Novel and highly sensitive mixed-polymeric electrokinetic chromatography system for determination of contaminants and impurities of heparin samples

A mixed‐polymeric electrokinetic chromatography system has been developed for the simultaneous determination of a contaminant like oversulfated condroitin sulfate (OSCS) and impurities expressed as dermatan (Der) in heparin (Hep) samples. The EKC system consisted of 0.5% w/v polymeric β‐CD, 0.4% w/v tetronic^® 1107 and 400 mM tris‐phosphate buffer at pH 3.5. The optimized electrophoretic conditions included the use of an uncoated‐silica capillary of 50 cm of total length and 75 μm id, an applied voltage of ?7 kV, a temperature of 30°C and 200 nm UV‐detection. The highly sensitive method developed showed low values of LOD, 0.07% w/w (0.07 μg/mL) (OSCS) and 0.1% w/w (0.1 μg/mL) (Der), and values of LOQ 0.2% w/w (0.2 μg/mL) (OSCS) and 0.3% w/w (0.3 μg/mL) (Der) with a concentration level of Hep sample as low as 0.1 mg/mL. Additional parameters of validation such as specificity, linearity, accuracy, and robustness were evaluated according to international guidelines. Owing to its simplicity, high sensitivity, and reliability, the proposed method can be an advantageous alternative to the traditional methodologies for the analysis of Hep in raw material and specially in finished products because of the low amounts of Hep sample required.     

A novel application of immobilization on membranes for the separation and spectrofluorimetric quantification of amiloride and furosemide in pharmaceutical samples

A new, simple and highly sensitive method for spectrofluorimetric determination of amiloride (AMI) and furosemide (FUR) in pharmaceuticals is presented. The proposed method is based on the separation of AMI from FUR by solid-phase extraction using a nylon membrane, followed by spectrofluorimetric determination of both drugs, on the solid surface and the filtered aqueous solution, respectively. AMI shows low native fluorescence, but its separation-preconcentration by immobilization (solid-phase extraction) on nylon membrane surface provides a considerable enhancement in fluorescence intensity. The fluorescence determination is carried out at λ_ex = 237, λ_em = 415 nm for FUR; and λ_ex = 365, λ_em = 406 nm for AMI. The calibration graphs are linear in the range 3.20 × 10⁻⁴ to 0.8 μg mL⁻¹and 1.33 × 10⁻³ to 4.0 μg mL⁻¹, for AMI and FUR, respectively, with a detection limit of 9.62 × 10⁻⁵ and 4.01 × 10⁻⁴ μg mL⁻¹ (S/N = 3). The commonly found excipients in commercial pharmaceutical formulations do not interfere. The developed method is successfully applied to the determination of both drugs in pharmaceutical formulations.     

Hydrogen‐bonded nucleophile effects in ANS: the reactions of 1‐chloro and 1‐fluoro‐2,4‐dinitrobenzene with 2‐guanidinobenzimidazole, 1‐(2‐aminoethyl)piperidine and N‐(3‐aminopropyl)morpholine in aprotic solvents

The kinetics of the reactions of 2,4‐dinitrofluorobenzene (DNFB) and 2,4‐dinitrochlorobenzene (DNClB) with 2‐guanidinobenzimidazole (2‐GB) at 40 ± 0.2 °C in dimethylsulphoxide (DMSO), toluene, and in toluene–DMSO mixtures, and with 1‐(2‐aminoethyl)piperidine (2‐AEPip) and N‐(3‐aminopropyl)morpholine (3‐APMo) in toluene at 25 ± 0.2 °C were studied under pseudo first‐order conditions. For the reactions of 2‐GB carried out in pure DMSO, the second‐order rate coefficients were independent of the amine concentration. In contrast, the reactions of 2‐GB with DNFB in toluene, showed a kinetic behaviour consistent with a base‐catalysed decomposition of the zwitterionic intermediate. These results suggest an intramolecular H‐bonding of 2‐GB in toluene, which is not present in DMSO. To confirm this interpretation the reactions were studied in DMSO–toluene mixtures. Small amounts of DMSO produce significant increase in rate that is not expected on the basis of the classical effect of a dipolar aprotic medium; the effect is consistent with the formation of a nucleophile/co‐solvent mixed aggregate. For the reactions of 3‐APMo with both substrates in toluene, the second‐order rate coefficients, k_A, show a linear dependence on the [amine]. 3‐APMo is able to form a six‐membered ring by an intramolecular H‐bond which prevents the formation of self‐aggregates. In contrast, a third order was observed in the reactions with 2‐AEPip: these results can be interpreted as a H‐bonded homo‐aggregate of the amine acting as a better nucleophile than the monomer. Most of these results can be well explained within the frame of the ‘dimer nucleophile’ mechanism. Copyright © 2010 John Wiley & Sons, Ltd.     

A version of Stöber synthesis enabling the facile prediction of silica nanospheres size for the fabrication of opal photonic crystals

A sol-gel synthesis procedure based on the method proposed by Stöber et al. (J Colloid Interface Sci 26:302–315, 1968) has been adopted for the one-step preparation of mono-dispersed silica nanospheres. An excellent control of the particle diameter over a wide range is obtained by varying the amount of silicon alkoxide only, while the concentration of all other components is kept fixed: this allows the fabrication of artificial opals with a finely tuned and precisely predictable lattice parameter.     

Building the Additive Utility Functions for CAD-UFRJ Evaluation Staff Criteria

This paper presents an application of the UTA method for building utility functions for the evaluation criteria defined by the Staff Evaluation Commission (CAD) of the Rio de Janeiro Federal University (UFRJ). Every year, the CAD-UFRJ gives the staff evaluation results for each Postgraduate Engineering Programme. However, the method used to generate the staff evaluation is assumed unknown. Trying to find the CAD-UFRJ preference structure, the evaluation results supplied by CAD-UFRJ are used to apply the UTA method. Some additional information obtained from the CAD-UFRJ data is incorporated in the optimal solutions analysis.     

New Features in the Lipid A Structure of <Emphasis Type="Italic">Brucella suis</Emphasis> and <Emphasis Type="Italic">Brucella abortus</Emphasis> Lipopolysaccharide

Brucellaceae are Gram-negative bacteria that cause brucellosis, one of the most distributed worldwide zoonosis, transmitted to humans by contact with either infected animals or their products. The lipopolysaccharide exposed on the cell surface has been intensively studied and is considered a major virulence factor of Brucella. In the last years, structural studies allowed the determination of new structures in the core oligosaccharide and the O-antigen of this lipopolysaccharide. In this work, we have reinvestigated the lipid A structure isolated from B. suis and B. abortus lipopolysaccharides. A detailed study by MALDI-TOF mass spectrometry in the positive and negative ion modes of the lipid A moieties purified from both species was performed. Interestingly, a new feature was detected: the presence of a pyrophosphorylethanolamine residue substituting the backbone. LID-MS/MS analysis of some of the detected ions allowed assurance that the Lipid A structure composed by the diGlcN3N disaccharide, mainly hexa-acylated and penta-acylated, bearing one phosphate and one pyrophosphorylethanolamine residue.

Open image in new window

Graphical abstract ?

     

Pore Shape Effects on the Relative Permeability of Gas and Condensate in Three-Dimensional Pore Networks

Transport in Porous Media -     

Pore-Level Modeling of Gas and Condensate Flow in Two- and Three-Dimensional Pore Networks: Pore Size Distribution Effects on the Relative Permeability of Gas and Condensate

We present a mechanistic model of retrograde condensation processes in two- and three-dimensional capillary tube networks under gravitational forces. Condensate filling-emptying cycles in pore segments and gas connection–isolation cycles are included. With the pore-level distribution of gas and condensate in hand, we determine their corresponding relative permeabilities. Details of pore space and displacement are subsumed in pore conductances. Solving for the pressure field in each phase, we find a single effective conductance for each phase as a function of condensate saturation. Along with the effective conductance for the saturated network, the relative permeability for each phase is calculated. Our model porous media are two- and three-dimensional regular networks of pore segments with distributed size and square cross-section. With a Monte Carlo sampling we find the optimum network size to avoid size effects and then we investigate the effect of network dimensionality and pore size distribution on the relative permeabilities of gas and condensate.