalcite catalyst for asymmetric hydrosilylation of ketones at room temperature

A catalyst system consisting of a copper-aluminum hydrotalcite-chiral diphosphine ligand effects asymmetric hydrosilylation of several ketones, using polymethylhydrosiloxane (PMHS) as the stoichiometric reducing agent at room temperature, with moderate-to-excellent enantioselectivities. The catalyst is recovered by simple centrifugation, and the efficiency of the catalyst remains almost unaltered even after several cycles.     

Lewis acid promoted imino Diels-Alder reactions of 5-dienyl pyrimidinones with N-aryl/naphthyl imines: synthesis of novel quinoline/benzoquinoline derivatives

The chemo- as well as regioselective imino Diels-Alder reactions of 5-dienyl pyrimidinones with N-aryl as well as N-naphthyl imines in the presence of a different Lewis acid catalysts resulting in novel quinoline and benzoquinoline derivatives are reported.     

Role of Cu-doping in CdTe thin films: Experiments and simulations

Due to its outstanding physical properties, CdTe is used to fabricate high efficiency solar cells. However, its high work function poses a challenge, and hence, to fabricate an efficient CdTe-based solar cell, Cu-doping may be useful. Here, we present the role of temperature-dependent Cu-doping in radio frequency sputter-deposited CdTe films and the related changes occurring in their optical, electrical, structural and microstructural properties. For instance, Cu-doping at different temperatures leads to an increase in the grain size and a reduction in the optical reflectance with increasing temperature. In addition, Kelvin probe force microscopy measurements reveal that the work function is found to be smaller corresponding to the annealing temperature of 473 K, whereas resistivity measurements show that it decreases with increasing temperature (the lowest value of resistivity is found to be 1.8 × 10⁻² Ω-cm). To understand the electronic structure of CdTe before and after Cu-doping, we have carried out first-principles density functional theory (DFT) simulation, which reveals a strong hybridization among Cu, Cd and Te atoms. This study paves the way to fabricate efficient Cu-doped CdTe-based solar cells.     

Fragmentation patterns of newly isolated cassane butenolide diterpenes and differentiation of stereoisomer by tandem mass spectrometry

Different stereoisomers of active molecules often cause different physiological responses and hence pose a challenge for their identification. This study involves perceptive fragmentation behavior of newly isolated cassane butenolides, caesalpinolide A [1] and caesalpinolide B [2] (epimeric at the hemiketal position) by tandem MS. The electrospray ionization-mass spectrometry (ESI-MS)/collision-induced dissociation (CID; ESI-MS(2) and ESI-IT-MS(n)) were investigated. The effect of orientations of hemiketal hydroxyl at C-12 was clearly observed in the mass spectrum. Tandem mass spectra of 1, 1(A) or 2, 2(A) show stereospecific fragmentation resulting in significant abundance dissimilarity of [MH - H(2)O](+) as well as differences in fragmentation pathway. Both of these pathways seem to be influenced by the stereochemistry of the molecule. The differentiation can be clearly visualized from the [M + H - H(2)O](+)/[M + H](+) ratio of the two isomers where beta-isomer 2 was found to be five times higher than that of alpha-isomer 1 in full scan liquid chromatography-electrospray ionization mass spectrometry(LC-ESI-MS). In high-energy CID, the mass fingerprint of 1, 2, 1(A), and 2(A) was found to be different from one another.     

Steady State and Time Resolved Spectroscopic Study of CdSe and CdSe/ZnS QDs:FRET Approach

This article highlights some physical studies on the relaxation dynamics and Förster resonance energy transfer (FRET) of semiconductor quantum dots (QDs) to proximal dye molecule and the way these phenomena change with core to core-shell QD is discussed. Efforts to understand the optical and carrier relaxation dynamics of CdSe and CdSe/ZnS QDs are made by using absorption, steady-state fluorescence and time-resolved fluorescence (TCSPC) techniques. Steady-state as well as time-resolved fluorescence measurements were employed to evaluate the QD PL quenching induced by the proximal Rhodamine 101 dye molecule and to examine the influence of deep trap states on energy transfer efficiency. The FRET parameters such as spectral overlap, Förster distance, intermolecular distance for each donor-acceptor pair are determined and variation of these parameters from core to core-shell QD is discussed.     

Production of Raw Starch-Saccharifying Thermostable and Neutral Glucoamylase by the Thermophilic Mold <Emphasis Type="Italic">Thermomucor indicae-seudaticae</Emphasis> in Submerged Fermentation

Among physical and nutritional parameters optimized by “one variable at a time” approach, four cultural variables (sucrose, MgSO₄ ^.7H₂O, inoculum size, and incubation period) significantly affected glucoamylase production. These variables were, therefore, selected for optimization using response surface methodology. The p-values of the coefficients for linear effect of sucrose and inoculum size were less than 0.0001, suggesting them to be the key experimental variables in glucoamylase production. The enzyme production (34 U/ml) attained under optimized conditions (sucrose, 2%; MgSO₄ ^.7H₂O, 0.13%; yeast extract, 0.1%; inoculum size, 5 × 10⁶ spores per 50 ml production medium; incubation time, 48 h; temperature, 40°C; and pH 7.0) was comparable with the value predicted by polynomial model (34.2 U/ml). An over all 3.1-fold higher enzyme titers were attained due to response surface optimization. The experimental model was validated by carrying out glucoamylase production in shake flasks of increasing capacity (0.25–2.0 l) and 22-l laboratory bioreactors (stirred tank and airlift), where the enzyme production was sustainable. Furthermore, the fermentation time was reduced from 48 h in shake flasks to 32 h in bioreactors.     

A photodimerization approach to crosslink and functionalize microgels

Microgels were prepared within reverse micelles via photocrosslinking. Gelation resulted from the [2 + 2] photodimerization reaction of nitrocinnamoyl (NC) groups on multi-arm polyethylene glycol (PEG) or gelatin. Because of the potential for biomedical and chemical applications, immobilization capacity within the microgels was investigated. Quantum dots (QDs), for example, share a similar size scale with proteins and can be physically trapped within the microgels. In addition, the optoelectronic properties of QDs could be utilized for analytical, imaging, and therapeutic purposes. Small molecules and recognition sequences (e.g. biotin) can also be covalently immobilized within the microgel networks through the photodimerization reaction. In the presence of biotin-PEG-NC, the resulting microgels added to streptavidin-coated plates. The microgel properties such as biodegradability and degree of swelling may be engineered for particular applications including targeted monitoring and controlled drug delivery systems.