Use of x-ray fluorescence spectrometry in ion-exchange studies of leach liquors

Equilibrium and kinetic studies of ion exchange of a complex leach liquor from coal ash, with strongly basic resins and a liquid ion exchanger are reported. The multi-component system was studied by determining the composition of the effluents and by non-destructive analysis of the loaded ion exchangers by XRF spectrometry. In the case of column operation, the elution processes were investigated by the same method, which was very appropriate for non-destructive monitoring of resin regeneration steps done repeatedly with the same resin sample.     

On lower bounds of number of perfect matchings in fullerene graphs

Couting perfect matchings in graphs is a very difficult problem. Some recently developed decomposition techniques allowed us to estimate the lower bound of the number of perfect matchings in certain classes of graphs. By applying these techniques, it will be shown that every fullerene graph with p vertices contains at least p/2+1 perfect matchings. It is a significant improvement over a previously published estimate, which claimed at least three perfect matchings in every fullerene graph. As an interesting chemical consequence, it is noted that every bisubstituted derivative of a fullerene still permits a Kekulé structure.     

Delphinidin–Aluminum(III) Complexes in Aqueous and Non-Aqueous Media: Spectroscopic Characterization and Theoretical Study

Summary. The study of delphinidin complexation with trivalent aluminum in acidic aqueous buffered (pH 3.0 and 3.8) and methanolic solutions was performed utilizing electronic absorption spectroscopy and quantum chemical calculations. In its structure delphinidin possesses several chelating sites in competition towards aluminum(III). Molar ratio plots denoted the formation of only one aluminum(III):delphinidin complex of stoichiometry of 1:1 in both investigated media. Semiempirical calculations, performed at the restricted HF AM1 level, enabled the determination of the structural features of free delphinidin and structural modifications caused by chelation of aluminum(III). Considering the pigment molecular structure and the results of the theoretical calculations it is possible to equally implicate C3′–C4′ and C4′–C5′ hydroxyl groups as those with the predominant chelating power.     

Fluorescence-dip infrared spectroscopy and predissociation dynamics of OH A 2Sigma+ (v = 4) radicals

Fluorescence-dip infrared spectroscopy, an UV-IR double-resonance technique, is employed to characterize the line positions, linewidths, and corresponding lifetimes of highly predissociative rovibrational levels of the excited A (2)Sigma(+) electronic state of the OH radical. Various lines of the 4 <--2 overtone transition in the excited A (2)Sigma(+) state are observed, from which the rotational, centrifugal distortion, and spin-rotation constants for the A (2)Sigma(+) (v = 4) state are determined, along with the vibrational frequency for the overtone transition. Homogeneous linewidths of 0.23-0.31 cm(-1) full width at half maximum are extracted from the line profiles, demonstrating that the N = 0 to 7 rotational levels of the OH A (2)Sigma(+) (v = 4) state undergo rapid predissociation with lifetimes of < or =23 ps. The experimental linewidths are in near quantitative agreement with first-principles theoretical predictions.     

Concentrations of some elements in the coastal sea sediments: Bays with marinas

Summary Surface sediments and sediment cores from two bays in the Adriatic sea (Punat Bay and Soline Bay, Croatia) have been analyzed for a number of elements, in particular: Ti, V, Mn, Fe, Cu, Zn, As and Pb, by using XRF. Maps of elemental distribution in surface sediments show increased concentrations for some elements present in antifouling paints (Cu, Zn, Pb) near the service areas in the villages or marinas. Core profiles for these elements were used to evaluate the environmental impact of newly constructed marinas. Source partition indicates the influence of other sources located in near by villages. The critical factor in these considerations was shown to be water exchange with the open sea.     

New class of potent catalysts of O2.-dismutation. Mn(III) ortho-methoxyethylpyridyl- and di-ortho-methoxyethylimidazolylporphyrins

Three new Mn(III) porphyrin catalysts of O2.-dismutation (superoxide dismutase mimics), bearing ether oxygen atoms within their side chains, were synthesized and characterized: Mn(III) 5,10,15,20-tetrakis[N-(2-methoxyethyl)pyridinium-2-yl]porphyrin (MnTMOE-2-PyP(5+)), Mn(III)5,10,15,20-tetrakis[N-methyl-N'-(2-methoxyethyl)imidazolium-2-yl]porphyrin (MnTM,MOE-2-ImP(5+)) and Mn(III) 5,10,15,20-tetrakis[N,N'-di(2-methoxyethyl)imidazolium-2-yl]porphyrin (MnTDMOE-2-ImP(5+)). Their catalytic rate constants for O2.-dismutation (disproportionation) and the related metal-centered redox potentials vs. NHE are: log k(cat)= 8.04 (E(1/2)=+251 mV) for MnTMOE-2-PyP(5+), log k(cat)= 7.98 (E(1/2)=+356 mV) for MnTM,MOE-2-ImP(5+) and log k(cat)= 7.59 (E(1/2)=+365 mV) for MnTDMOE-2-ImP(5+). The new porphyrins were compared to the previously described SOD mimics Mn(III) 5,10,15,20-tetrakis(N-ethylpyridinium-2-yl)porphyrin (MnTE-2-PyP(5+)), Mn(III) 5,10,15,20-tetrakis(N-n-butylpyridinium-2-yl)porphyrin (MnTnBu-2-PyP(5+)) and Mn(III) 5,10,15,20-tetrakis(N,N'-diethylimidazolium-2-yl)porphyrin (MnTDE-2-ImP(5+)). MnTMOE-2-PyP(5+) has side chains of the same length and the same E(1/2), as MnTnBu-2-PyP(5+)(k(cat)= 7.25, E(1/2)=+ 254 mV), yet it is 6-fold more potent a catalyst of O2.-dismutation , presumably due to the presence of the ether oxygen. The log k(cat)vs. E(1/2) relationship for all Mn porphyrin-based SOD mimics thus far studied is discussed. None of the new compounds were toxic to Escherichia coli in the concentration range studied (up to 30 microM), and protected SOD-deficient E. coli in a concentration-dependent manner. At 3 microM levels, the MnTDMOE-2-ImP(5+), bearing an oxygen atom within each of the eight side chains, was the most effective and offered much higher protection than MnTE-2-PyP(5+), while MnTDE-2-ImP(5+) was of very low efficacy.     

Role of the solvent in thin-layer chromatography of steroids on alumina

The effects of different binary solvents on the retention behaviour of some steroids in thin-layer chromatography on alumina were studied. The slope of the linear relationship between the retention constant of the steroid and the logarithm of the volume fraction fo the polar component in the binary solvent mixture depends predominantly on the diluent. Linear relationships between the axis intercepts and slopes of particular steroids exists for all chromatographic systems examined. The slope of this relationships is a function of the retention constant of the steroid hydroxyl group.     

Aromatic substitution

It is demonstrated that a previously developed topological expression for the total π-electron energy of aromatic molecules provides a good qualitative account of localization energies. The logarithm of the ratio of the algebraic structure counts for the ground state and the localized reaction intermediate is the principle energy determining factor. This expression fails for hydrocarbons with unusually small HOMO-LUMO separations. An alternative topological expression that includes a correction for this situation provides an excellent non-empirical explanation for the successful empirical use of Dewar reactivity numbers in correlating exact localization energies. The present analysis provides an explanation for the success of the traditional resonance structure counting technique in predicting relative rates of aromatic substitution. The analysis develop applied only to alternant hydrocarbons.     

Application of the ring oven method to the determination of dyestuffs

Summary The Weisz ring oven method has been applied to the semiquantitative determination of indigo carmine, erythrosin A, amaranth O, new coccine, Victoria blau B, tartrazine, azorubin S, alizarin S, eosin, light green SF, Guinea green B, fuchsin, eriochrome black T, saphranine, ponceau 3 R, cyanine, gelborange S, and methyl violet 6 B. The amount of dye needed ranges from 0.5 to 20g, and the error is generally less than 5%. The method has been used for the determination of azorubin S, methyl violet 6 B, tartrazine, and amaranth O in various materials.

---

Zusammenfassung Die Ringofenmethode vonWeisz wurde für die semiquantitative Bestimmung folgender Farbstoffe angewendet: Indigocarmin, Erythrosin A, Amaranth O, Neucoccin, Viktoria blau B, Tartrazin, Azorubin S, Alizarin S, Eosin, Lichtgrün SF, Guineagrün B, Fuchsin, Eriochromschwarz T, Saphranin, Ponceau 3 R, Cyanin, Gelborange S und Methylviolett 6 B. Die dazu nötige Farbstoffmenge beträgt 0,5 bis 20g, der Fehler ist im allgemeinen geringer als 5%. Die Methode wurde für die Bestimmung von Azorubin S, Methylviolett 6 B, Tartrazin und Amaranth O in verschiedenen Materialien angewendet.

---

Résumé On a appliqué la méthode du four annulaire deWeisz au dosage semi-quantitatif du carmin d'indigo, de l'érythrosine A, de l'amaranthe O, de la coccine nouvelle, du bleu Victoria B, de la tartrazine, de l'azorubine S, de l'alizarine S, de l'éosine, du vert lumière SF, du vert Guinée B, de la fuchsine, du noir ériochrome T, de la safranine, du ponceau 3 R, de l'orangé jaune, de la cyanine S et du violet de méthyle 6 B. La quantité de colorant nécessaire va de 0,5 à 20g et l'erreur est généralement inférieure à 5%. On a appliqué la méthode au dosage de l'azorubine S, du violet de méthyle 6 B, de la tartrazine et de l'amaranthe O dans diverses substances.

---

---

We wish to thank Mrs.Lidija Pfendt of the Faculty of Sciences in the University of Belgrade for doing the spectrophotometric analyses.     

The evolution of comprehensive two-dimensional gas chromatography (GC x GC)

For a technology little over a decade old, comprehensive two-dimensional gas chromatography (GC x GC) has quickly reached the status of one of the most powerful analytical tools for volatile organic compounds. At the heart of any GC x GC system is an interface, which physically connects the primary and the secondary columns and acts to preserve the separation obtained in the first dimension (first column) while allowing additional separation in the second dimension. The paper presents a review of the technology, including fundamental principles of the technique, data processing and interpretation and a timeline of inventive contributions to interface design. In addition, applications of the technique are presented, with a more detailed discussion of selected examples.