Lewis acid-mediated selective chlorinations of silyl enolate

A new method involving efficient, widely applicable, and highly selective alpha-chlorination of simple silyl enolate with Lewis acid and an alpha,alpha-dichloro-1,3-dicarbonyl controller unit was reported. Diastereoselectivity and enantioselectivity of the reaction were investigated. High reactivity and selectivity were achieved by using alpha,alpha-dichlorinated malonic ester.     

Solvent Effects on the Absorption Spectrum of the Product and the Equilibrium Constant for the Proton Transfer Reaction from 1-Phenacylquinolinium Bromide to Amines

The equilibrium constants, K ₂, have been determined for the proton-transfer reactions of 1-phenacylquinolinium ion, PHQ⁺, with several amines {triethylamine (TEA), N,N,N′,N′-tetramethylethylenediamine (ED), N,N,N′, N′-tetramethylpropanediamine (PD), N,N,N′,N′-tetramethylbutanediamine (BD), and 1,8-bis(dimethylamino-naphthalene (DMAN)} in acetonitrile (AN), AN-tetrahydrofuran (THF) and AN-ethanol (EtOH) mixtures. The reaction was followed spectrophotometrically using a stopped-flow technique. The K ₂ value decreased for DMAN and increased for TEA with increasing vol-% of THF in AN-THF mixtures. The changes in the K ₂ value for ED, PD and BD changed in the order: ED, PD and BD from a pattern similar to TEA to a pattern similar to DMAN. The change in the K ₂ value for DMAN with increasing vol-% of THF in AN-THF mixtures was explained by the effect of polarity on the stability of P⁻Q⁺ (the deprotonated product of PHQ⁺). The effect of THF on the K ₂ value is consistent with that of the peak wavelength of the absorption spectrum of P⁻Q⁺. The change in the K ₂ value for TEA, ED, PD and BD depended on the structures of the protonated bases, one of the products for this reaction. The effect of EtOH on the K ₂ value for DMAN was examined in ternary EtOH-THF-AN mixtures that contain different amounts of EtOH and whose relative permittivities were adjusted to that of EtOH. The K ₂ value increased with increasing vol-% of EtOH because of the stabilization of P⁻Q⁺ upon the formation of the hydrogen-bonded complex with EtOH. The absorption spectrum of P⁻Q⁺ demonstrated a blue shift as the vol-% of EtOH increased.     

Ru(II)-catalyzed chemo- and regioselective cyclotrimerization of three unsymmetrical alkynes through boron temporary tether. One-pot four-component coupling via cyclotrimerization/Suzuki-Miyaura coupling

The Ru(II)-catalyzed [2+2+2] cyclotrimerization of alkynylboronates, propargyl alcohol, and terminal alkynes proceeded chemo- and regioselectively to give rise to arylboronates, which were subjected to Suzuki-Miyaura cross-coupling with aryliodides to afford highly substituted biaryls in 53-76% yields.     

Crystal structures of n-alkanes with branches of different size in the middle

We synthesized four branched n-alkane samples C35-C1, C35-C4, C35-C6, and C35-C4Ph with the same number of carbons as the main chain, n = 35, to which the methyl, butyl, hexyl, and butyl phenyl groups were respectively attached at the middle, and also the corresponding linear homologue of C35, and studied their crystalline structures from DSC, IR, and Raman spectroscopy, X-ray diffraction measurement, and computer simulation. Solid-solid phase transitions characteristic of linear alkane C35 are not observed for any branched alkanes, and their melting temperatures Tm are lowered to 325.2, 318.5, 314.3, and 314.1K, respectively. Main chains of branched alkane molecules are not folded, irrespective of length and chemical structure of branches, but are extended to take the planar zigzag form in the solid state. The branches of C35-C4 and C35-C6 are also aligned inside the crystal in the extended form. Data analyses on solution-grown crystallized samples reveal that, with increasing the branch length, their crystal structures transform from polymorphic forms of the orthorhombic (P2(1)2(1)2(1)) and the triclinic (P) for C35-C1 and C35-C4 to the unique triclinic form for C35-C6 and C35-C4Ph, so as to minimize extra surface energy invoked by introduction of long branches.     

Effect of titanium dioxide on photostability of solid-state mequitazine

TiO(2) has been widely used in pharmaceutical products, and it also has been used as a photocatalyst. In this study, the influence of photocatalytic activity on the stability of solid-state mequitazine, an H(1)-blocker, was investigated. The photo-degradation of mequitazine with TiO(2) occurred under irradiation with both light sources. The degree of degradation of mequitazine with anatase was higher than that of rutile. The degradation was significantly enhanced with increasing relative humidity. The relationship between the apparent degradation rate constant and water vapor pressure could be clearly described by a simple power law. The major photo-degradation products of mequitazine, resulting from photocatalytic activity of TiO(2), were mequitazine-S-oxide and mequitazine-sulphone. A remarkable degradation of mequitadine occurred with addition of TiO(2), and its photocatalytic activity was controlled by water vapor pressure. The photo-degradation of mequitazine with TiO(2) is a different process from mequitazine without TiO(2), because mequitazine-S-oxide and mequitazine-sulphone are not formed with normal photo-degradation of mequitazine.     

Diastereoselective inter- and intramolecular pinacol coupling of aldehydes promoted by monomeric titanocene(II) complex Cp(2)TiPh

A monomeric titanocene(III) derivative, Cp(2)TiPh, effectively promoted the pinacol coupling of both an aromatic aldehyde, benzaldehyde, and an aliphatic aldehyde, 3-phenylpropionaldehyde. The same reactive complex was successfully generated by a catalytic amount of a precursor, Cp(2)Ti(Ph)Cl, and its stoichiometric amount of Zn. The Cp(2)TiPh-catalyzed pinacol coupling of benzaldehyde derivatives and aliphatic aldehydes afforded the corresponding 1,2-diols in high yields with moderate to good threo-selectivity. On the other hand, Cp(2)TiPh-catalyzed pinacol cyclization of dials gave cyclic 1,2-diols with excellent diastereoselectivity. The extension of this protocol to chiral dials demonstrated that the phenyltitanium complex catalytically transmitted an axial chirality or a central chirality of the starting dials to the central chirality of the resultant 1,2-diols.     

Nuclear magnetic resonance study of exchanging systems : The line shape analysis of the inversion of 9,10-dihydro-4,5-dimethylphenanthrene by the density matrix method

9,10-Dihydro-4,5-dimethylphenanthrene has two rotational isomers around the pivot bond. This compound shows a complex signal pattern of an AA′BB′ type for the four methylene protons in the NMR spectrum. The inversion process is analysed using the density matrix method, and at various temperatures the calculated line shapes are fitted to the observed spectra to obtain the life-time τ of the inversion. From the logarithmic plot of the life time versus 1/T, the kinetic parameters of this intramolecular inversion process are obtained as follows: E_a = 25·3 ± 1·0 Kcal/mole ΔG3 = 24°1 ± 1·0 Kcal/mole at 25·0° ΔH3 = 24·7 ± 1·0 Kcal/mole ΔS3 = 2·1 ± 0·8 e.u.     

Use of transition elements to enhance sensitivity for selenium determination by graphite-furnace atomic-absorption spectrophotometry combined with solvent extraction with the APDC-MIBK system

A microanalytical method for the measurement of selenium in waters and biological materials by a flameless atomic-absorption technique has been developed. The ammonium pyrrolidinedithiocarbamate-methyl isobutyl ketone extraction system is used for separation from interfering materials such as large amounts of alkali and alkaline earth metal salts and mineral acids. The atomic-absorption sensitivity for selenium is found to be enhanced to a large extent by co-extraction of some transition metal ions. Copper(II) has been used successfully as such an additive to diminish the volatility of selenium in the graphite furnace during the ashing step of the atomization cycle. When the aqueous phase/organic solvent volume ratio is 5 and the volume injected into the graphite furnace is 20 mul, the sensitivity for selenium is 0.3 ng/ml for 1% absorption. The relative standard deviation is ca. 2%. Interference by other metal ions is prevented by masking with EDTA. The method has been applied satisfactorily for the determination of minute amounts of selenium in waters and various biological materials.     

Radioisotopes of thirteen elements in intertidal coastal and estuarine sediments in the Irish Sea

A survey has been carried out of⁴⁰K,⁶⁰Co,⁹⁹Tc,¹⁰⁶Ru,¹²⁵Sb,¹²⁹I,¹³⁴Cs,¹³⁷Cs,¹⁵⁴Eu,²²⁶Ra,²²⁸Ra,²³⁷Np,²³⁸Pu,^239,240Pu,²⁴¹Pu,²⁴¹Am,²⁴²Cm, and^243,244Cm activities in sediments from the Irish Sea. Several of these radionuclides were measured independently at two separate laboratories to enable the intercomparison of the results produced. The comprehensive data set generated allows the present spatial distributions of these radionuclides in coastal sediments to be examined in relation to sediment textural characteristics and by comparison with earlier survey, enables the temporal trends in their activities to be determined. In general all artificial radionuclides showed lower activities in sediments in response to falling discharges from Sellafield and relationships with either grain size, distance from Sellafield or both. Isotope ratios were similar to cumulative weighted activity ratios rather than present day values due to sediment mixing. Pu levels supplied evidence for the lag in response of sediment deposits with increasing distance from Sellafield due to sediment transport.     

Determination of environmental actinide nuclides and210Pb(210Po) by low-energy photon spectrometry with alpha-spectrometry

Low-energy photon spectrometry with -spectrometry was used to determine the environmental concentrations of low-level actinides and other nuclides, especially²¹⁰Pb and²¹⁰Po. The isotopic ratio of²⁴⁰Pu/²³⁹Pu was successfully determined by measuring L_x-ray/-ray counting ratio. A reliable method has been developed for the determination of extremely low-level²³⁷Np global fallout in environmental samples. The non-destructive determination by Ge-LEPS for natural²¹⁰Pb in various samples (tobacco leaves, commercially available tobacco, etc.) was also carried out with the determination of²¹⁰Po by -spectrometry using²⁰⁹Po as a yield tracer.