Stability of tokamak plasmas with internal transport barriers against high n ideal magnetohydrodynamic ballooning mode

A ballooning mode equation for tokamak plasma, with the toroidicity and the Shafranov shift effects included, is derived for a shift circular flux tokamak configuration. Using this equation, the stability of the plasma configuration with an internal transport barrier （ITB） against the high n （the toroidal mode number） ideal magnetohydrodynamic （MHD） ballooning mode is analysed. It is shown that both the toroidicity and the Shaftanov shift effects are stabilizing. In the ITB region, these effects give rise to a low shear stable channel between the first and the second stability regions. Out of the ITB region towards the plasma edge, the stabilizing effect of the Shaftanov shift causes the unstable zone to be significantly narrowed.     

关于半无爪图点泛圈性的两个结果

给出了半无爪图(quasi-claw-freegraph)点泛圈性方面的两个结果,作为推论,可得到D.Oberly,D.Sumner,L.Clark等人的相关结果.     

用拓扑指数S_i研究碳氢化合物的沸点(Ⅲ)

定义了拓扑指数Ｓｉ（ｉ＝１，２，３，４），并选取包含双、三键、环及苯环的碳氢化合物为研究对象，计算了这些化合物的拓扑指数Ｓｉ，同时用Ｓｉ相关了它们的沸点．结果较文献值有所改善．并从Ｓｉ中筛选出了Ｓ     

用激光感生荧光法测量亚稳态原子寿命

本文用激光感生荧光法(LIF)分析了Gd原子亚稳态能级215cm~(-1),533cm~(-1),999cm~(-1)在原子束中的速度分布。由原子束轴线上两不同点上的亚稳态原子速度分布的变化得到了亚稳态原子的寿命。理论分析和实验结果表明这是一种简单、灵敏并且有效的亚稳态原子寿命测量方法。     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

常压催化加氢合成邻氨基苯酚的研究

用硅溶胶改性的漆原镍催化剂，在常压液相催化条件下，氢化邻硝基苯酚制备邻氨基苯酚的反应过程，可分为诱导期、恒速吸氢阶段、吸氢衰减期３个反应阶段．恒速吸氢阶段的吸氢速率为５×１０２ｍｏｌ／（ｋｇ·ｍｉｎ）且与体系的温度无关，诱导期随温度的增加而变短，吸氢衰减期的长短随溶剂量的变化而变化．实验结果表明，邻氨基苯酚的收率在９５％左右．     

CoNiZ系列合金的结构和马氏体相变性质

利用X射线衍射研究了CoNiZ(Z=Si,Sb,Sn,Ga等)合金在不同热处理条件下的相组成.当Z元素为Sn,Sb时,材料是完全的B2结构;但Z为Si时,材料变成面心立方的γ相.形成B2还是γ相由电子浓度和原子尺寸效应两种因素共同决定.而CoNiGa的研究结果表明,在合金中除了形成B2结构的同时还容易形成γ相,常表现出两相共存的特性.对材料进行不同方式的热处理可以使合金中两相的含量有所消长,γ相含量的多少对CoNiGa合金的马氏体相变有很大的影响.分析指出,两相共存及其所带来的物性变化是CoNiGa铁磁性形状记忆合金非常有利用价值的物理性质.