Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

带息力更新风险模型的一个极值分布

本文讨论了带息力的更新风险模型,得到了破产前最大盈余分布的递推公式,且在此基础上还给出了它满足的积分方程.     

流动注射-ICP光谱分析中的基体效应和酸效应研究

本文讨论了流动注射-ICP光谱分析中的基体效应和酸效应。当基体(Na、Ca、Fe、Zn)的浓度大于5mg/ml时,待测元素的谱线强度表现出不同程度的降低;上述基体的引入对激发温度和电子密度的影响不明显;基体产生的抑制效应可能与改变了待测元素粒子的激发几率的因素有关;于载流体中加入一定量的基体元素,是消除或降低基体效应的有效方法。酸(HCl、HNO_3、H_2SO_4)对待测元素表现出不同程度的抑制效应,其主要原因是物理干扰所致。     

w-DENSITY AND w-BALANCED PROPERTY OF WEIGHTED GRAPHS

§ 1　IntroductionAll graphsconsidered in this paperare finite undirected ones withoutloops ormultipleedges.Our terminology and notation are standard exceptas indicated.A good reference forany undefined terms is[1 ] .Let G be a graph with vertex set V( G) and edge set E( G) .The density of G is definedbyd( G) =ε( G)ν( G) ,whereν( G) andε( G) denote| V( G) | and| E( G) | ,respectively.G is said to be balanced iffor each subgraph H of G we have d( H )≤ d( G) ,where V( H ) is assum…     

关于NF-环的构造

研究了无限的ＮＦ－环及有限的ＮＦ－环，并且给出了有限ＮＦ－环的构造．     

Plant processing by simultaneous lactic acid fermentation and enzyme hydrolysis

Traditional ensiling of plant material by anaerobic lactic acid fermentation was combined with enzymatic hydrolysis (ENLAC for short) with cell wall degrading enzymes (hemicellulases, cellulases, and pectinases) to increase fiber digestibility or to increase the recovery of cell content from plants. Such findings were made using 0.015% (w/w, wet basis) Phylacell® enzyme preparation by ENLAC of corn and corn-sorghum mixtures, but not of forage grasses. Addition to alfalfa of a mixture of cell wall degrading enzymes, such as NOVO Viscozyme® together with NOVO Celluclast® each at 0.2–1.0% (w/w, wet basis), resulted in more rapid ensiling and improvement of rumen digestibility of silage by 20%. After 20 d of ensiling at 25 °C when the same enzymes were added to alfalfa at the 1.0% level, protein recovery by pressing increased by 35%, β-carotene recovery by 80%, and chlorophyll/xanthophyll recovery by 30%. ENLAC with the same enzymes also increased the recovery of sclareol from muscatel sage by 400%.

     

石墨-六角氮化硼微晶混合物与水高压反应产物分析

 利用球磨法制备石墨-六角氮化硼微晶混合物，并在6.1 GPa、800~1 500 ℃条件下与水进行高压反应，以便研究用水作触媒合成B-C-N三元化合物的可能性。通过对反应产物的XRD、XPS谱分析发现：高压下随着温度的升高，反应产物中出现再结晶石墨，其晶化程度逐渐提高；但没有出现再结晶六角氮化硼，也未出现立方氮化硼。在球磨不充分条件下，石墨-六角氮化硼混合物的XRD谱没有完全弥散，它们与水高压反应时，能观察到石墨与立方氮化硼分别结晶的现象，但都没有形成B-C-N晶化结构。     

数学分析中的一题多解问题

通过两个积分 (一个是不定积分 ,一个是定积分 )及一个极限 ,说明如何灵活使用积分法解决积分问题 ,方法灵活、巧妙 ,适用范围广 .     

Characterization of oxide thin films using optical techniques

Thin films of oxide materials are playing a growing role as critical elements in optoelectronic devices and nanoscale devices. In this work, thin films of some typical oxides such as WO₃, Ga₂O₃ and SrTiO₃ were investigated. We present measurements of those films, using various optical techniques like photoconductivity transients over a wide time range and photo-Hall measurements. Analysis of the photo-Hall and photoconductivity data permits the determination of the contribution to the photoconductivity made by the carrier mobility and concentration. A model for dispersive carrier transport was proposed to explain the relaxation of the photoconductivity in oxide thin films. In addition, photoluminescence characterization was used to study microstructures and energy band in oxide thin films. The broad emission from oxide host, consisting of several band peaks, was likely due to a recombination process with several possible paths. The dependence of the luminescent intensity on the annealing atmosphere was associated with the presence of oxygen vacancies. It is suggested that our optical analysis efforts have improved the understanding of oxide thin films, and this should lead to the necessary advancements in a variety of devices.