Modified modeling of the effect of pH and viscosity on the mass transfer in hydrophobic hollow fiber membrane contactors

This paper studied the effect of pH and the viscosity of feed solution on the mass transfer in two different specifications of hydrophobic hollow fiber membrane contactors. Experimental results showed that the pH of the feed had a significant effect on the rate of mass transfer, the flux and the removal efficiency of easily ionized volatile compounds (VCs), such as ammonia. In unbuffered feed solutions, both the resistance of membrane and the resistance of feed side were affected by the pH of feed and both of them had contributions to the overall mass transfer. A model, , was proposed to predict the effect of pH and gave good agreement with the experimental data for the two contactors. The relationship between viscosities and the mass transfer coefficient could be described by . Based on our experiments, the change of the viscosities in the concentration range of ammonia from 50 to 10,000 mg l⁻¹ caused about 3–4% variation of the mass transfer coefficients. Moreover, it may be more suitable to use the equilibrium concentrations of volatile species instead of the total concentrations of VCs to estimate mass transfer coefficients, removal efficiency and flux. Experimental results also revealed that the choice of the pH of feed might be one of the most crucial factors for removing easily ionized VCs, such as ammonia, from water and wastewater.     

Characterization of low molecular weight components of [(ViMe2SiO1/2)x(PhSiO3/2)y(SiO4/2)z], [(ViMe2SiO1/2)x(SiO4/2)y], and [(SiO4/2)x(HO1/2)y(tBuO1/2)z] silsesquioxanes by electrospray ionization fourier transform mass spectrometry (ESI-FTMS)

This paper describes the characterization of low molecular weight components of four materials using electrospray ionization Fourier transform mass spectrometry (ESI-FTMS). The materials in the current study are [(ViMe₂SiO_1/2)_x(PhSiO_3/2)_y(SiO_4/2)_z] (MTQ), [(ViMe₂SiO_1/2)_x(SiO_4/2)_y] (MQ), and [(SiO_4/2)_x(HO_1/2)_y(^tBuO_1/2)_z] (Q) silsesquioxanes. Accurate mass measurements coupled with knowledge of resin chemistry afforded siloxane composition determination that was used to propose specific structures for the oligomers. Branched or linear (T_nQ_mM_n+2m+2), and monocyclic (T_nQ_mM_n+2m) structures are predominant structures for the low molecular weight species in MTQ. For MQ and Q, more condensed structures, such as partially opened cage structures (Q_mM_2m?6 and Q_mM_2m?8), were identified. The differences between MQ, Q, and MTQ are likely attributed to differences in intrinsic structure and reactivity of T and Q building blocks. The structural information obtained for these oligomeric species will ultimately provide a better understanding of new resin materials and their associated physical properties.     

Effects of matrix-assisted laser desorption/ionization experimental conditions on quantitative compositional analysis of ethylene oxide/propylene oxide copolymers

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry has the potential to become a valuable tool for the compositional analysis of copolymers. For a copolymer composed of structurally very similar building blocks with minor chain length changes, one would expect the relative peak intensities observed in the MALDI mass spectra to reflect its composition, at least within a narrow mass range. However, we show that variations in experimental conditions in MALDI can have a significant effect on the mass spectral appearance of a copolymer. The effects of concentration, laser power, type of matrices and solvents on mass spectra of an ethylene oxide/propylene oxide copolymer are illustrated. These somewhat surprising results show that great care needs to be exercised when interpreting copolymer spectra for compositional analysis, even for copolymers with structurally similar monomers. This work also points out that further studies are needed to better understand and optimize spectral acquisition conditions for reliable copolymer compositional analysis by MALDI.     

A semi-rigid bis(imidazolyl) ligand for the construction of nanoscopic supramolecules. From the molecular rectangle to the 1D coordination polymer

Reaction of the semi-rigid ligand 2,4-bis(1-imidazolylmethyl)-mesitylene (m-bimms) with CdCl₂ afforded a boat-like molecular rectangle [Cd(m-bimms)Cl₂]₂ · 1/2H₂O (1), with the orientation of the two imidazolyl arms of the ligand in syn-conformation and bridging chloride ions bisecting the macrocycle. Weak Cl· · ·H—C interations further extended the dimers into 1D infinite chains with nanoscopic channels. An analogous reaction with Cd(NO₃)₂ gave a 1D coordination polymer [Cd(m-bimms)₂(NO₃)₂]_n · 2nH₂O (2) composed of nanoscopic metallamacrocycles, where the two imidazolyl arms adopt an anti-conformation. Different anions result in different ligand conformations and thus determine the varied molecular architectures.     

氯化铯和氯化镧溶剂体系及四类新化合物的合成

研究了四元体系ＣｓＣｌ－ＬａＣｌ３－ＨＣｌ－Ｈ２Ｏ（２５℃、「ＨＣｌ」＝１３％（ｗｔ），２３％（ｗｔ）和ＣｓＣｌ－ＬａＣｌ３－ＨＡｃ－Ｈ２Ｏ（３０℃，「ＨＡｃ」＝４２％（ｗｔ））的平衡态的溶度数据，并给出制了相应的溶度图，共得到了ＣｓＣｌ．ＬａＣｌ３．４Ｈ２Ｏ、２ＣｓＣｌ．ＬａＣｌ３．２Ｈ２Ｏ和３ＣｓＣｌ．ＬａＣｌ３．３Ｈ２Ｏ３种化合物。对得到的新相进行了热分析，Ｘ射线粉末衍射及偏光性质的测定，依     

A comparative study of quantitative structure-activity relationship methods based on gallic acid derivatives

By using hologram quantitative structure-activity relationship (HQSAR) and comparative molecular field analysis (CoMFA) methods, the relationships between the structures of 49 gallic acid derivatives and their analgesic activity have been investigated to yield statistically reliable models with considerable predictive power. The best HQSAR model was generated using atoms, bond and connectivity as fragment distinction parameters and fragment size 5-7 from a hologram length of 307 with 3 components. High conventional r2 (r2 = 0.825) and cross-validation r2 (r2(cv) = 0.726) values were obtained. CoMFA analyses varying lattice size and location, grid spacing, probe charges and using, Tripos standard and Indicator force field were performed. The best model was developed with 4 components using sp3-hybridized carbon atom with +1.0 charge as probe, grid spacing (2 A), lattice offset (1.0, 3.0, -2.5). The CoMFA model showed a conventional correlation coefficient r2 of 0.889 and across-validation r2(cv) equals to 0.633. The robustness and predictive ability of the HQSAR and CoMFA models have been validated by means of an external test set. The results indicate that both models possess high statistical quality in the prediction of analgesic potency of novel gallic acid analogs.     

A hexacyclic ent-trachylobane diterpenoid possessing an oxetane ring from Mitrephora glabra

[chemical reaction: see text]. Three new ent-trachylobane diterpenoids (1-3) were isolated and structures elucidated from Mitrephora glabra Scheff. (Annonaceae). Mitrephorone A (1) possesses a hexacyclic ring system with adjacent ketone moieties and an oxetane ring, both of which are unprecedented among trachylobanes. All compounds were evaluated for cytotoxicity against a panel of cancer cells, where 1 displayed the most potent and broadest activity, and against a battery of antimicrobial assays, where all compounds were approximately equipotent.     

Topology evolution and gelation mechanism of agarose gel

Kinetics as well as the evolution of the agarose gel topology is discussed, and the agarose gelation mechanism is identified. Aqueous high melting (HM) agarose solution (0.5% w/v) is used as the model system. It is found that the gelation process can be clearly divided into three stages: induction stage, gelation stage, and pseudoequilibrium stage. The induction stage of the gelation mechanism is identified using an advanced rheological expansion system (ARES, Rheometric Scientific). When a quench rate as large as 30 deg C/min is applied, gelation seems to occur through a nucleation and growth mechanism with a well-defined induction time (time required for the formation of the critical nuclei which enable further growth). The relationship between the induction time and the driving force which is determined by the final setting temperature follows the 3D nucleation model. A schematic representation of the three stages of the gelation mechanism is given based on turbidity and rheological measurements. Aggregation of agarose chains is promoted in the polymer-rich phase and this effect is evident from the increasing mass/length ratio of the fiber bundles upon gelation. Continuously increasing pore size during gelation may be attributed to the coagulation of the local polymer-rich phase in order to achieve the global minimum of the free energy of the gelling system. The gel pore size determined using turbidity measurements has been verified by electrophoretic mobility measurements.     

Bridged bis-pyridinylimino dinickel(II) complexes: Syntheses, characterization, ethylene oligomerization and polymerization

A series of bridged bis(pyridinylimino) ligands were efficiently synthesized through the condensation reaction of 4,4′-methylene-bis(2,6-disubstituted aniline) with 2-pyridinecarboxaldehyde or 2-benzoylpyridine. They reacted with (DME)NiBr₂ to form dinuclear Ni(II) complexes. All resultant compounds were characterized by elemental analysis, IR spectra as well as the single-crystal X-ray diffraction to confirm the structures of ligands and complexes. Activated with methylaluminoxane (MAO), these nickel complexes showed considerably good activities for ethylene oligomerization and polymerization. Their catalytic activities and the properties of PEs obtained were depended on the arched environment of ligand and reaction conditions.