Effect of titanium dioxide on photostability of solid-state mequitazine

TiO(2) has been widely used in pharmaceutical products, and it also has been used as a photocatalyst. In this study, the influence of photocatalytic activity on the stability of solid-state mequitazine, an H(1)-blocker, was investigated. The photo-degradation of mequitazine with TiO(2) occurred under irradiation with both light sources. The degree of degradation of mequitazine with anatase was higher than that of rutile. The degradation was significantly enhanced with increasing relative humidity. The relationship between the apparent degradation rate constant and water vapor pressure could be clearly described by a simple power law. The major photo-degradation products of mequitazine, resulting from photocatalytic activity of TiO(2), were mequitazine-S-oxide and mequitazine-sulphone. A remarkable degradation of mequitadine occurred with addition of TiO(2), and its photocatalytic activity was controlled by water vapor pressure. The photo-degradation of mequitazine with TiO(2) is a different process from mequitazine without TiO(2), because mequitazine-S-oxide and mequitazine-sulphone are not formed with normal photo-degradation of mequitazine.     

Simple calculations of Franck-Condon factors for electronic transition bands of polyacenes

Progressional intensities have been calculated for the L_a and L_b transitions of the polyacenes, on the basis of semi-empirical SCF CI calculations of geometry changes upon electronic excitation and from normal analyses. The results give the Franck-Condon intensity distributions over various totally symmetric modes in good agreement with the vibrational structures observed in high resolution spectra.     

The S2 emission characteristics of several organic sulfur compounds obtained by molecular emission cavity analysis and pyrolysis

Emission profiles of several organic sulfur compounds are investigated by modified molecular emission cavity analysis (MECA). Thiourea, 1,3-diethylthiourea, S-methyl- cysteine and taurine are pyrolyzed in a hydrogen stream and the pyrolytic products are determined by gas chromatography. The S₂ emission mechanism is discussed on the basis of emission profiles and the composition of the pyrolytic products. Although some compounds give multipeaked responses, the splitting disappears when a worn surface cavity is used or oxalic acid is added to the sulfur compound in the cavity. When the emission profile from thiourea is compared with that from 1,3-diethylthiourea, it is clear that the multipeaked response is due to quenching by degradation products of the latter compound. The main product of pyrolysis is hydrogen sulfide. The emission intensity is related to the yield of hydrogen sulfide in pyrolysis. As methylmercaptan was not detected in the pyrolysis products, it is suggested that the quenching by the organic fragments results from their hydrogen consumption rather than their reaction with sulfur species. The S₂ emission from sulfur-containing compounds is rapidly complete in the presence of oxalic acid, and it is suggested that such compounds are subject to reductive breakdown in the cavity.     

Novel Host Compounds, 1,1′-Binaphthyl-2,2′-Dihydroxy-5,5′- and 6,6′-Dicarboxylic Acid, which Trap Guest Molecules Tightly in their Inclusion Crystals

The host compounds 1,1’-binaphthyl-2,2′-dihydroxy-5,5′-dicarboxylic acid (1) and 1,1′-binaphthyl-2,2′-dihydroxy-6,6′-dicarboxylic acid (2) have been synthesized, and their inclusion properties have been studied. Inclusion complexes formed by 1 and 2 with volatile guests such as acetone and methanol release the guests only at much higher temperatures than their boiling points. The crystal structures of the inclusion complexes have been determined from single crystal X-ray diffraction data and show different host lattices.     

Voltammetry at partially covered electrodes: Part I. Chronopotentiometry and chronoamperometry at model electrodes

Equations for chronopotentiometry and chronoamperometry at partially covered electrodes have been derived using a model of hexagonal array of cylidrical spaces terminated, at the electrode surface, by concentric active and inactive regions. The boundary value problem was shown to be analogous to that for a charge transfer preceded by a chemical reaction. Experiments with the reduction of ferricyanide on gold model electrodes partially covered with photoresist layer showed excellent agreement with the theory. Application of the equations to estimation of coverage and size of active sites distributed on a electrode surface is discussed.     

The counterion releasing effect and the partition coefficient of branched alkanols in ionic micellar solution

In the micellar solution of SDS, the partition coefficient (K_x) of following branched alkanols at infinite dilution was determined by applying a differential conductivity method: the alkanols used were i-C_mH_2m+1OH (m=4-9, i=1-5) in which the position of OH group (i) shifts from an end to the center of a hydrocarbon chain. The method provides two significant quantities, d!/dX_am and dC_sf/dC_af in addition to K_x. The following results have been obtained. (1) The dependence of K_x on i indicates that the hydrophobicity of alkanol is weakened with increasing i, whereas the increase in m strengthens the hydrophobicity. (2) The degree of counterion disossiation of micelles (!) is accelerated by the solubilized alkanols in micelles (mole fraction: X_am) and the acceleration rate, d!/dX_am (=0.17), depends on neither m nor i. (3) In the bulk water, the monomerically dissolved alkanols (concentration: C_af) depresses the concentration of free monomer surfactant (C_sf), and the depressing rate, dC_sf/dC_af, in micellar solution is identical with the corresponding quantity, ((CMC/(C_a)_o at CMC.     

Theory of raman scattering from molecules. Summation over vibrational states

Upper and lower bounds of the vibrational sums involved in the polanzability tensor are derived. The lower bound leads to a simplified formula applicable to resonance Raman scattering in both weak and strong coupling cases. A new expansion of the vibrational sum is introduced and useful expressions for excitation profiles are obtained.     

Dependence of molecular recognition of fullerene derivative on the adlayer structure of zinc octaethylporphyrin formed on Au(100) surface

Adlayers of ZnOEP were prepared on reconstructed Au(100)-(hex) and unreconstructed Au(100)-(1 x 1) surfaces by immersing into a benzene solution containing ZnOEP molecules, and the adlayer structures were characterized by scanning tunneling microscopy (STM). A hexagonally arranged ZnOEP array was formed on an Au(100)-(hex) surface, whereas a rectangularly arranged ZnOEP array was found on an Au(100)-(1 x 1) surface. The adlayer structure of ZnOEP was dependent upon the underlying Au atomic arrangements. Furthermore, an investigation of the spuramolecular assembly for these modified surfaces was carried out by using an open-cage C(60) derivative (opened C(60)). A supramolecular assembled adlayer with a 1:1 composition of opened C(60)/ZnOEP was formed on Au(100)-(hex), whereas aggregates of opened C(60) were found on the ZnOEP-modified Au(100)-(1 x 1) surface. Electrochemical responses of opened C(60) were significantly influenced by underlying ZnOEP arrays. This finding suggests that precise control of underlying ZnOEP adlayers with the Au atomic structure is important to recognize the opened C(60) on them.     

Asymmetric synthesis of the hydronaphthalene moieties of mevinic acids

The hydronaphthalene moieties of mevinic acids are synthesized enantioselectively by using the asymmetric intramolecular Diels-Alder reaction catalyzed by a chiral titanium reagent.     

Structure of a 1:1 molecular complex of trans-9,10-dihydroxy-9,10-diphenyl-9,10-dihydroanthracene with ethanol

X-ray analysis of the title complex revealed hydrogen-bonded chains comprising two crystallographically independent types of $\text{trans}$-9,10-dihydroxy-9,10-diphenyl-9,10-dihydroanthracene molecules, in which the central 1,4-cyclohexadiene rings are respectively flat and very slightly puckered, with the ethanol molecules attached exclusively to the latter type.