对位叠式循环方波伏安法：Ⅰ.简单可逆电极体系

本文提出叠式循环方波伏安法和对位叠式循环方波伏安法，对简单可逆电极体系的理论作了推导和验证，经对各种电流的比较，发位叠式循环方波伏安法有较多的优点。较之其它方波伏安法灵敏。     

Development of methods for determination of the residues of 15 pesticides in medicinal herbs Isatis indigotica Fort. by capillary gas chromatography with electron capture or flame photometric detection

Two multiresidue methods were developed for the determination of 15 pesticides (organochlorines, organphosphorus compounds, pyrethroids, and fungicides) in medicinal herbs Isatis indigotica Fort. and its formulations. The analytical procedure is based on ultrasonic assisted extraction and liquid-liquid extraction (LLE). After solvents were added, the raw material or granule sample was sonicated in an ultrasonic water bath and then centrifuged, filtered, and cleaned up by LLE. The infusion sample was extracted with petroleum ether by LLE. The pesticide residues were determined by capillary gas chromatography with electron-capture or flame photometric detection. Recoveries with the method at concentrations between 0.4 microg/kg and 10 mg/kg ranged from 70.2 to 119.5% for raw material, 73.2 to 105.1% for granule formulation, and 72.8 to 113.3% for infusion formulation. The relative standard deviation values were <20% for all of the pesticides studied. The pesticide detection limits were within the ranges 0.3-0.5 microg/L for endosulfan, 3-7.5 microg/L for pyrethroids, 0.7-32.5 microg/L for organophosphorus pesticides, and 0.1-0.6 microg/L for the other pesticides. The proposed methods are simple and rapid and provide simultaneous determination of pesticide residues in Isatis indigotica Fort. with acceptable recoveries and repeatability and an adequate limit of determination.     

Reactivity of Dinuclear Copper(II) Complexes with N‐Salicylidene Glycine Schiff Bases as Carboxylesterase Models

Two phenoxo‐bridged dinuclear copper(II) complexes (Cu₂L¹₂, Cu₂L²₂) with N ‐salicylidene glycine Schiff bases were prepared and evaluated their performance for catalyzing the hydrolysis of p‐nitrophenyl picolinate (PNPP). The observations reveal that the as‐prepared dinuclear copper(II) complexes exhibited better activity by two to three orders of magnitude rate enhancement in comparison with the autohydrolysis rate of PNPP. Chloro‐containing Cu₂L²₂ aroused approximately three times kinetic advantage over chloro‐free Cu₂L¹₂ at pH 7.0, which is probably contributed to the electron‐withdrawing inductive effect of the 5^′‐chloride group. Moreover, it was found that the pH‐responded kinetic behavior displayed an enzyme‐like property for the PNPP hydrolysis by the two complexes.     

Preparation and hydrogen storage properties of zeolite-templated carbon materials nanocast via chemical vapor deposition: effect of the zeolite template and nitrogen doping

Carbon materials have been prepared using zeolite 13X or zeolite Y as template and acetonitrile or ethylene as carbon source via chemical vapor deposition (CVD) at 550-1000 degrees C. Materials obtained from acetonitrile at 750-850 degrees C (zeolite 13X) or 750-900 degrees C (zeolite Y) have high surface area (1170-1920 m(2)/g), high pore volume (0.75-1.4 cm(3) g(-1)), and exhibit some structural ordering replicated from the zeolite templates. Templating with zeolite Y generally results in materials with higher surface area. High CVD temperature (> or =900 degrees C) results in low surface area materials that have significant proportions of graphitic carbon and no zeolite-type structural ordering. The nitrogen content of the samples derived from acetonitrile varies between 5 and 8 wt %. When ethylene is used as a carbon precursor, high surface area (800-1300 m(2)/g) materials are only obtained at lower CVD temperature (550-750 degrees C). The ethylene-derived carbons retain some zeolite-type pore channel ordering but also exhibit significant levels of graphitization even at low CVD temperature. In general, the carbon materials retain the particle morphology of the zeolite templates, with solid-core particles obtained at 750-850 degrees C while hollow shells are generated at higher CVD temperature (> or =900 degrees C). We observed hydrogen uptake of up to 4.5 wt % and 45 g H(2)/L (volumetric density) at -196 degrees C and 20 bar for the carbon materials. The hydrogen uptake was found to be dependent on surface area and was therefore influenced by the choice of zeolite template and carbon source. Zeolite Y-templated N-doped carbons had the highest hydrogen uptake capacity. Gravimetric and volumetric methods gave similar uptake capacity at 1 bar (i.e., 1.6 and 2.0 wt % for zeolite 13X and Y-templated N-doped carbons, respectively). Our findings show that zeolite-templated carbons are attractive for hydrogen storage and highlight the potential benefits of functionalization (nitrogen-doping).     

Matrix solid-phase dispersion microextraction and determination of pesticide residues in medicinal herbs by gas chromatography with a nitrogen-phosphorus detector

A gas chromatography method for the determination of residues of 6 pesticides in Isatis indigotica Fort and Paeonia lactiflora Pall is described. Optimizations of different parameters were performed. The method used 0.5 g herb sample, silica gel as the matrix solid-phase dispersion sorbent, and acetone as the eluting solvent. Recoveries at spiked concentrations between 0.1 and 5 mg/kg were between 80.63 and 110.12%, with relative standard deviations ranging from 0.43 to 17.67%. The limits of quantitation were 0.01 mg/kg for metalaxyl, triadimefon, and paclobutrazol and 0.05 mg/kg for vinclozolin, tebuconazole, and fenarimol. The method may be useful as a screening protocol for the determination of these pesticides in medicinal herb samples.     

含氮碱性树脂催化二氧化碳与环氧乙烷反应研究

考察了二氧化碳与环氧乙烷的催化反应条件，研究了六种树脂对二氧化碳与环氧乙烷生成碳酸乙烯酯的催化活性。     

High-Performance Thin-Layer Chromatographic (HPTLC) Assessment of the Photodegradation of Bensulfuron-Methyl on Silica Gel

JPC – Journal of Planar Chromatography – Modern TLC - A quantitative instrumental high-performance thin-layer chromatographic (HPTLC) method has been developed for assessment of the...     

Eigenvalue and Eigenfunction of n-Mode Boson Quadratic Hamiltonian

By means of the linear quantum transformation (LQT) theory, a concisediagonalization approach for then-mode boson quadratic Hamiltonian is given,and a general method to calculate the wave function is proposed.     

CuO nanoparticles supported on nitrogen and sulfur co-doped graphene nanocomposites for non-enzymatic glucose sensing

Developing highly active catalysts to promote the electrocatalytic glucose oxidation (EGO) is a crucial demand for non-enzymatic glucose sensing. Herein, we reported the use of nitrogen and sulfur co-doped graphene (NSG) as a novel support material for anchoring CuO nanoparticles and obtained CuO/NSG was employed as an efficient EGO catalyst for non-enzymatic glucose sensing. The results showed that the NSG endowed the CuO/NSG with large surface area, increased structural defects, improved conductivity, and strong covalent coupling between NSG and CuO. Owing to the significant contribution of NSG and the synergistic effect of NSG and CuO, the CuO/NSG exhibited a remarkably higher EGO activity than CuO and CuO/reduced graphene oxide. The CuO/NSG-based sensor displayed excellent glucose sensing performances with a considerably low detection limit of 0.07 μM. These findings elucidate that the NSG is a promising support material for non-enzymatic glucose detection.     

Electrochemical extraction of ytterbium from LiCl–KCl-YbCl3-ZnCl2 melt by forming Zn–Yb alloys

Journal of Solid State Electrochemistry - The electrochemical behavior of Yb(III) was studied at a W electrode in LiCl–KCl–ZnCl2 molten salt system. Cyclic voltammetry, square wave...