石墨化氮化碳负载Cu纳米颗粒用作高效氧还原电催化剂

高活性低成本氧还原反应(ORR)电催化剂是燃料电池和金属/空气电池等可再生能源技术的关键组成部分.在离子液体[(C16mim)2CuCl4]和质子化的石墨化氮化碳(g-CN)的存在下,采用简易的水热反应制备了Cu/g-CN电催化剂用于ORR.与纯的g-CN相比,所制Cu/g-CN表现出高的ORR催化活性:起始电势正移99 mV,为2倍动力学电流密度.另外,Cu/g-CN还表现出比商用Pt/C(HiSPECTM 3000,20%)催化剂更好的稳定性和甲醇容忍性.因此,该催化剂作为廉价的高效ORR电催化剂有望应用于燃料电池中.     

Development of nitrilase-mediated process for phenylacetic acid production from phenylacetonitrile

This study aimed at developing an efficient biotransformation process for phenylacetic acid production from phenylacetonitrile by using recombinant Escherichia coli M15 harboring a double mutant MG nitrilase (I113M/Y199G) from Burkholderia cenocepacia J2315. A yield of 2310 U/mL nitrilase was obtained by fermentation after the optimization of cultivation conditions, with a specific activity of 64 U/mg dcw. The MG nitrilase showed high substrate tolerance and completely hydrolyzed 100 mM phenylacetonitrile in 30 min under optimal conditions. To alleviate substrate inhibition, periodic or continuous batch-feeding of substrate was used during the biotransformation. Up to 164 g/L substrate was completely hydrolyzed in 9 h with continuous batch-feeding using resting cells, corresponding to 400 U/mL of nitrilase activity, and leading to production of 163.4 g/L phenylacetic acid. The hydrolysis process has potential application for phenylacetic acid production on a large scale.     

可燃颗粒悬浮流中的正激波

本文讨论了激波后可燃颗粒点火、燃烧的机制和波后流场的松弛结构,结果表明,点火阶段颗粒外层浓度梯度极大,燃烧速率由非均相化学反应速率决定,而在燃烧阶段,外层的浓度梯度极大,燃烧速率由气体的扩散速率所决定。在考虑管壁效应时,对守恒方程中的能量耗散项作了说明。     

稳恒扩展裂纹尖端的弹粘塑性场

采用弹粘塑性力学模型代替通常的弹塑性模型，对于I型和Ⅱ型问题，分别求得了不可压缩材料中平面应变动态扩展裂纹尖端的指数奇异性场和对数奇异性场，消除了弹塑性解中存在的塑性激波。通过数值计算，分别求得了两种奇异属性的分界线，建立起统一的裂纹尖端奇异性场。     

A Competitor-switched Electrochemical Sensor for Detection of DNA

A competitor‐switched electrochemical sensor based on a generic displacement strategy was designed for DNA detection. In this strategy, an unmodified single‐stranded DNA (cDNA) completely complementary to the target DNA served as the molecular recognition element, while a hairpin DNA (hDNA) labeled with a ferrocene (Fc) and a thiol group at its terminals served as both the competitor element and the probe. This electrochemical sensor was fabricated by self‐assembling a dsDNA onto a gold electrode surface. The dsDNA was pre‐formed through the hybridization of Fc‐labeled hDNA and cDNA with their part complementary sequences. Initially, the labeled ferrocene in the dsDNA was far from surface of the electrode, the electrochemical sensor exhibited a "switch‐off" mode due to unfavorable electron transfer of Fc label. However, in the presence of target DNA, cDNA was released from hDNA by target DNA, the hairpin‐open hDNA restored its original hairpin structure and the ferrocene approached onto the electrode surface, thus the electrochemical sensor exhibited a "switch‐on" mode accompanying with a change in the current response. The experimental results showed that as low as 4.4×10⁻¹⁰ mol/L target DNA could be distinguishingly detected, and this method had obvious advantages such as facile operation, low cost and reagentless procedure.     

Photodegradation of Rhodamine B on Sulfur Doped ZnO/TiO2 Nanocomposite Photocatalyst under Visible-light Irradiation

Sulfur doped ZnO/TiO₂ nanocomposite photocatalysts were synthesized by a facile sol‐gel method. The structure and properties of catalysts were characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), UV‐vis diffusive reflectance spectroscopy (DRS) and N₂ desorption‐adsorption isotherm. The XRD study showed that TiO₂ was anatase phase and there was no obvious difference in crystal composition of various S‐ZnO/TiO₂. The XPS study showed that the Zn element exists as ZnO and S atoms form SO^2?₄. The prepared samples had mesoporosity revealed by N₂ desorption‐adsorption isotherm result. The degradation of Rhodamine B dye under visible light irradiation was chosen as probe reaction to evaluate the photocatalytic activity of the ZnO/TiO₂ nanocomposite. The commercial TiO₂ photocatalyst (Degussa P25) was taken as standard photocatalyst to contrast the prepared different photocatalyst in current work. The improvement of the photocatalytic activity of S‐ZnO/TiO₂ composite photocatalyst can be attributed to the suitable energetic positions between ZnO and TiO₂, the acidity site caused by sulfur doping and the enlargement of the specific area. S‐3.0ZnO/TiO₂ exhibited the highest photocatalytic activity under visible light irradiation after Zn amount was optimized, which was 2.6 times higher than P25.     

Synthesis,Characterization and Thermal Behaviors of 4-Amino-5-nitro-1,2,3-triazole(ANTZ)and Its Derivatives

4‐Amino‐5‐nitro‐1,2,3‐triazole (ANTZ) and its derivatives, such as 2‐(4‐amino‐5‐nitro‐1,2,3‐trazole‐1‐yl)‐1,3,5‐trinitrobenzene (T‐ANTZ) and 4‐amino‐5‐nitro‐1,2,3‐triazole (M‐ANTZ), were synthesized and characterized, whose structures were confirmed by IR, NMR and elemental analysis. The thermal behaviors of ANTZ, T‐ANTZ and M‐ANTZ were studied by the methods of DSC and TG‐DTG, and the results showed that there is an obvious melting process of ANTZ with melting point of 278.38°C, while there is no melting process in the thermal behavior of T‐ANTZ and M‐ANTZ (the derivatives of ATNZ).     

NF3 decomposition over some metal oxides in the absence of water

NF3 decomposition in the absence of water over Al2O3, Fe2O3, Co3O4 and NiO, and transition metal oxides (Fe2O3, Co3O4 and NiO) coated Al2O3 reagents was investigated. The results show that Al2O3 is an active reagent for NF3 decomposition with 100% conversion lasting for 8.5 h at 400 ℃. Fe2O3, Co3O4 and NiO coated Al2O3 reagents are superior to bare Al2O3, and 5%Co3O4/Al2O3 has a high reactivity with NF3 full conversion maintaining for 10.5 h. It is suggested that the presence of transition metal oxide is beneficial to the reactivity of Al2O3, and results in a significant enhancement in the fluorination of Al2O3.