Luminance and Chromaticity Conditions of a Bichromatic Cross Pattern for Chromatically-Uniform Transparency

We can perceive a surface through another surface. This perception is called transparency. It is known that transparency can be perceived even if the stimulus conditions are not consistent with physical conditions for a real transparent surface. In this study, we measured the ranges of luminance and chromaticity of the overlapping area of two crossed layers at which a surface was perceived as chromatically-uniform transparent. As the results, the luminance range of the overlapping area existed around or near the luminance of the inducing area. The upper and lower limits of the luminance range were higher for the dark background than for the light background. Moreover, the chromatic range existed around the additive colormixture line between two chromaticities of the inducing areas for both dark and light backgrounds. This indicates that the perceptual transparency mechanism would divide the color of an additive color mixture into the original colors that exist in the inducing areas. We noticed that the perceptual appearance of the stimulus changed greatly depending on the luminances of the overlapping area and the background. These differences in perceptual appearance would be a factor explaining individual difference and deciding the luminance conditions for transparency.     

Stereoselective synthesis of trans olefins by the reaction of Wittig reagents with selenium. Formation of selenocarbonyl compounds.

Wittig reagents were successfully changed to symmetrical olefins when treated with elemental selenium. The reaction proceeds through a selenocarbonyl intermediate, which existence was confirmed by Diels-Alder reaction.     

Cobalt-catalyzed regioselective [3+2] annulation of ortho-formyl and acetyl substituted phenylboronic acids with alkynes

Treatment of alkynes with ortho-formyl and acetyl phenylboronic acids in the presence of a cobalt catalyst resulted in the formation of 2,3-disubstituted indenols in good yields. When aryl silyl alkynes were used, 2-aryl-3-silyl indenols were obtained regioselectively in good yields.     

Morphological change of crystalline polymer films by annealing: substrate‐ and heating/cooling‐rate‐dependent surface roughness

We study the morphological change of crystalline polymer films by annealing using atomic force microscope, X‐ray diffraction, and Fourier transform infrared spectroscopy techniques. As typical samples, we employ high‐density and low‐density polyethylene films prepared by the cast method. After annealing at 135 °C for 4 h, the surface roughness of polyethylene films by the atomic force microscope significantly increases, and the crystallite size by the X‐ray diffraction also shows some increase, while the Fourier transform infrared spectroscopy spectrum hardly exhibits any change. This can be well explained as a result of the growth of crystal structure by recrystallization during annealing. More interestingly, we find that the choice of the substrate and also the heating/cooling rates for annealing significantly influences the surface roughness of the films. Copyright © 2017 John Wiley & Sons, Ltd.     

Hydrogen bond network-stabilisation of blue phases by addition of a chiral N-(10-hydroxydecyl)succinimide derivative and alkane diols

Blue phases (BPs) obtained by doping a commercially available liquid crystalline compound (4-butyl-N-(4-ethoxybenzylidene)aniline (EBBA)) with (2R,3R)-2,3-bis(4-octyloxyphenylbenzoyloxy)-N-(hydroxydecyl)succinimide (1) were highly stabilised by the addition of a small amount of alkane diols. Especially, addition of only 0.5 mol% of octane-1,8-diol increased the BP–Iso transition temperature by 10 K and widened the BP temperature range up to 35 K. A model stabilisation mechanism based on the construction of a hydrogen bond network in each disclination zone in BPs was proposed.     

Ionic liquid salt bridge based on tributyl(2-methoxyethyl)phosphonium bis(pentafluoroethanesulfonyl)amide for stable liquid junction potentials in highly diluted aqueous electrolyte solutions

A moderately hydrophobic ionic liquid, tributyl(2-methoxyethyl)phosphonium bis(pentafluoroethanesulfonyl)amide ([TBMOEP⁺][C₂C₂N⁻]), shows a very stable liquid junction potential upon contact with an aqueous solution whose ionic strength is as low as 1 μmol dm⁻³. The stability with the maximum excursion of the potential within ±0.5 mV for 30 min is very promising for accurate determination of pH and other single ion activities potentiometrically.     

Biobased myo-inositol as nucleator and stabilizer for poly(lactic acid)

myo-Inositol made from a biomass feedstock was used as an additive for poly (l-lactic acid) (PLLA) which was also made from biomass feedstock. The crystallization and stabilization of PLLA by the addition of myo-inositol were evaluated by the melt injection molding process. While the isothermal crystallization of PLLA at 100 °C had finished over 14 min after melting, that of PLLA with 5 wt% myo-inositol finished within 2 min. The crystal growth of PLLA started when the myo-Inositol crystal was added, and the crystallization was promoted. Furthermore, the molecular weight of PLLA with myo-inositol did not decrease during the melt-mixed at 200 °C, different from that of PLLA without the myo-inositol. myo-Inositol prevented the degradation of PLLA during the thermal melting process. The biomass carbon ratio measured by the accelerator mass spectroscopy method showed that the PLLA with 5 wt% myo-inositol was a fully biobased material. It was demonstrated that myo-inositol was a multi-functional biobased additive for the modification of PLLA without decreasing its mechanical properties.     

Generation and development of RNA ligase ribozymes with modular architecture through "design and selection"

In vitro selection with long random RNA libraries has been used as a powerful method to generate novel functional RNAs, although it often requires laborious structural analysis of isolated RNA molecules. Rational RNA design is an attractive alternative to avoid this laborious step, but rational design of catalytic modules is still a challenging task. A hybrid strategy of in vitro selection and rational design has been proposed. With this strategy termed "design and selection," new ribozymes can be generated through installation of catalytic modules onto RNA scaffolds with defined 3D structures. This approach, the concept of which was inspired by the modular architecture of naturally occurring ribozymes, allows prediction of the overall architectures of the resulting ribozymes, and the structural modularity of the resulting ribozymes allows modification of their structures and functions. In this review, we summarize the design, generation, properties, and engineering of four classes of ligase ribozyme generated by design and selection.     

Test compounds for detecting the silanol effect on the elution of ionized amines in reversed‐phase LC

The effectiveness of several basic compounds for testing silica‐based stationary phases was reviewed by applying them to recent columns for reversed‐phase HPLC. Most octadecylsilylated (C18) stationary phases, prepared as a base‐deactivated material from high‐purity silica gel with endcapping, provided excellent peak shape and column efficiency for the bases including benzylamine and amitriptyline that once caused problems and were subsequently employed for testing silanol activities. However, a cyclic tertiary amine, dextrometorphan, was eluted as an acceptable peak from only a few columns at neutral pH. Such a more sensitive probe is expected to contribute to further improvement of the stationary phase for reversed‐phase HPLC.     

Mechanism of the decrease in catalytic activity of human cytochrome P450 2C9 polymorphic variants investigated by computational analysis

Cytochrome P450 (CYP) is deeply involved in the metabolism of chemicals including pharmaceuticals. Therefore, polymorphisms of this enzyme have been widely studied to avoid unfavorable side effects of drugs in chemotherapy. In this work, we performed computational analysis of the mechanism of the decrease in enzymatic activity for three typical polymorphisms in CYP 2C9 species: *2, *3, and *5. Based on the equilibrated structure obtained by molecular dynamics simulation, the volume of the binding pocket and the fluctuation of amino residues responsible for substrate holding were compared between the wild type and the three variants. Further docking simulation was carried out to evaluate the appropriateness of the binding pocket to accommodate substrate chemicals. Every polymorphic variant was suggested to be inferior to the wild type in enzymatic ability from the structural viewpoint. F‐G helices were obviously displaced outward in CYP2C9*2. Expansion of the binding pocket, especially the space near F′ helix, was remarkable in CYP2C9*3. Disappearance of the hydrogen bond between K helix and β4 loop was observed in CYP2C9*5. The reduction of catalytic activity of those variants can be explained from the deformation of the binding pocket and the consequent change in binding mode of substrate chemicals. The computational approach is effective for predicting the enzymatic activity of polymorphic variants of CYP. This prediction will be helpful for advanced drug design because calculations forecast unexpected change in drug efficacy for individuals. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010