Synthesis of oligomeric poly[(1, 2-propanediamine)-alt-(oxalic acid)] and anomalous proton conductivities of the thin films

New proton-conductive polyamide oligomers, oligomeric poly[(1, 2-propanediamine)-alt-(oxalic acid)], were synthesized to investigate the proton transport properties of bulk and thin films. The obtained oligomers were characterized by the X-ray diffraction, FT-IR spectra, ¹H NMR, Matrix Assisted Laser Desorption/Ionization Time of Flight (MALDI-TOF) mass spectrum, and electrical conductivity measurements. The bulk proton conductivity is 3.0 × 10^? 4 S cm^? 1 at the relative humidity (RH) of 80%. The proton conductivity of thin film is relatively higher than that of bulk sample. Thickness dependence of the proton conductivity was observed in these thin films. The maximum proton conductivity of the thin film is 4.0 × 10^? 3 S cm^? 1 at the relative humidity (RH) of 80%, which is higher one order magnitude than that of the bulk sample. The activation energies of bulk and 200 nm thick film are 1.0 and 0.69 eV at the RH of 60%, respectively.     

Antibacterial metal implant with a TiO2‐conferred photocatalytic bactericidal effect against Staphylococcus aureus

Photocatalysis with anatase Titanium dioxide (TiO₂) under ultraviolet A (UVA) has a well recognized bactericidal effect. There have been a few reports, however, on the effects of photocatalysis on bio‐implant‐related infections. The purpose of present study was to evaluate the photocatalytic bactericidal effects of anatase TiO₂ on Staphylococcus aureus (S. aureus) associated with surgical site infections. TiO₂ films were synthesized on commercially pure titanium substrates and SUS316 stainless steel using a plasma source ion implantation method followed by annealing. The chemical composition of the surface layers was determined using GXRD and XPS. The disks were seeded with cultured S. aureus and exposed to UVA illumination from black light. The bactericidal effect of the TiO₂ films was evaluated by counting the survived colonies statistically. A structural gradient anatase type TiO₂ layer formed on all substrates. The viability of the bacteria on the photocatalytic TiO₂ film coated on titanium was suppressed to 7.0% at 30 minutes and 5.5% at 45 minutes, whereas that on a similarly coated stainless steel was suppressed to 45.8% at 30 minute and 28.6% at 45 minutes (ANOVA: p < 0.05). Complete bacterial inactivation was achieved after 90 minutes on titanium and after 60 minutes on stainless steel. The photocatalytic bactericidal effect of TiO₂ is useful for sterilizing the contaminated surfaces of bioimplants. Copyright © 2008 John Wiley & Sons, Ltd.     

Total Synthesis and Biological Evaluation of (+)‐Neopeltolide and Its Analogues

The stereocontrolled total synthesis of the originally proposed ( 1 ) and correct ( 2 ) structures of (+)‐neopeltolide, a novel marine macrolide natural product with highly potent antiproliferative activity against several cancer cell lines as well as potent antifungal activity, has been achieved by exploiting a newly developed Suzuki–Miyaura coupling/ring‐closing metathesis strategy. Alkylborate 44 , which was generated in situ from iodide 34 , was coupled with enol phosphate 8 by a Suzuki–Miyaura coupling. Ring‐closing metathesis of the derived diene 45 followed by stereoselective hydrogenation afforded tetrahydropyran 47 as a single stereoisomer in high overall yield from 34 . Our convergent strategy enabled us to construct the 14‐membered macrolactone core structure of 2 in a rapid and efficient manner. Total synthesis and biological evaluation of synthetic intermediates and designed synthetic analogues, performed to establish the structure–activity relationships of 2 , led to the discovery of a structurally simple yet potent cytotoxic analogue, 9‐demethylneopeltolide ( 54 ).     

On the Lp–Lq maximal regularity for the linear thermoelastic plate equation in a bounded domain

This paper is concerned with the thermoelastic plate equations in a domain Ω: subject to the boundary condition: u|=D_νu|=θ|=0 and initial condition: (u, u_t, θ)|_t=0=(u₀, v₀, θ₀). Here, Ω is a bounded domain in ?ⁿ(n≧2). We assume that the boundary ?Ω of Ω is a C⁴ hypersurface. We obtain an L_p–L_q maximal regularity theorem. Copyright © 2008 John Wiley & Sons, Ltd.     

Application of dual counter-current chromatography for rapid sample preparation of N-methylcarbamate pesticides in vegetable oil and citrus fruit

Dual counter-current chromatography (dual CCC) has been successfully applied to rapid sample preparation for the simultaneous determination of residual carbaryl, fenobucarb and methomyl in vegetable oil and citrus fruit. The citrus fruit samples were extracted with n-hexane solution containing stable isotopically labeled internal standards (methomyl-d3, fenobucarb-d3 and carbaryl-d9), and applied to dual CCC using a two-phase solvent system of n-hexane-acetonitrile to purify the carbamate pesticides from aliphatic sample matrix. The coiled column was rotated at 420 rpm, the lower mobile phase was introduced through the head toward the tail, and the upper mobile phase in the opposite direction. Due to the high partition efficiency of dual CCC, the lower phase fraction collected from 2 to 5 min after injection could be subjected to flow-injection tandem mass spectrometry directly after concentration. Repetitive sample injection can be performed at high reproducibility without a risk of contamination from the compounds retained in the column.     

Purification of coenzyme Q10 from fermentation extract: high-speed counter-current chromatography versus silica gel column chromatography

High-speed counter-current chromatography (HSCCC) is applied to the purification of coenzyme Q(10) (CoQ(10)) for the first time. CoQ(10) was obtained from a fermentation broth extract. A non-aqueous two-phase solvent system composed of heptane-acetonitrile-dichloromethane (12:7:3.5, v/v/v) was selected by analytical HSCCC and used for purification of CoQ(10) from 500 mg of the crude extract. The separation yielded 130 mg of CoQ(10) at an HPLC purity of over 99%. The overall results of the present studies show the advantages of HSCCC over an alternative of silica gel chromatography followed by recrystallization. These advantages extend to higher purity (97.8% versus 93.3%), recovery (88% versus 74.3%) and yield (26.4% versus 23.4%). An effort to avoid the toxic, expensive solvent CH(2)Cl(2) was unsuccessful, but at least its percentage is low in the solvent system.     

Analytical separation of tea catechins and food-related polyphenols by high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) using the type-J coil planet centrifuge was applied to compositional analysis of tea catechins and separation of other food-related polyphenols. The HSCCC separation of nine different standard compounds and those from extracts of commercial tea leaves was performed with a two-phase solvent system composed of tert-butyl methyl ether-acetonitrile-0.1% aqueous trifluoroacetic acid (TFA) (2:2:3, v/v/v) by eluting the upper organic phase at a flow rate of 2 ml/min. The main compounds in the extract of non-fermented green tea were found to be monomeric catechins, their galloylated esters and caffeine. In addition to these compounds, oxidized pigments, such as hydrophobic theaflavins (TFs) and polar thearubigins (TRs) were also separated and detected from the extracts of semi-fermented oolong tea and fermented black tea. Furthermore, several food-related polyphenols, such as condensed catechin oligomers (procyanidins), phenolic acids and flavonol glycosides were clearly separated under the same HSCCC condition. These separation profiles of HSCCC provide useful information about the hydrophobic diversity of these bioactive polyphenols present in various types of teas and food products.     

Thawing of frozen vegetables observed by a small dedicated MRI for food research

The thawing process for boiled and frozen edible vegetables was traced by a dedicated MRI for food research. The MRI system is small, with a 1.0-T static magnetic field, and can be placed in an ordinary research room with a light air conditioner. Images of green soybeans, broad beans, okra, asparagus and taro were measured by the spin-echo method (echo time=7 ms) with 0.1 or 0.2 s and 1 s repetition times. The images appeared along with the thawing time, and signals uniformly covered the sliced plane of the samples in the thawed condition. Information about the thawing process and tissue structures of the materials was obtained during transit thawing conditions. The thawing kinetics were examined with increased signal intensity, which were divided into two types. The signal increased linearly and saturated for okra and asparagus but exhibited convex curves for soybeans, broad beans and taro. The small MRI was stable, its handling was simple, and the internal structures of food materials could be accurately identified, although the grey-scale of the images was insufficient for determining precise textural fluctuations of tissue organization. We conclude that the devised MRI is useful for examining the quality of frozen foods and for developmental research into frozen foods.     

Application of counter-current chromatography as a new pretreatment method for the determination of polycyclic aromatic hydrocarbons in environmental water

Counter‐current chromatography (CCC) was investigated as a new sample pretreatment method for the determination of trace polycyclic aromatic hydrocarbons (PAHs) in water environmental samples. The experiment was performed with a non‐aqueous binary two‐phase solvent system composed of n‐heptane and acetonitrile. The CCC column was first filled with the upper stationary phase, and then a large volume of water sample was pumped into the column while the CCC column was rotated at 1600 rpm. Finally, the trace amounts of PAHs extracted and enriched in the stationary phase were eluted out by the lower mobile phase and determined by gas chromatography–flame ionization detector (GC‐FID) or gas chromatography–mass spectrometry (GC‐MS). The enrichment and cleanup of PAHs can be fulfilled online by this method with high recoveries (84.1–103.2%) and good reproducibility (RSDs: 4.9–12.2%) for 16 EPA PAHs under the optimized CCC pretreatment conditions. This method has been successfully applied to determine PAHs in lake water where 8 PAHs were detected in the concentration of 40.9–89.9 ng/L. The present method is extremely suitable for the preparation of large volume of environmental water sample for the determination of trace amounts of organic pollutants including PAHs as studied in this paper.