Synthesis of aromatic polyamides by 1-hydroxybenzotriazole-catalyzed polycondensation of active aromatic diesters with aromatic diamines

Catalytic actions of various additives were studied in the polycondensation of di(4-nitrophenyl) isophthalate with bis(4-aminophenyl) ether in N-methyl-2-pyrrolidone, and 1-hydroxybenzotriazole (HOBt) was found to be a highly effective catalyst that yielded high-molecular-weight polyamide. In addition to the polycondensation of the 4-nitrophenyl ester, the polymerization of negatively substituted phenyl esters like di(2,4,5-trichlorophenyl) isophthalate was also accelerated by HOBt. For the HOBt-catalyzed aminolysis of esters a bifunctional concerted mechanism that involves an eight-membered transition state was proposed.     

Determination of sulfate in river water by flow injection analysis

Sulfate ion in river water is determined by flow injection analysis at a rate of 30 samples per hour; the sulfate contents are typically less than 30 ppm. The reagent solution contains dimethylsulfonazo-III, barium chloride, potassium nitrate and chloroacetate buffer in 70% ($\text{v}\text{v}$) ethanol, and is saturated with barium sulfate. The aqueous carrier stream is also saturated with barium sulfate. The sample is filtered and treated with Amberlite IR120-B cation-exchanger before injection into the carrier stream, and the decoloration of the barium—dimethylsulfonazo-III complex by sulfate is measured at 662 nm. The calibration graph is linear over the range 0–30 μg ml^-1 for sulfate in water.     

New formation of a 1,3-dipole in the reaction of adamantanone azine with triazolinediones: In connection with reactivity toward singlet oxygen

Tricyclo[3.3.1.1]decanone azine ( adamantanone azine ) reacts with 4-substituted 1,2,4-triazoline-3,5-diones under elimination of diazo adamantane to give a 1,3-dipole ( “azomethinimine” ), which on treatment with dipolahophiles affords the [ 2 + 3] -cycloadducts. The reaction is compared with singlet oxygen oxidation.     

Synthesis of poly(benzoxazole)s by direct polycondensation of dicarboxylic acids with 3,3′-dihydroxybenzidine dihydrochloride using phosphorus pentoxide/methanesulfonic acid as condensing agent and solvent

A convenient method for the synthesis of poly(benzoxazole)s of high molecular weights has been developed. These polymers were prepared readily by direct polycondensation of aromatic dicarboxylic acids containing phenyl either structure with 3,3′-dihydroxybenzidine dihydrochloride using phosphorus pentoxide/methanesulfonic acid (PPMA) as condensing agent and solvent. Polycondensations proceeded fast and was completed within 5 h at 140°C and produced poly(benzoxazole)s with inherent viscosities up to 4.6 dL/g. Model compound work was performed in detail to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(benzoxazole)s showed 10% weight loss in air and nitrogen at 450–505°C and 465–535°C, respectively.     

Small angle X-ray scattering study of an extremely elongated micelle system of CTAB-p-toluidine solution

Whenp-toluidine is added to an aqueous solution of CTAB, a remarkable increase of viscosity is accompanied by a spectacular elasticity. We detected the existence of extremely elongated rod-like micelles in electron micrographs. SAXS measurements indicate a closely packed array of cylindrical rod-like micelles, brought about when solutions flow through a thin capillary. A scattering maximum ofd=160 Å almost corresponds to the distance between the nearest neighbours of the cylindrical rod-like micelles. This value agrees with the diameter measured on electron micrographs. The second broad peak (d=75 Å) is assigned to a subsidiary maximum of the shape function of the cylinder with infinite length.     

Cyclopalladation of the indole ring in palladium(II) complexes of 2N1O-donor ligands and its dependence on the O-donor properties

Synthetic, structural, spectroscopic, and kinetic studies have been carried out on the Pd(II) complexes of new 2N1O-donor ligands containing a pendent indole, 3-(N-2-pyridylmethyl-N-2-hydroxy-5-methoxybenzylamino)ethylindole (HMeO-iepp), 3-(N-2-pyridylmethyl-N-2-hydroxy-5-nitrobenzylamino)ethylindole (HNO2-iepp), and (N-2-pyridylmethyl-3-indolylethylamino)acetic acid (Hiepc) (H denotes a dissociable proton). [Pd(MeO-iepp)Cl] (2), [Pd(NO2-iepp)Cl] (3), and [Pd(iepc)Cl] (4) were prepared and revealed by X-ray analysis to have a pyridine nitrogen, an amine nitrogen, a phenolate or carboxylate oxygen, and a chloride ion in the coordination plane. UV absorption and 1H NMR spectral changes indicated that all the complexes could be converted to the indole-binding complexes where the O donor was replaced by the indole C2 atom by cyclopalladation in DMSO or DMF in the temperature range of 40-60 degrees C. Formation of the indole-binding complex species obeyed the first-order kinetics, from which the activation parameters were estimated. The formation rate was dependent on the properties of the O-donor group, a lower pKa value of its conjugate acid causing faster conversion to the indole-binding species in the order 2 (methoxyphenolate) < 3 (nitrophenolate) < 4 (carboxylate). On the other hand, the ratio of the indole-binding complex to the O-donor complex as a result of the conversion was greater for the complexes with a higher pKa value of the ligand OH group, the order being 2 > 3 > 4.     

Synthesis of disubstituted cucurbit[6]uril and its rotaxane derivative

Synthesis of diphenyl cucurbit[6]uril (CB[6]) has been achieved via co-oligomerization of diphenyl glycoluril and unsubstituted glycoluril. The unsymmetrically substituted CB[6], Ph(2)CB[6], was further converted to a rotaxane incorporating bis(dinitrophenyl)spermine. [reaction: see text]     

Absolute stereochemistry of amphidinolides G and H

[structure: see text] Absolute stereochemistry of amphidinolides G (1) and H (2), potent cytotoxic 27- and 26-membered macrolides, respectively, isolated from a marine dinoflagellate Amphidinium sp., was determined by X-ray diffraction analysis, synthesis of a degradation product (3) of 2, and interconversion between 1 and 2.     

Cyclopolymerization of diallylamine derivatives in dimethyl sulfoxide

Diallyl quaternary ammonium chlorides, bromides and N-alkyldiallylamine hydrochlorides were polymerized with ammonium persulfate (APS) in dimethyl sulfoxide (DMSO). The dependences of yield and molecular weight of polymers on polymerization conditions were examined and quaternary ammonium chlorides were found to have better polymerizability than bromides. The poly(diallyl quaternary ammonium chlorides) obtained with APS—DMSO system are expected to have quite high molecular weights, as determined from the measurement of limiting viscosity numbers of the polymers in NaCl aqueous solution.     

Scale-up of high shear granulation based on the internal stress measurement

Scale-up of wet granulation in a vertical high shear mixer was conducted. Pharmaceutical excipient powders composed of lactose, cornstarch and micro-crystallinecellulose, and hydroxypropylcellulose as a binder were mixed together and then granulated with purified water under various operating conditions and vessel scales. A novel internal stress measurement system was developed and stress of normal and tangential directions that granules received from the agitator blade during the granulation was continuously measured. The results indicated that granules received stress mainly from the tangential direction, which also showed the largest value near at the vessel wall. The effects of the agitator tip speed and the centrifugal acceleration on the measured stress was investigated. It was found that the tip speed of the agitator blade could be the main factor for the granule growth. The physical properties such as strength, size distribution and compressibility of granules prepared by changing the operating conditions and the vessel scales were evaluated and the scale-up characteristics of high shear granulation were investigated experimentally. The results showed that these physical properties had linear correlations with the tip speed. It was finally concluded that the scale-up of high shear granulation could be well conducted by means of the tip speed of the agitator blade.