The effect of PVC on thermal and catalytic degradation of polyethylene, polypropylene and polystyrene by a continuous flow reactor

A continuous flow reactor was operated at atmospheric pressure and feed rate of 0–1.5 kg h⁻¹ for degradation of PE, PP and PS in presence of 1–2 wt% PVC. The degradation temperatures were between 360 and 440 °C depending on the feeding material. The influence of PVC, temperature and silica-alumina catalysts on degradation behavior and on the properties of the products was studied and discussed. Different effects were observed for binary PE/PVC, PP/PVC, PS/PVC and complex PE/PP/PS/PVC mixtures due to specific interactions between PVC and each hydrocarbon polyolefin. Silica-alumina catalysts decreased the Cl concentration in oils but it seems to generate high amounts of Cl-containing organic compounds in gases.     

2,6-Bis(porphyrin)-substituted pyrazine: a new class of supramolecular synthon binding to a transition-metal ion and fullerene (C60)

2,6-Disubstituted-3,5-dimethylpyrazines have been synthesized via biased acetal synthesis from symmetric 2,3,5,6-tetrakis(chloromethyl)pyrazine. The pyrazine ligands coordinated to trans-dichloropalladium(II) at the nitrogen whose neighboring carbons were connected to less hindered methyl groups. 2,6-Bis(porphyrin)-substituted pyrazine bound C₆₀ to yield 1:1 inclusion complex. The binding of C₆₀ with the pyrazine ligand and its zinc complex was determined by ESI-MS, NMR, and fluorescence spectroscopic analyses.     

On extensions of some Flugede–Putnam type theorems involving (p,k)‐quasihyponormal,spectral, and dominant operators

A Hilbert space operator S is called (p, k)‐quasihyponormal if S *^k ((S *S)^p – (SS *)^p )S^k ≥ 0 for an integer k ≥ 1 and 0 < p ≤ 1. In the present note, we consider (p, k)‐quasihyponormal operator S ∈ B (H) such that SX = XT for some X ∈ B (K,H) and prove the Fuglede–Putnam type theorems when the adjoint of T ∈ B (K) is either (p, k)‐quasihyponormal or dominant or a spectral operator (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of Flow Structures on Turbulence Statistics of Taylor-Couette Flow in the Torque Transition State

Direct numerical simulations of Taylor-Couette flow from Re= 8000 to 25000 have been conducted to investigate changes of turbulence statistics in the transition of the Reynolds number dependency of the mean torque near Re= 10000. The velocity fluctuations are decomposed into the contributions of the Taylor vortex and remaining turbulent fluctuations. Significant Reynolds number dependencies of these components are observed in the radial profiles of the Reynolds stress and the transmission of the mean torque. The contributions of Taylor vortex and turbulent components in the net amount of mean torque are evaluated. The Taylor vortex component is overtaken by the turbulent counterpart around Re= 15000 when they are defined as the azimuthally averaged component and the remnants. The results show that the torque transition can be explained by the competition between the contributions of azimuthally averaged Taylor vortex and the remaining turbulent components.     

Mechanism underlying bioinertness of self-assembled monolayers of oligo(ethyleneglycol)-terminated alkanethiols on gold: protein adsorption, platelet adhesion, and surface forces

The mechanism underlying the bioinertness of the self-assembled monolayers of oligo(ethylene glycol)-terminated alkanethiol (OEG-SAM) was investigated with protein adsorption experiments, platelet adhesion tests, and surface force measurements with an atomic force microscope (AFM). In this work, we performed systematic analysis with SAMs having various terminal groups (-OEG, -OH, -COOH, -NH(2), and -CH(3)). The results of the protein adsorption experiment by the quartz crystal microbalance (QCM) method suggested that having one EG unit and the neutrality of total charges of the terminal groups are essential for protein-resistance. In particular, QCM with energy dissipation analyses indicated that proteins absorb onto the OEG-SAM via a very weak interaction compared with other SAMs. Contrary to the protein resistance, at least three EG units as well as the charge neutrality of the SAM are found to be required for anti-platelet adhesion. When the identical SAMs were formed on both AFM probe and substrate, our force measurements revealed that only the OEG-SAMs possessing more than two EG units showed strong repulsion in the range of 4 to 6 nm. In addition, we found that the SAMs with other terminal groups did not exhibit such repulsion. The repulsion between OEG-SAMs was always observed independent of solution conditions [NaCl concentration (between 0 and 1 M) and pH (between 3 and 11)] and was not observed in solution mixed with ethanol, which disrupts the three-dimensional network of the water molecules. We therefore concluded that the repulsion originated from structured interfacial water molecules. Considering the correlation between the above results, we propose that the layer of the structured interfacial water with a thickness of 2 to 3 nm (half of the range of the repulsion observed in the surface force measurements) plays an important role in deterring proteins and platelets from adsorption or adhesion.     

根霉胞外羧甲基纤维素酶和β－葡糖苷酶的纯化研究

采用柱层析等步骤纯化了根霉Ｇ７的羧甲基纤维素酶及β－葡糖苷酶，回收率分别为４．５％和１９．６％．二种酶的最适酶反应温度都为５５°Ｃ，并都能在较大ｐＨ范围内保持稳定，其中羧甲基纤维素酶具有很高的耐热性，在１００°Ｃ水浴中保持１ｈ也仍可检测出约２０％的酶活性，最适反应ｐＨ为７．０～７．５；而β－葡糖苷酶的热稳性较差，其最适反应ｐＨ为５．０．该两种酶的分子量分别为２．５×１０４和９．５×１０４，而Ｋｍ值则分别为７．４０ｍｇｍＬ－１和０．２１３ｍｇｍＬ－１．     

Oxygen ion conductivity of yttria-niobia mixed oxide with fluoride related structure

The oxygen ion conductivity of Y₂O₃---Nb₂O₅ with a fluorite-like structure was studied. Substitutional solid solutions of Nb₂ O₅ in Y₂O₃ lattice formed the defect fluorite phase and remarkably enhanced the oxygen ion conductivity. Doping with tetravalent cations, especially Ti⁴⁺ or Ce⁴⁺, in yttria-niobia oxide is effective in enhancing the oxygen ion conductivity. Although the n-type semiconducting property appeared below P_O2 = 10⁻¹⁸ atm at 1243 K, the yttria-niobia mixed oxide doped with Ce⁴⁺, Ti⁴⁺, and Zr⁴⁺ stably exhibited oxygen-ion conduction in the wide range of oxygen partial pressures studied.     

Syntheses, structures and photochromism of two novel copper(II) complexes with 1,2-bis(2′-methyl-5′-(2″-pyridyl)-3′-thienyl)perfluorocyclopentene

Two novel Cu(II) complexes with 1,2-bis(2′-methyl-5′-(2″-pyridyl)-3′-thienyl)perfluorocyclopentene (BM-2-PTP) or its closed-form (closed-BM-2-PTP) were synthesized and characterized by X-ray crystallographic analysis. Both complexes are tetra-coordinated to two N atoms from distinct ligands and two Cl atoms from anions, forming 1-D polymeric structures. [Cu(BM-2-PTP)Cl₂] (1) showed typical spectral changes as analogous Ag(I) complexes with the same ligand upon appropriate light stimulus. However, closed-BM-2-PTP displayed different photocyclization from its open-ring form upon irradiation with UV light, indicating the photogenerated closed form turned into two kinds of closed-ring isomers. Furthermore, [Cu(closed-BM-2-PTP)Cl₂] (2) was revealed to contain two conformers by X-ray crystallographic analysis and displayed similarities in photocyclization to its free ligand. The distinct absorptions of the UV spectrum were attributed to the coexistence of two conformers in complex 2, both of which showed effective photoreactivities in the crystalline phase. The photochromic mechanism of complex 2 is tentatively concluded as two conformers displaying independent photoreactions.     

Catalytic degradation of polyolefins over hexagonal mesoporous silica: Effect of aluminum addition

Degradations of polypropylene (PP) and polyethylene (PE) over pure hexagonal mesoporous silica and aluminum-containing hexagonal mesoporous silica catalysts were studied in a fixed bed catalytic reactor at 380 and 430 °C, respectively. The thermal and catalytic degradations of both PP and PE in liquid-phase-contact and vapor-phase-contact modes over pure hexagonal mesoporous silica had no significant effect on the product yields. The liquid products were widely distributed in hydrocarbons with boiling point ranges of 36–405 °C. By adding a small amount of aluminum to the hexagonal mesoporous material, aluminium-containing hexagonal mesoporous silica exhibited good performance in cracking heavy molecular weight hydrocarbons into light hydrocarbons. High liquid yields and less coke deposits were obtained in liquid-phase-contact reaction with increasing aluminum content. The liquid products were mainly composed of C₅–C₁₀ hydrocarbons with boiling points of 36–174 °C, and propene, butene, and butane were main components in gaseous products. The effect of degradation temperature was not observed on product yields though degradation rate of polyolefin into liquid products was faster. Conversely, in vapor-phase-contact reaction, an increase in gaseous yield was observed when increasing the amount of aluminum and temperature of the cracking reactor, while the residue yield remained constant.