Lagrangian Duality in Set-Valued Optimization

In this paper, we study optimization problems where the objective function and the binding constraints are set-valued maps and the solutions are defined by means of set-relations among all the images sets (Kuroiwa, D. in Takahashi, W., Tanaka, T. (eds.) Nonlinear analysis and convex analysis, pp. 221–228, 1999). We introduce a new dual problem, establish some duality theorems and obtain a Lagrangian multiplier rule of nonlinear type under convexity assumptions. A necessary condition and a sufficient condition for the existence of saddle points are given. The authors thank the two referees for valuable comments and suggestions on early versions of the paper. The research of the first author was partially supported by Ministerio de Educación y Ciencia (Spain) Project MTM2006-02629 and by Junta de Castilla y León (Spain) Project VA027B06.     

Change in the magnetic state of a surface upon formation of hydrogen bonds during adsorption

It is established that reversible adsorption of water and methyl alcohol molecules, occurring via formation of hydrogen bonds, changes the dynamic properties of domain walls in the surface region of soft ferromagnets, as well as their initial static magnetic susceptibility. A mechanism is proposed for the effects revealed.     

On the Use of the Restitution Condition in Flexible Body Dynamics

The difference between the classical treatment offlexible body impact and the treatment of impact in flexiblemultibody dynamics is due to several fundamental reasons. Inthe classical impact theory, simple structures such as beamsand plates are used. Infinite dimensional models can bedeveloped for these simple structural elements to study theimpact dynamics and the wave propagation problem. Flexiblemultibody impact problems, on the other hand, involve bodieswith complex geometry that cannot be modeled using infinitenumber of degrees of freedom. Furthermore, the classicalimpact theory has been mainly concerned with the impactbetween a rigid mass that moves without constraints beforeit impacts a simple flexible structure. This is not amultibody simulation scenario in which the impact occursbetween kinematically constrained bodies that are subjectedto impulsive constraint forces in addition to the impactforces. These constraint forces can influence the motion ofthe two bodies immediately after impact, and as aconsequence, the simple classical theory scenario of impactdoes not apply. It is the objective of this paper to discussthe use of the restitution condition in flexible multibodyimpact problems and demonstrate that the use of thisapproach does not exclude the classical formulation.Nonetheless, the impulse momentum balance approach can serveas an effective and efficient procedure for solving theimpact problem in finite dimensional models that do not obeythe classical wave theory. Energy results of simplestructural elements are presented in order to demonstratethe consistency of using the impulse momentum balanceapproach in solving impact problems in finite dimensionalflexible body applications.     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007     

Development of a universal constant rate thermal analysis system for being used with any thermoanalytical instrument

The SCTA method implies to control the temperature in such a way that the reaction rate changes with the time according to a function previously defined by the user. Constant Rate Thermal Analysis (CRTA) is one of the most commonly used SCTA methods and implies achieving a temperature profile at which the reaction rate remains constant all over the process at a value previously selected by the user. This method permits to minimize the influence of heat and mass transfer phenomena on the forward reaction. The scope of this work is to develop a universal CRTA temperature controller that could be adapted to any thermoanalytical device. The thermoanalytical signal is programmed to follow a preset linear trend by means of a conventional controller that at the time controls a second conventional temperature programmer that forces the temperature to change for achieving the trend programmed for the thermoanalytical signal. Examples of the performance of this control system with a Thermobalance and a Thermomechanical Analyser (TMA) are given.     

Temperature modulated DSC study of the kinetics of free radical isothermal network polymerization

Temperature modulated differential scanning calorimetry (TMDSC) is used to study the kinetics of the free radical isothermal polymerization of triethyleneglycol dimethacrylate (TEGDMA). Azo-bis-isobutironitrile was used as initiator. The polymerization’s temperature is lower than the final glass transition temperature of the polymer network. The measurement of the average heat flow released and the heat capacity during the reaction allows identifying the different stages of the reaction. The presence of double peaks in the heat flow is ascribed to the autoacceleration. The influence of temperature, measuring conditions and oxygen are described. Vitrification is detected by the drop in heat capacity. It occurs at increasing conversion rates for increasing temperatures. After vitrification, the diffusion-controlled reaction continues.     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

A potentiometric DNA sensor for determining autoimmune antibodies to DNA

A new technique is proposed for detecting interactions between DNA and DNA autoimmune antibodies using a potentiometric sensor based on a glassy-carbon electrode modified with polyaniline and native DNA from chicken erythrocytes. It is shown that the DNA-antibody interaction changes the rate of polyaniline doping in transferring the DNA sensor from an alkaline (pH 7.5) solution, which is optimum for the immunochemical reaction, to an acidic (pH 3.0) solution. The dynamics of the variation of the DNA sensor potential depends on the titer of antibodies and their origin. The dependence of the DNA sensor signal on the dilution of the blood sera from systemic lupus erythematosus and autoimmune thyroiditis patients shows that DNA antibodies can be diagnosed by the characteristic maximum in the dilution curve found in the range of serum dilutions from 1: 20 to 1: 50.