Phase Separation in Sol-Gel System Containing Mixture of 3- and 4-Functional Alkoxysilanes

The phase separation behavior of gelling systems containing the mixture of 3-functional and 4-functional alkoxysilanes has been investigated. The relation between the starting composition and resultant macroporous morphology was examined using tetramethoxysilane (TMOS) and vinyltrimethoxysilane (VTMS) as starting alkoxysilanes, formamide (FA) as an additive, under an acidic condition. Up to TMOS:VTMS molar ratio of 0.5:0.5, the phase relation remained almost unchanged from that of pure TMOS system which exhibits morphology with well-defined co-continuous macropores in a very limited concentration region. On the VTMS-rich side typically TMOS:VTMS = 0.2:0.8, however, the co-continuous macroporous morphology was obtained in a broader composition range than those of either pure TMOS or VTMS system. A dome-like pseudo binary region was obtained with the two-phase region extending toward FA-rich direction. The domain size and pore volume of the gels with macroporous morphology could be controlled by alkoxide:water ratio and total solvent fraction, respectively.     

Estimation of electrophoretic mobilities of red blood cells in 1-G and microgravity using a miniature capillary electrophoresis unit

Electrophoretic mobilities of red blood cells (RBCs) were measured in microgravity using a home-made capillary electrophoresis unit, which consisted of two small reservoirs of 0.6 mL and a fused-silica capillary tubing with 2 cm in length and 50 num in inner diameter. Migration of RBCs was observed by a microscope at 1000 times magnification and recorded on a videotape. The experiments were performed during stays in microgravity (about 0.01 G), which lasted 20 s and were attained by parabolic flights of an aircraft. On average, the electrophoretic mobilities of RBCs determined in microgravity were about 30% higher than those measured at 1-G condition irrespectively whether the cells were suspended in saline or serum during measurements. This difference might be explained as being mainly due to the cell floating in microgravity. Morphological changes of RBCs may contribute partly to the difference, while the variation in viscosity of the medium under microgravity could play only a minor role.     

Circular dichroism spectra of the inclusion complexes of phlorizin in cyclodextrins

Two aromatic rings of a phlorizin molecule form inclusion complexes with -CD and -CD. Induced circular dichroism spectra of these complexes have been measured to estimate the orientation of the two aromatic rings in the hydrophobic space of CDs. Apparent complex formation constants have been also estimated for each complex. It is concluded that phlorizin forms a stronger inclusion complex with -CD than with -CD.     

Photoaffinity labeling of bovine rhodopsin

Photoaffinity labeled (3-diazoacetoxy)-9-cis-retinal (1) and (9-methylenediazoacetoxy)-9-cis-retinal (20) were synthesized and bound to absorption maxima at 465 and 460 nm respectively. Binding studies established that synthetic retinals 1 and 2 bind to the natural binding site and that the integrity of the diazoacetoxy photoaffinity label is preserved in the process. Incorporation of 3-(O¹⁴COCHN₂)-labeled 9-cis retinal could be conveniently carried out in high yield using apomembrane solubilized in CHAPS as detergent to afford the pigment analog in a pure form. Photolysis of the diazoacetoxy group within the binding site led to 15–20%, crosslinking of rhodopsin as estimated by using radiocarbon containing labeled retinal 1 thus showing that this synthetic retinal is suitable for photoaffinity labeling of the active site in rhodopsin. Subsequent experiments to establish the site(s) of crosslinking by sequencing studies will then contribute to our knowledge of the structure of rhodopsin.     

Four-m calculations on methanol-water solutions

The structural characteristics of methanol in aqueous solutions, on a molecular level, can be elucidated by four types of calculation: molecular orbital, multiparametric optimization of intermolecular potential function, Monte Carlo, and molecular dynamics. As a first step, the potential between water and methanol was determined by ab initio LCAO SCF molecular orbital calculations with the STO—3G basis set and subsequent multiparametric fitting. This and water—water potentials were used for Monte Carlo calculation on an aqueous methanol solution containing a 1:216 mole ratio of methanol to water. Hydration around methanol is briefly discussed.     

Investigations on poly(vinyl chloride). I. Evolution of aromatics on pyrolysis of poly(vinyl chloride) and its mechanism

Poly(vinyl chloride) (PVC) alone or mixed with 10 wt-% and 50 wt-% TiO₂, SnO₂, ZnO, and Al₂O₃ were pyrolyzed by using a pyrolysis gas chromatograph. Benzene, toluene, ethylbenzene, o-xylene, styrene, naphthalene, and various chlorobenzenes were identified. No hydrocarbons could be detected in pyrolysis products of any samples at 200°C. More aromatic hydrocarbons than aliphatic hydrocarbons are released from the PVC–TiO₂ system and in preheated PVC. The contrary result is observed in the PVC–ZnO and PVC–SnO₂ systems. Aromatics having methyl endgroups are easily released from the PVC–ZnO and PVC–SnO₂ systems and at elevated pyrolysis temperature, because methylene groups are easily isolated along the chain by ZnO, SnO₂ and the heating. The release of ethylbenzene o-xylene, and chlorobenzenes suggests a repeated dehydrochlorination and recombination of HCl and Cl₂ to double bonds along the chain. Possible decomposition mechanisms of PVC are discussed.     

Solvent extraction and spectrophotometric determination of iron(II) with 2,2′-dipyridyl-2-furancarbothiohydrazone

2,2′-Dipyridyl-2-furancarbothiohydrazone (DPFTH) was used for the spectrophotometric determination of trace amount of iron(II) after the extraction process. Iron(II) can be quantitatively extracted with DPFTH in benzene from aqueous solution buffered to 3.0–8.0. The extracted species has absorption maxima at 440, 477, and 738 nm and obeyed Beer's law over the range 0–40 μg of iron in 10 ml at 738 nm. The molar absorptivity at this wave length is 1.17 × 10⁴ liters mole^?1 cm^?1. The proposed method is relatively selective for iron(II) and is satisfactorily applied to the determination of the total iron in natural waters. The proton dissociation constants of the ligand determined spectrophotometrically were pK_a1 = 2.88 and pK_a1 = 6.70 at 25 °C and μ = 0.1.     

Fast separation of oligonucleotide and triplet repeat DNA on a microfabricated capillary electrophoresis device and capillary electrophoresis

A laser-induced fluorescence detection system coupled with a highly sensitive silicon-intensified target (SIT) camera is successfully applied to the imaging of a band for DNA fragment labeling by fluorescence dye in a microchannel, and to the visualizing of the separation process on a microfabricated chip. We demonstrated that an only 6 mm separation channel is sufficient for the separation of triplet repeat DNA fragment and DNA molecular marker within only 12 s. The separation using the microfabricated capillary electrophoresis device is confirmed to be at least 18 times faster than the same separation carried out by conventional capillary electrophoresis with 24.5 cm effective length. The use of a short capillary with 8.5 cm effective length is also efficient for fast separation of DNA; however, the microchip technology is even faster than capillary electrophoresis using a short capillary.     

NMR, UV-vis and CD study on the interaction of pradimicin BMY-28864 with divalent cations of alkaline earth metal

In order to clarify the mechanism of the calcium-activated anti-fungal action of pradimicin derivatives, we investigated the compatibility of four divalent metal cations, Ca2+, Mg2+, Sr2+ and Ba2+, when combined with pradimicin BMY-28864 in an aqueous solution. The 1H NMR studies suggest that all the tested cations can induce a chemical exchange between two types of aggregation of BMY-28864 in an aqueous solution. The exchange rate, however, varies according to the cation species. In descending order they are: Ba2+ > Sr2+ > Ca2+ > Mg2+. The differences in the binding ability of BMY-28864 to the cations and the solubility of the chloride salts are explained by the electronegativity of these cations. The UV-Vis and CD spectra of these solutions show isosbestic points that correspond to an exchange process in the cations' binding to BMY-28864. The results provide experimental support for the hypothesis that there is a common mechanism underlying their cations interactions with the antibiotic. The CD study also provided evidence about the stoichiometric relation of the divalent metal ions to the antibiotic, 1:2, which was obtained by NMR analyses.     

Kinetic study of the electron-transfer oxidation of the phenolate anion of a vitamin E model by molecular oxygen generating superoxide anion in an aprotic medium

Electron-transfer reduction of molecular oxygen (O2) by the phenolate anion (1-) of a vitamin E model, 2,2,5,7,8-pentamethylchroman-6-ol (1H), occurred to produce superoxide anion, which could be directly detected by a low-temperature EPR measurement. The rate of electron transfer from 1- to O2 was relatively slow, since this process is energetically unfavourable. The one-electron oxidation potential of 1- determined by cyclic voltammetric measurements is sufficiently negative to reduce 2,2-bis(4-tert-octylphenyl)-1-picrylhydrazyl radical (DOPPH*) to the corresponding one-electron reduced anion, DOPPH-, suggesting that 1- can also act as an efficient radical scavenger.