Residual stress and deformation during rapid cooling process in an epoxy plate

Residual stress in the epoxy plate during a rapid cooling process was measured by the layer removal method and calculated by the linear thermoviscoelastic theory considering specific volume relaxation. The relaxations of the tensile modulus and specific volume were measured by an Instron thermomechanical analyzer. When the starting temperature of the cooling process was near the glass transition temperature of the cured epoxy, the residual stress in the epoxy plate was smaller than when the starting temperature was higher than the glass transition temperature. However, the transient stress in the cured epoxy plate was higher when the starting temperature was near the glass transition temperature than when the starting temperature was higher than the glass transition temperature. The quenched epoxy plate was compressed in the direction parallel to the surface and expanded in the thickness direction.     

Stereochemistry and dynamic behavior of some synthetic “angular” profisetinidin tetraflavanoid derivatives

The structure and stereochemistry of four synthetic “angular” tetraflavanoid-condensed tannin derivatives are examined by high-resolution variable temperature ¹H NMR. spectroscopy, and hence correlated with their dynamic behavior. Three “angular” oligomers exist as stable rotational isomers at ambient temperatures, thus contrasting with the mobility about their interflavanoid bonds of most natural profisetinidin “trimeric” and “tetrameric” homologs. A “linear” tetraflavanoid analog results from one of these regioselectively controlled condensations.     

The chemical behaviour of cobalt-stabilized carbenes having a trisubstituted silyl or germyl ligand. Stereospecific formation of benzoylsilanes from the reaction of organosilyl-cobalt tetracarbonyl derivatives with phenyllithium

We report the chemical behavior of cobalt-stabilized carbenes, R₃M(CO)₃CoC(OEt)R′, and their parent anions, R₃M(CO)₃CoC(O^?)R′, where M = Si or Ge. The anions where M = Si, R′ = Ph decompose thermally into the corresponding benzoylsilanes; when the silicon atom is chiral (R₃ = MePh-1-Np) optically active R₃SiCOPh is obtained with complete retention of configuration.     

XPS analysis of the effect of Pt addition to Pd catalysts for complete benzene oxidation

Pt-Pd bimetallic catalysts were prepared in order to develop and investigate catalysts having excellent activity and stability for benzene destruction. The effect of Pt addition to Pd catalysts is studied by XPS analysis. This revised version was published online in August 2006 with corrections to the Cover Date.     

焦脱镁叶绿酸的Knoevenagel反应及其杂环取代衍生物的合成

以焦脱镁叶绿酸-d甲酯(MPPd)为起始原料, 通过其醛基与连有五元杂环的β-二酮、α-氰基酮和丙二腈的活性亚甲基进行Knoevenagel反应, 完成3-位五元杂环取代的焦脱镁叶绿酸-a甲酯衍生物. 所合成的新化合物均经UV, IR, ¹H NMR及元素分析证明其结构.     

Anthocyanins protect against A2E photooxidation and membrane permeabilization in retinal pigment epithelial cells

The pyridinium bisretinoid A2E, an autofluorescent pigment that accumulates in retinal pigment epithelial cells with age and in some retinal disorders, can mediate a detergent-like perturbation of cell membranes and light-induced damage to the cell. The photodynamic events initiated by the sensitization of A2E include the generation of singlet oxygen and the oxidation of A2E at carbon-carbon double bonds. To assess the ability of plant-derived anthocyanins to modulate adverse effects of A2E accumulation on retinal pigment epithelium (RPE) cells, these flavylium salts were isolated from extracts of bilberry. Nine anthocyanin fractions reflecting monoglycosides of delphinidin, cyanidin, petunidin and malvidin were obtained and all were shown to suppress the photooxidation of A2E at least in part by quenching singlet oxygen. The anthocyanins tested exhibited antioxidant activity of variable efficiency. The structural characteristics relevant to this variability likely included the ability to form a stable quinonoidal anhydro base at neutral pH, a conjugated diene structure in the C (pyrane) ring, the presence of hydroxyl groups on the B (benzene) ring and the relative hydrophobicity conferred by the arrangement of substituents on the B ring. Cells that had taken up anthocyanins also exhibited a resistance to the membrane permeabilization that occurs as a result of the detergent-like action of A2E.     

Solid-Phase Synthesis of Phenylacetylene Oligomers Utilizing a Novel 3-Propyl-3-(benzyl-supported) Triazene Linkage

Sequence-specific phenylacetylene oligomers consisting of functionalized monomers (hexyl benzoate, hexyl phenyl ether, benzonitrile, and tert-butylphenyl) are synthesized in gram quantities using solid-phase methods. Growing oligomers are attached to a divinylbenzene cross-linked polystyrene support by the 1-aryl-3-propyl-3-(benzyl-supported) triazene moiety. This linkage is obtained by reaction of arenediazonium tetrafluoroborate salts with a n-propylamino-modified Merrifield resin. Condensation strategies are described, producing oligomers with higher yields and simplified procedures compared to solution-phase methods. Terminal acetylene is protected with a trimethylsilyl group. After deprotection of the resin-bound terminal acetylene, an aryl iodide monomer or an aryl iodide-terminated oligomer is coupled to the supported oligomer using a palladium(0) catalyst. The cycle can be repeated to produce sequence-specific oligomers of varying length and functionality. The resulting oligomers are liberated from the polymer support by cleavage of the 1-aryl-3-propyl-3-(benzyl-supported) triazene group by reaction with iodomethane producing an aryl iodide.     

Immobilized cobalt/rhodium heterobimetallic nanoparticle-catalyzed silylcarbocylization and carbonylative silylcarbocyclization of 1,6-enynes

Reaction of 1,6-enynes with a hydrosilane in the presence of immobilized cobalt/rhodium bimetallic nanoparticles gives 2-methyl-1-silylmethylidene-2-cyclopentanes in the absence of carbon monoxide and 2-formylmethyl-1-silylmethylidene-2-cyclopentanes under 1 atm of carbon monoxide, respectively. [reaction: see text]     

Preparation and characterization of self-assembled nanoparticles based on glycol chitosan bearing adriamycin

An anthracycline drug, adriamycin, was chemically conjugated onto the backbone of glycol chitosan via an acid-labile cis-aconityl linkage. The physicochemical characteristics of the glycol chitosan–adriamycin (GC–ADR) conjugates were investigated by dynamic light scattering, atomic force microscopy, and fluorescence spectroscopy. The GC–ADR conjugates were capable of forming nano-sized self-aggregates in an aqueous medium, when the adriamycin content in the conjugate was in the range of 2.0–5.0 wt.%. The self-aggregates were spherical in shape, and had mean diameters of 238–304 nm, depending on the adriamycin content. The critical aggregation concentrations of the conjugates, estimated by the fluorescence quenching method, were as low as 1.0–2.5×10⁻² mg/ml. The size of self-aggregates was not affected by the polymer concentration in the range from 50 to 2,000 μg/ml, and was maintained up to 8 days in phosphate-buffered saline (pH 7.4), indicating high colloidal stability. The release of adriamycin from self-aggregates was significantly dependent on the pH of the medium due to the cis-aconityl linkage; e.g., the amount of adriamycin released for 4 days was 7.3±0.3% at pH 7, whereas it was 29.3±1.9% at pH 4. The cell viability results demonstrated that free adriamycin shows more potent cytotoxicity than the conjugates, primarily attributed to the sustained release of adriamycin from self-aggregates. In conclusion, the self-aggregates, formed by GC–ADR conjugates, might be useful for the site-specific delivery of adriamycin in a sustained manner.