Solid‐Phase Combinatorial Synthesis and Biological Evaluation of Destruxin E Analogues

The solid‐phase combinatorial synthesis of cyclodepsipeptide destruxin E has been demonstrated. The combinatorial synthesis of cyclization precursors 8 was achieved by using a split and pool method on SynPhase Lanterns. The products were successfully macrolactonized in parallel in the solution phase by using 2‐methyl‐6‐nitrobenzoic anhydride and 4‐(dimethylamino)pyridine N‐oxide to afford macrolactones 9 , and the subsequent formation of an epoxide in the side chain gave 18 member destruxin E analogues 6 . Biological evaluation of analogues 6 indicated that the N‐MeAla residue was crucial to the induction of morphological changes in osteoclast‐like multinuclear cells (OCLs). Based on structure–activity relationships, azido‐containing analogues 15 were then designed for use as a molecular probe. The synthesis and biological evaluation of analogues 15 revealed that 15 b , in which the Ile residue was replaced with a Lys(N₃) residue, induced morphological changes in OCLs at a sufficient concentration, and modification around the Ile residue would be tolerated for attachment of a chemical tag toward the target identification of destruxin E ( 1 ).     

Scrambled Self‐Assembly of Bacteriochlorophylls c and e in Aqueous Triton X‐100 Micelles

Bacteriochlorophyll (BChl) e was coassembled with BChl c in Triton X‐100 micelles in aqueous solutions. The Q_y absorption bands of the coaggregates were positioned between those of aggregates consisting solely of BChl c or e. The electronic absorption spectra of the coaggregates could not be reproduced by linear combinations of the spectra of the aggregates consisting solely of each pigment, but they were in line with the simulated spectra for the self‐aggregates in which both BChls were randomly distributed. These suggest that BChls c and e are not spatially separated; they are homogenously distributed over the self‐aggregates to give electronic spectra that are different from those of the aggregate consisting solely of each pigment. Deaggregation of the scrambled self‐aggregates by excess Triton X‐100 did not produce any spectral components assigned to an aggregate consisting solely of either BChl c or e. Acid‐induced decomposition of the scrambled aggregates showed different kinetics from those of the aggregates consisting solely of each pigment. These also support the homogeneous distribution of BChls c and e in the scrambled self‐aggregates. These results will be useful to investigate the major light‐harvesting antenna systems of green photosynthetic bacteria that contain two kinds of chlorosomal BChls.     

Magnetic ordering of divalent europium in double perovskites Eu2LnTaO6 (Ln=rare earths): Magnetic interactions of Eu ions determined by magnetic susceptibility, specific heat, and Eu Mössbauer spectrum measurements

Structures and magnetic properties of double perovskite-type oxides Eu₂LnTaO₆ (Ln=Eu, Dy-Lu) were investigated. These compounds adopt a distorted double perovskite structure with space group P2₁/n. Magnetic susceptibility, specific heat, and ¹⁵¹Eu Mössbauer spectrum measurements show that the Eu²⁺ ions at the 12-coordinate sites of the perovskite structure are antiferromagnetically ordered at ∼4 K, and that Ln³⁺ ions at the 6-coordinate site are in the paramagnetic state down to 1.8 K.     

Mass balance method for purity assay of phthalic acid esters: development of primary reference materials as traceability sources in the Japan Calibration Service System

Purity assay of high-purity materials (HPMs) of phthalic acid esters (PAEs) was carried out by means of a mass balance method. In this method, chromatographic methods such as gas chromatography-flame ionization detector (GC-FID) and/or high-performance liquid chromatography (HPLC) in combination with other methods such as Karl-Fischer (KF) titration and vacuum evaporation (VE) were applied. The sum of the impurities estimated by these methods allowed the estimation of the purity of the main component by difference. Seven PAEs with varying side chain structures and levels of impurities were analysed on a systematic way in which impurities were classified into several groups in terms of their abundance, availability of qualitative information and availability of authentic compounds, etc. The absolute quantity of each impurity was determined by GC-FID and/or HPLC based on the calibration made by the authentic compounds of impurities whenever available. The purities in mass fraction of these PAEs were certified at the National Metrology Institute of Japan (NMIJ), and the PAEs were registered as primary reference materials playing an essential role in linking the metrological traceability of the Japan Calibration Service System (JCSS) to the International System of Units (SI).     

Activity of SiDbCl in the Electrooxidation of Ascorbic Acid,Dopamine, and Uric Acid

Selective electroanalytical responses for ascorbic acid, dopamine and uric acid at a carbon modified electrode based on 3‐n‐propyl‐1‐azonia‐4‐azabicyclo[2.2.2]octane silsesquioxane chloride (SiDbCl) is reported. The overlapped peaks observed at an unmodified electrode are resolved into three well defined voltammetric peaks allowing the simultaneous determination of the three species. Detection limits of 37, 0.3 and 0.1 μmo L⁻¹ of ascorbic acid, dopamine and uric acid, respectively, were calculated from calibration curves based on differential pulse voltammetric experiments performed in Britton ‐ Robinson buffer solution at pH 7.04.     

3]Rotaxane-based dinuclear palladium catalysts for ring-closure Mizoroki-Heck reaction

[3]Rotaxane containing two Pd centers in the cyclic compounds catalyzes a Mizoroki-Heck reaction of substrates with two iodophenyl groups with bisacrylate. Formation of the cyclic products is enhanced by the rotaxane catalyst more smoothly than Pd(OAc)(2).     

Structural study of a series of layered rare-earth hydroxide sulfates

We report structure analysis of a new family of rare-earth hydroxides Ln(2)(OH)(4)SO(4)·2H(2)O (Ln = Pr, Nd, Sm, Eu, Gd, Tb) from synchrotron X-ray and electron diffraction data. Rietveld profile analysis revealed that all members were isostructural and crystallized in a face-centered monoclinic system A2/m (No. 12), in which the monoclinic angles were approximately equal to the right angle, varying from 90.387(1)° for Pr sample to 90.0718(3)° for Tb sample. The structure consisted of LnO(9) polyhedra connected by μ(3)-hydroxyl groups and μ(2)-water molecules, forming a corrugated two-dimensional layer, which was pillared by bidentated sulfate ions. This series of compounds had a supercell a' = 2a, b' = 2b because of the local orientation ordering of SO(4)(2-). Structural features along the series, such as unit-cell parameters and average Ln-O distances, represented a progressive contraction associated with the shrinking radius of the lanthanide cations from Pr to Tb.     

Synthesis of bis(N-heterocyclic carbene) palladium complexes derived from (S,S)-1,2-bis(1-hydroxypropyl)benzene

New o-xylylene-linked bis(benzimidazolium) salts were synthesized in six-steps from C₂-symmetric chiral 1,4-diol, 1,2-bis(1-hydroxypropyl)benzene, as a starting material. The silver complex of bis(benzimidazol-2-ylidene) was obtained on treatment of bis(benzimidazolium) salt with silver oxide. The reaction of the silver bis-NHC with [PdCl₂(PhCN)₂] afforded the bis-NHC complex of palladium. The X-ray diffraction studies on Pd complexes revealed that these complexes have distorted square planar geometry around the Pd center coordinating the NHC ligand in mutually cis-position. The arene ring of o-xylylene unit hanged over the Pd center and thus these complexes showed C₁-symmetric structures. The variable temperature NMR spectroscopy revealed that these Pd complexes showed fluxional behavior between C₁- and C₂-symmetric structures in solution state.     

Characterization of a synthetic peroxodiiron(III) protein model complex by nuclear resonance vibrational spectroscopy

The vibrational spectrum of an η(1),η(1)-1,2-peroxodiiron(III) complex was measured by nuclear resonance vibrational spectroscopy and fit using an empirical force field analysis. Isotopic (18)O(2) labelling studies revealed a feature involving motion of the {Fe(2)(O(2))}(4+) core that was not previously observed by resonance Raman spectroscopy.     

Formation and dielectric properties of anodic oxide films on Zr–Al alloys

Zr–Al alloys containing up to 26 at.% aluminum, prepared by magnetron sputtering, have been anodized in 0.1 mol dm⁻³ ammonium pentaborate electrolyte, and the structure and dielectric properties of the resultant anodic oxide films have been examined by grazing incidence X-ray diffraction, transmission electron microscopy, Rutherford backscattering spectroscopy, and AC impedance spectroscopy. The anodic oxide film formed on zirconium consists of monoclinic and tetragonal ZrO₂ with the former being a major phase. Two-layered anodic oxide films, comprising an outer thin amorphous layer and an inner main layer of crystalline tetragonal ZrO₂ phase, are formed on the Zr–Al alloys containing 5 to 16 at.% aluminum. Further increase in the aluminum content to 26 at.% results in the formation of amorphous oxide layer throughout the thickness. The anodic oxide films become thin with increasing aluminum content, while the relative permittivity of anodic oxide shows a maximum at the aluminum content of 11 at.%. Due to major contribution of permittivity enhancement, the maximum capacitance of the anodic oxide films is obtained on the Zr–11 at.% Al alloy, being 1.7 times than on zirconium at the formation voltage of 100 V.