Amperometric detection of nitrite and nitrate at tetraruthenated porphyrin-modified electrodes in a continuous-flow assembly

The modification of a glassy carbon surface by coating with an electrostatically assembled film of tetraruthenated cobalt porphyrin/(meso-tetra(4-sulphonatephenyl)porphyrinate zinc(II) yields an indicator electrode that allows the determination of nitrite to be performed with a limit of detection of 0.1 μM in a flow injection configuration. The dynamic range extends up to 1000 μM and the repeatability of the measurements was evaluated to be 1.5% with a throughput of 50 samples per hour. The efficiency of the bilayered film to mediate the electron transfer allows the determinations to be performed at a less positive potential (+0.75 V) with enhanced sensitivity. The coating also prevents the surface poisoning and its stability is maintained over several weeks. The same detector was used for determination of nitrate after reduction to nitrite in a reductor column containing copperised cadmium. This method was used for the determination of nitrate and nitrite in mineral water, saliva and cured meats, the results being in agreement with certified values and those obtained by using recommended procedures.     

Solvent dependent conformational isomerism and ligand oxidation of novel Ru(II) cyclen complexes

The synthesis of cis-[Ru(II)(cyclen)(L)(x)](n+) (cyclen = 1,4,7,10-tetraazacyclododecane and L = 2,2'-bipyridine (bpy), phenanthroline (phen) or 4-cyanopyridinium (4-NCpyH(+))) is reported. The freshly prepared complexes are stable in aprotic solvents and cyclen undergoes oxidative dehydrogenation reaction at high pH. These compounds also present solvent dependent conformational isomerization.     

Mild one-pot conversion of carboxylic acids to amides or esters with Ph3P/trichloroisocyanuric acid

The reaction of trichloroisocyanuric acid (TCICA) and triphenylphosphine in the presence of a carboxylic acid results in the in situ formation of the corresponding acid chloride under mild conditions. Subsequent addition of amines or alcohols, in the presence of a tertiary amine affords the corresponding amides, or esters, in good to excellent yields. The methodology was applied to the synthesis of a dipeptide.     

Reactivity of 2-halo-2H-azirines. 1. Reactions with nucleophiles.

Nucleophilic substitution reactions of 2-halo-2H-azirines 1a, 1b, 1d, and 1e with potassium phthalimide and aniline allowed the preparation of new substituted 2H-azirines 2-5. The reactions of 2-bromo-2H-azirine 1a with methylamine led to the synthesis of alpha-diimines 7 and 8. 2-Halo-2H-azirines were also established as building blocks for the synthesis of a range of heterocyclic compounds, namely, quinoxalines 10a-10d, 3-oxazoline 14, and 2H-[1,4]oxazines 18 and 20. X-ray crystal structures of alpha-diimine 7, 3-oxazoline 14, and 2H-[1,4]oxazine 18 are reported.     

Anilinepropylsilica xerogel used as a selective Cu (II) adsorbent in aqueous solution

The metal ion adsorption properties of the microporous hybrid anilinepropylsilica xerogel were studied using divalent copper, zinc, and cadmium ions in aqueous solutions in concentrations ranging from 10(-4) up to 5x10(-3) moll(-1). At low concentrations the surface of the solid phase presents selectivity for Cu (II), even in competitive conditions. This preferential sorption ability for copper in relation to zinc and cadmium ions was interpreted by considering the xerogel morphology.     

A new procedure for bovine milk digestion in a focused microwave oven: gradual sample addition to pre-heated acid

Milk samples can be efficiently digested using a focused microwave oven, however the conventional procedure of addition of concentrated acids to the liquid sample leads to digestates with elevated acidity and residual carbon concentrations. In this work a focused microwave oven was applied for acid digestion of bovine milk samples using a conventional and an alternative procedure based on gradual sample addition to hot and concentrated acids. A two-level 2³ full factorial design experiment with eight runs was carried out to evaluate the optimum experimental conditions for reducing both the residual carbon and the final acidity of digestates. The three studied parameters were: temperature of the digestion medium for sample addition, addition of sulfuric acid before the sample or during the first step, and number of aliquots of the sample gradually added. The best conditions were attained by adding small aliquots of milk (ten-fold a volume of 0.5 ml added during 5.0 min) to a digestion mixture containing 3.0 ml nitric acid plus 1.0 ml sulfuric acid heated at 105 °C. It was demonstrated that the digestion efficiency of the alternative procedure was better than the conventional procedure, i.e. 98 and 80%, respectively. The alternative procedure was applied for determination of Ba, Ca, Cu, K, Mg, Na, P, and Zn in whole and non-fat bovine milk. The accuracy was proved using two certified reference materials (whole and non-fat milk powder).     

Metal furnace heated by flame as a hydride atomizer for atomic absorption spectrometry: Sb determination in environmental and pharmaceutical samples

The present work describes a metallic hydride atomizer for atomic absorption spectrometry, by evaluating the performance of the Inconel 600^® tube. For this purpose, stibine was used as the model volatile compound and antimony determination in river and lake sediments and in pharmaceutical samples was carried out to assess the metal furnace performance. Some parameters are evaluated such as those referring to the generation and transport of the hydride (such as KBH₄ and acid concentrations, carrier gas flow rate, injected volume, etc.), as well as those referring to the metal furnace (such as tube hole area, flame composition, long-term stability, etc.). The method presents linear Sb concentration from 2 to 80 μg L⁻¹ range (r > 0.998; n = 3) and the analytical frequency of ca. 140 h⁻¹. The limit of detection (LOD) is 0.23 μg L⁻¹ and the precision, expressed as R.S.D., is less than 5% (40 μg L⁻¹; n = 10). The accuracy is evaluated through the reference materials, and the results are similar at 95% confidence level according to the t-test.