紫外光度法间接测定脱脂乳中的芽孢数量

为了有效控制乳制品生产过程、保证质量,克服芽孢杆菌传统计数方法周期长的缺点,本实验通过分光光度法检测芽孢中特异性物质2,6-吡啶二羧酸(DPA)。根据DPA浓度与芽孢数量的关系,建立了快速检测脱脂乳中芽孢数量的方法。本研究对脱脂乳及其芽孢处理、DPA释放及采用紫外分光光度法检测做了研究。通过准确度和加标回收率检验,建立DPA含量与芽孢数的线性关系,回归方程为y=0.2084x-0.9363,r=0.6998,经验证可有效估测脱脂乳中芽孢数量(P<0.05)。     

四苯基卟啉及其衍生物的表面光电压谱

酞菁和卟啉染料是一类典型的分子半导体材料,由于其在生命过程、癌的治疗等生物学上的探索及其化学传感、光电特性在固体电子学器件研究中占有很重要的地位。尤以这类染料的光电性质深受人们的重视,这与太阳能光电池、光MOS晶体管等的应用前景是分     

多功能沸点仪的研究

本文提出了两种新型沸点仪——CP-Ⅰ型和CP-Ⅱ型沸点仪, 阐述了仪器各部分结构的设计思想和原理, 并对仪器的性能和各部分功能进行了较为完整的实验考核, 获得了预期的效果。     

Kinetics of uranium(VI) extraction by bis(octylsulfinyl)methane

The kinetics and mechanism of uranium(VI) extraction from nitric acid solution by bis(octylsulfinyl)methane (BOSM) are studied with the method of stationary interface cell. The effects of temperature, extractant and nitric acid concentrations are discussed. The results showed that the extraction process is controlled by the following reaction: UO₂(NO₃)₂ + BOSM_(i)⇄_k1 ^k-1UO₂(NO₃)₂BOSM_(i). The variation of enthalpy associated with the extraction is -22.1±2.1 kJ/mol. This revised version was published online in July 2006 with corrections to the Cover Date.     

反应条件对钌基氨合成催化剂性能的影响

用氨合成催化剂性能评价装置,研究了反应温度、压力、空速和氢氮比对以活性炭为载体的钌基氨合成催化剂活性的影响。研究表明,低于400℃时,随着反应温度降低,催化剂的活性急剧降低。随着压力升高,催化剂活性增大。但钌催化剂具有较高的低压活性,适宜低压合成氨。随着空速的降低,催化剂的活性明显提高。在空速和压力一定的条件下,最佳氢氮比随反应温度而异,并且当空速较高或反应温度较低时,氢氮比的变化对催化剂活性的影响更加明显。     

Preparation of Tin Oxide-Based Metal Oxide Particles

Tin oxide-doped hybrid particles were prepared by a wet chemical process with organic-inorganic (phenyl/silica) hybrid particles in an alcoholic solution. The phenyl/silica hybrid particles, with a diameter of ca. 790 nm were used as a new support material for tin oxide (SnO₂) particles from tin(IV) chloride. The surface of the particles was modified via nitration of aromatic groups in the particles, to promote formation of the tin oxide coating on the particles. The thickness and surface morphology of the tin oxide layer coated on the nitrated-phenyl/silica hybrid particles could be controlled by varying the tin(IV) chloride concentration and reaction time. The size and morphology of the resultant particles were investigated with field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The particles obtained were also characterised by infrared (FTIR) and solid-state ¹³C magic angle spinning nuclear magnetic resonance (¹³C-CP/MAS NMR) spectroscopy. The effect of processing parameters on the crystallinity and structure of the doped hybrids were confirmed by X-ray diffraction (XRD) patterns.     

长光路光度法测定中药材中痕量硒

本文研究了用长光路光度法测定痕量硒。在酸性溶液中，Ｓｅ（Ⅳ）催化ＫＣｌＯ３氧化苯肼成偶氮离子，继而与变色酸生成红色偶氮化合物。硒含量在１．０×１０－９～２．０×１０－７ｇ／ｍＬ范围内遵守比尔定律。巯基棉分离后，测定中药材中总硒，获得满意结果。     

Deposition of Layer－by－layer Inorganic－organic Nano－hybrid Ultrathin Films onto SBA－15

Deposition of inorganic-organic nano-hybrid ultrathin films onto mesoporous silicate materials has been proven possible by using layer-by-layer assembly method. In combination with sol-gel method, titania, subsequently dye molecules (or polymer) were successfully fabricated onto the inner wall of SBA-15. Their structures were preliminarily characterized by FTIR and solid-state UV-Vis spectroscopy, thermal analysis, and BET surface area measurements,respectively.     

气相色谱法分析生产过程中的邻甲基苯胺

气相色谱法测定工业生产过程中邻甲基苯胺及其杂质邻硝基甲苯、间甲基苯胺、对甲基苯胺的含量。4种物质的浓度与色谱峰面积呈良好的线性关系,测定结果与标准值基本一致。邻甲基苯胺、邻硝基甲苯、间甲基苯胺、对甲基苯胺的RSD分别为0.0025%、1.4081%、0.9929%、1.1365%,检出限分别为0.065、0.044、0.062、0.056mg/L。