非超临界干燥法制备SiO2气凝胶

应用廉价的国产硅溶胶为原料，通过凝胶过程和干燥过程条件的选择，以非超临界干燥技术最终获得了块状SiO2气凝胶.该气凝胶外观状态与应用正硅酸乙酯为原料制得的完全一致，其微观结构也相当良好，其直径和孔分布均匀.溶液的配比和pH对凝胶过程和气凝胶样品的密度有比较明显的影响，同时pH值与SiO2的粒径之间也有一定的关系.依据制备条件的变化，所得SiO2气凝胶的密度约在200～400 kg•m－3，比表面在250～300 m2•g－1之间变化，平均孔径约为11～20 nm，而孔隙率在91％左右.     

Synthesis and Structural Characterization of two Novel Copper(I) Complexes with Oxygen Donor

Two novel copper(I) complexes with Cu‐O bonds, [Cu₂L₂(PPh₃)₂](BF₄)₂ ( 1 ) and [Cu(L)(dppeo)](BF₄) ( 2 ) ( L = 6‐(4‐diethylmethylphosphonatephenyl)‐2,2′‐bipyridine, dppeo = bis(diphenylphosphino)ethane monoxide), have been prepared and their structures characterized. In the binuclear complex 1 , the ligand L serves as tridentate donor with the N, N′ and O as coordination atoms, and the two Cu^I atoms are bridged through both P = O donor atoms in different ligand L with a triphenylphosphine molecule as auxiliary ligand. While in mononuclear complex 2 , both ligands L and dppeo behave as bidentate with N^∧N from L and P^∧O from dppeo chelating to Cu^I atom.     

Reversible anion exchanges between the layered organic-inorganic hybridized architectures: syntheses and structures of manganese(II) and copper(II) complexes containing novel tripodal ligands

Six noninterpenetrating organic-inorganic hybridized coordination complexes, [Mn(3)(2)(H(2)O)(2)](ClO(4))(2).2 H(2)O (5), [Mn(3)(2)(H(2)O)(2)](NO(3))(2) (6), [Mn(3)(2)(N(3))(2)].2 H(2)O (7), [Cu(3)(2)(H(2)O)(2)](ClO(4))(2) (8), [Mn(4)(2)(H(2)O)(SO(4))].CH(3)OH.5 H(2)O (9) and [Mn(4)(2)](ClO(4))(2) (10) were obtained through self-assembly of novel tripodal ligands, 1,3,5-tris(1-imidazolyl)benzene (3) and 1,3-bis(1-imidazolyl)-5-(imidazol-1-ylmethyl)benzene (4) with the corresponding metal salts, respectively. Their structures were determined by X-ray crystallography. The results of structural analysis of complexes 5, 6, 7, and 8 with rigid ligand 3 indicate that their structures are mainly dependant on the nature of the organic ligand and geometric need of the metal ions, but not influenced greatly by the anions and metal ions. While in complexes 9 and 10, which contain the flexible ligand 4, the counteranion plays an important role in the formation of the frameworks. Entirely different structures of complexes 5 and 10 indicate that the organic ligands greatly affect the structures of assemblies. Furthermore, in complexes 5 and 6, the counteranions located between the cationic layers can be exchanged by other anions. Reversible anion exchanges between complexes 5 and 6 without destruction of the frameworks demonstrate that 5 and 6 can act as cationic layered materials for anion exchange, as determined by IR spectroscopy, elemental analyses, and X-ray powder diffraction.     

随机变量序列加权和的强收敛性

本文讨论了一般随机变量序列加权和的强收敛性．作为推论，得到一类鞅差序列加权和的收敛定理和若干经典的独立随机变量序列的强大数定律；已有的若干结论是本文结果的特例．     

Ligand effect in the synthesis of hyperbranched polymers via copper-catalyzed azide-alkyne cycloaddition polymerization (CuAACP)

Copper-catalyzed azide-alkyne cycloaddition polymerization (CuAACP) of AB₂ monomers demonstrated a chain-growth mechanism without any external ligand because of the complexation of in situ formed triazole groups with Cu catalysts. In this study, we explored the use of various ligands that affected the polymerization kinetics to tune the polymers’ molecular weights and the degree of branching (DB). Eight ligands were studied, including polyethylene glycol monomethyl ether (PEG₃₅₀, M_n = 350), tris(benzyltriazolylmethyl)amine (TBTA), 2,6-bis(1-undecyl-1H-benzo[d]imidazol-2-yl)pyridine (Py(DBim)₂), 2,2′-bipyridyl (bpy), 4,4′-di-n-nonyl-2,2′-bipyridine (dNbpy), N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA), N,N,N′,N″,N″-penta(n-butyl)diethylenetriamine (PBuDETA), and N,N,N′,N″,N″-pentabenzyldiethylenetriamine (PBnDETA). All ligands except PEG₃₅₀ exhibited stronger coordination with Cu(I) than the polytriazole polymer, which freed the Cu catalyst from polymers and resulted in dominant step-growth polymerization with simultaneous chain-growth feature. Meanwhile, the use of PEG₃₅₀ ligand retained the confined Cu in the polymer, demonstrating a chain-growth mechanism, but lower polymer molecular weights as compared with the no-external-ligand polymerization. Results indicated that aliphatic substituent groups on ligands had little effect on the molecular weights and DB of the polymers, but rigid aromatic substituent groups decreased both values. By varying the ligand species and amounts, hyperbranched polymers with DB value ranging from 0.53 ([TBTA]₀/[Cu]₀ = 5) to 0.98 ([PMDETA]₀/[Cu]₀ = 2) have been achieved. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2238–2244     

Determination of hydroxysafflor yellow A in biological fluids of patients with traumatic brain injury by UPLC‐ESI‐MS/MS after injection of Xuebijing

A simple, novel, specific, rapid and reproducible ultra‐performance liquid chromatography electrospray ionization tandem mass spectrometry method has been developed and validated for the determination of hydroxysafflor yellow A (HSYA) in biological fluids (plasma, urine and cerebrospinal fluid) of patients with traumatic brain injury after intravenous injection of Xuebijing (XBJ). Liquid–liquid extraction was performed, and separation was carried out on an Acquity UPLC? BEH C₁₈ column, with gradient elution using a mobile phase composed of methanol and 0.1% formic acid at a flow rate of 0.3 mL/min. A triple quadrupole tandem mass spectrometer with electrospray ionization was used for the detection of HSYA. The mass transition followed was m/z 611.0 → 491. The retention time was less than 3.0 min. The calibration curve was linear in the concentration range from 2 to 6125 ng/mL for cerebrospinal fluid, plasma and urine. The intra‐ and inter‐day precisions were <10%, and the relative standard deviation of recovery was <15% for HSYA in biological matrices. The method was successfully applied for the first time to quantify HSYA in the biological fluids (especially in cerebrospinal fluid) of patients with traumatic brain injury following intravenous administration of XBJ. Copyright © 2014 John Wiley & Sons, Ltd.     

Enhanced cyclability of sulfur cathodes in lithium-sulfur batteries with Na-alginate as a binder

Na-alginate as a binder in an aqueous solvent has been applied in the preparation of sulfur cathodes for lithium-sulfur batteries.Their electrochemical performances have been investigated by a charge-discharge cycle test and electrochemical impedance spectroscopy (EIS).The EIS tests indicated that the alginate sulfur cathode had lower resistance and better kinetic characteristics than those of the poly (vinylidene fluoride) (PVDF) sulfur cathode using PVDF as a binder in a N-methy-2-pyrrolidone (NMP) solvent.The charge-discharge tests showed that the discharge capacity and the capacity retention rate of Na-alginate sulfur cathode were 508 mAh·g-1and 65.4% at the 50th cycle with a current density of 335 mA·g-1.Compared with PVDF sulfur cathode,the alginate sulfur cathode showed a remarkably better cycle performance.These results show that the alginate binder has promising potential for lithium-sulfur battery applications.     

Pyrone Diels–Alder Routes to Indolines and Hydroindolines: Syntheses of Gracilamine,Mesembrine, and Δ7‐Mesembrenone

Although the Diels–Alder reaction has long been utilized for the preparation of numerous heterocycles, opportunities to extend its power remain. Herein, we detail a simple, modular, and robust approach that combines various amines regioselectively with 4,6‐dichloropyrone to create substrates which, under appropriate conditions, can directly deliver varied indolines and hydroindolines through [4+2] cycloadditions with substitution patterns difficult to access otherwise. As an initial demonstration of the power of the strategy, several different natural products have been obtained either formally or by direct total synthesis, with efforts toward one of these—the complex amaryllidaceae alkaloid gracilamine—affording the shortest route to date in terms of linear step count.     

Application of flammability limit criteria on non-ASTM standard equipment

Journal of Thermal Analysis and Calorimetry - Accurate data of flammability limits for flammable gases and vapors are needed to prevent fires and explosions. The flammability limit, which is the...