Determination of caffeoylquinic acids and flavonoids inCynara scolymus L. by high performance liquid chromatography

Summary The main phenolic compounds in dried extracts fromCynara scolymus (artichoke)—monocaffeoylquinic acids, dicaffeoylquinic acid, and flavonoids–have been separated by high-performance liquid chromatography. By use of a narrow bore C₁₈ column and an acidic mobile phase this HPLC method enabled improved separation within 31 min with significantly reduced solvent consumption compared with other methods. The method was validated to demonstrate its linearity, precision, accuracy, and robustness. Twelve commercial samples were analyzed. Monocaffeoylquinic acids were the most abundant phenolic compounds; the amounts present ranged from 0.48 to 4.24%. The amounts of dicaffeoylquinic acids and flavonoids were smaller—from 0.03 to 0.52%. The method is a good combination of efficiency and economy and should be especially useful for commercial applications.     

Electron transfer dissociation of peptide anions

Ion/ion reactions of multiply deprotonated peptide anions with xenon radical cations result in electron abstraction to generate charge-reduced peptide anions containing a free-radical site. Peptide backbone cleavage then occurs by hydrogen radical abstraction from a backbone amide N to facilitate cleavage of the adjacent C-C bond, thereby producing a- and x-type product ions. Introduction of free-radical sites to multiply charged peptides allows access to new fragmentation pathways that are otherwise too costly (e. g., lowers activation energies). Further, ion/ion chemistry, namely electron transfer reactions, presents a rapid and efficient means of generating odd-electron multiply charged peptides; these reactions can be used for studying gas-phase chemistries and for peptide sequence analysis.     

Reissert compound studies. XXXI. Emetine analogs based on the reaction of the reissert anion with 1,3,4,6,7,11b-hexahydro-9, 10-dimethoxybenzo[a] quinolizin-2-ones

Reaction of the Reissert anion with the carbonyl group of 1,3,4,6,7,11b-hexahydro-9,10-dimethoxybenzo[a]quinolizin-2-one and with 3-ethyl-1,2,3,4,6,7-hexahydro-9,10-dimethoxy-11bH-benzo[a]quinolizin-2-carboxaldehyde give emetine analogs. This anion does not react with the carbonyl group of 3-aIkyl-1,3,4,6,7,11b-hexahydro-9,10-dimethoxybenzo[a]quinolizin-2-one but instead gives a rearrangement product and the benzoquinolizinone cyanohydrin.     

Directly visualizing carrier transport and recombination at individual defects within 2D semiconductors

Two-dimensional semiconductors (2DSCs) are promising materials for a wide range of optoelectronic applications. While the fabrication of 2DSCs with thicknesses down to the monolayer limit has been demonstrated through a variety of routes, a robust understanding of carrier transport within these materials is needed to guide the rational design of improved practical devices. In particular, the influence of different types of structural defects on transport is critical, but difficult to interrogate experimentally. Here, a new approach to visualizing carrier transport within 2DSCs, Carrier Generation-Tip Collection Scanning Electrochemical Cell Microscopy (CG-TC SECCM), is described which is capable of providing information at the single-defect level. In this approach, carriers are locally generated within a material using a focused light source and detected as they drive photoelectrochemical reactions at a spatially-offset electrolyte interface created through contact with a pipet-based probe, allowing carrier transport across well-defined, µm-scale paths within a material to be directly interrogated. The efficacy of this approach is demonstrated through studies of minority carrier transport within mechanically-exfoliated n-type WSe₂ nanosheets. CG-TC SECCM imaging experiments carried out within pristine basal planes revealed highly anisotropic hole transport, with in-plane and out-of-plane hole diffusion lengths of 2.8 µm and 5.8 nm, respectively. Experiments were also carried out to probe recombination across individual step edge defects within n-WSe₂ which suggest a significant surface charge (∼5 mC m⁻²) exists at these defects, significantly influencing carrier transport. Together, these studies demonstrate a powerful new approach to visualizing carrier transport and recombination within 2DSCs, down to the single-defect level.

Probe-based electrochemical techniques can be used to map carrier transport and recombination within two-dimensional semiconductors.     

Diffusion-based calibration for solid-phase microextraction of benzene, toluene, ethylbenzene, p-xylene and chlorobenzenes from aqueous samples

Short-term solid-phase microextraction (SPME) was performed to test a recently proposed semi-empirical model for the prediction of concentrations of analyte in water samples from the fibre-extracted mass without further calibration. The mass uptake rates obtained for benzene, toluene, ethylbenzene and p-xylene (BTEX) differ considerably from the before published, showing that interfibre comparability is a serious issue. The relative prediction errors are between -55% for benzene and +82% for p-dichlorobenzene under optimal conditions, i.e. they are by an order of magnitude higher than originally published. A sensitivity analysis shows the dominant influence of the estimated thickness of the diffusional boundary layer around the fibre on the concentration predicted. Empirical modification of the model equation for this parameter yields satisfactory results under the conditions tested for both BTEX and the selected chlorobenzenes.     

Atmospheric pressure laser desorption/chemical ionization mass spectrometry: a new ionization method based on existing themes

We have designed and constructed an atmospheric pressure laser desorption/chemical ionization (AP-LD/CI) source that utilizes a laser pulse to desorb intact neutral molecules, followed by chemical ionization via reagent ions produced by a corona discharge. This source employs a heated capillary atmospheric pressure inlet coupled to a quadrupole ion trap mass spectrometer and allows sampling under normal ambient air conditions. Preliminary results demonstrate that this technique provides approximately 150-fold increase in analyte ions compared to the ion population generated by atmospheric pressure infrared matrix-assisted laser desorption/ionization (AP-IR-MALDI).     

Experimental observation and prediction of interfacial tension and viscoelastic emulsion model behavior in novel phosphate glass-polymer hybrids

The interfacial tension of hybrids composed of a tin-based phosphate glass (Pglass) and thermoplastic polymers, low-density polyethylene (LDPE), polystyrene (PS), and polypropylene (PP) was investigated using pendant drop and droplet deformation methods. High surface tension values were determined for the pure Pglass and subsequently used to obtain interfacial tension values that were found to be greater than that of most polymer blends reported in the literature. Small amplitude oscillatory shear data were fitted to the Choi-Schowalter and Palierne emulsion models in order to estimate the interfacial tension and to validate the accuracy (or lack thereof) of using a polymer emulsion model on the special Pglass-polymer systems. Although some of the hybrids showed satisfactory agreement with the emulsion models, wide ranges of interfacial tensions were obtained, suggesting that a more complicated theory that explicitly takes the Pglass-polymer interactions, shape factor, and size distributions of the dispersed Pglass phase into account may be necessary for more accurate modeling of these special hybrid systems with enhanced benefits.     

Electron paramagnetic resonance spin label titration: a novel method to investigate random and site-specific immobilization of enzymes onto polymeric membranes with different properties

The immobilization of biological molecules onto polymeric membranes to produce biofunctional membranes is used for selective catalysis, separation, analysis, and artificial organs. Normally, random immobilization of enzymes onto polymeric membranes leads to dramatic reduction in activity due to chemical reactions involved in enzyme immobilization, multiple-point binding, etc., and the extent of activity reduction is a function of membrane hydrophilicity (e.g. activity in cellulosic membrane?polysulfone membrane). We have used molecular biology to effect site-specific immobilization of enzymes in a manner that orients the active site away from the polymeric membrane surface, thus resulting in higher enzyme activity that approaches that in solution and in increased stability of the enzyme relative to the enzyme in solution. A prediction of this site-specific method of enzyme immobilization, which in this study with subtilisin and organophosphorus hydrolase consists of a fusion tag genetically added to these enzymes and subsequent immobilization via the anti-tag antibody and membrane-bound protein A, is that the active site conformation will more closely resemble that of the enzyme in solution than is the case for random immobilization. This hypothesis was confirmed using a new electron paramagnetic resonance (EPR) spin label active site titration method that determines the amount of spin label bound to the active site of the immobilized enzyme. This value nearly perfectly matched the enzyme activity, and the results suggested: (a) a spectroscopic method for measuring activity and thus the extent of active enzyme immobilization in membrane, which may have advantages in cases where optical methods can not be used due to light scattering interference; (b) higher spin label incorporation (and hence activity) in enzymes that had been site-specifically immobilized versus random immobilization; (c) higher spin label incorporation in enzymes immobilized onto hydrophilic bacterial cellulose membranes versus hydrophobic modified poly(ether)sulfone membranes. These results are discussed with reference to analysis and utilization of biofunctional membranes.