Positional targets for lingual consonants defined using electromagnetic articulography

The study examined the positional targets for lingual consonants defined using a point-parameterized approach with Wave (NDI, Waterloo, ON, Canada). The overall goal was to determine which consonants had unique tongue positions with respect to other consonants. Nineteen talkers repeated vowel-consonant-vowel (VCV) syllables that included consonants /t, d, s, z, , k, g/ in symmetrical vowel contexts /i, u, a/, embedded in a carrier phrase. Target regions for each consonant, characterized in terms of x,y,z tongue positions at the point of maximum tongue elevation, were extracted. Distances and overlaps were computed between all consonant pairs and compared to the distances and overlaps of their contextual targets. Cognates and postalveolar homorganics were found to share the location of their target regions. On average, alveolar stops showed distinctively different target regions than alveolar fricatives, which in turn showed different target region locations than the postalveolar consonants. Across talker variability in target locations was partially explained by differences in habitual speaking rate and hard palate characteristics.     

Hygroscopic growth of aerosol scattering coefficient:A comparative analysis between urban and suburban sites at winter in Beijing

A humidity controlled inlet system was developed to measure the hygroscopic growth of aerosol scattering coefficient in conjunction with nephelometry at an urban site of Chinese Academy of Meteorological Sciences (CAMS) in Beijing and a rural site at Shangdianzi Regional Background Air Pollution Monitoring Station (SDZ) outside Beijing during winter, from December 2005 to January 2006. Measurements were carried out at a wavelength of 525 nm with an Ecotech M9003 nephelometer. The hygroscopic growth function (or factor) of the aerosol scattering coefficientf(RH) increased continuously with increasing relative humidity (RH) and showed no obvious "step-like" deliquescent behavior at both sites during the experiment. The average growth factorf(RH) at the SDZ site could reach 1.5 when RH increased from less than 40% to 92%, and to 2.1 at the CAMS site when RH increased from less than 40% to 93%. The average hygroscopic growth factor at a relative humidity of 80%, f(RH=80±1%), was found to be about 1.26±0.15 at CAMS and 1.24±0.11 at SDZ. Further analysis indicated that under relatively polluted conditions, the average hygroscopic growth factor was higher at the CAMS site than that at the SDZ site. However, under relatively clean air conditions, the difference between the two sites was small, showing a hygroscopic growth behavior similar to those of burning biomass or blowing dust. These results reflected the different characteristics of aerosol types at the two sites.     

HYDROGENATION OF NITROBENZENE TO FORM ANILINE IN LIQUID PHASE AT ATMOSPHERIC PRESSURE

Aromatic amine compounds and their derivatives are important intermediates of fine chemicals like dye and medicine.The former hydrogenation catalyst has many problems,such as environment pollution caused by old technology,strict reaction condtion,complicated equipment,bad property of catalyst and so on.Holy ^[1] firstly reported the hydrogenation of nitrobenzene on modified polystyrene Pd catalyst.But how to improve the activity,selectivity and stability of the polymer suppoorter catalyst needs to studyfurther.We prepared a series of polymer supported catalysts by the methods of adsorption and mechanical mixting ,selected a high active catalyst Pd-Ah-1 by observing the hydrogenation of nitrobenzene.     

Charge‐Transfer Complexes Between the Sulfur Molecules SO2, S2O,S3, SONH,and SOCl2 and the Amine Donors NH3 and NMe3 — A theoretical Study

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.     

Gas phase structure and vibrational spectra of dimethoxysulfane (CH3O)2S

The vapor phase structure of (CH₃O)₂S [1] has been investigated by electron diffraction and ab initio MO calculations, which both result in a C₂ symmetry for the most stable geometry, the C_s conformer being less stable by about 12 kJ/mol. The torsional barrier for rotation about one SO bond was calculated as 37 kJ/mol (trans barrier). The geometrical parameters (electron diffraction) of the C₂ conformer are: d_SO = 162.5(2), d_CO = 142.6(3), d_CH = 110.5(7) pm angles OSO = 103(1)°, SOC = 115.9(4)°, HCH = 109(1)°, torsional angle COSO = 84(3)°. Geometrical data calculated with 6-31G^* basis set agree well with the diffraction data; calculated dipole moments 1.1 D (C₂) and 3.3 D (C_s). The infrared spectrum of gaseous (CH₃O)₂S and the Raman spectra of liquid and solid (CH₃O)₂S are reported and have been almost fully assigned to the 27 fundamental vibrations.     

振动噪声等高图的电驱动桥噪声预测及优化*

在项目开发前期通过优化电驱动桥扭矩特性的设计,可以规避噪声大问题。根据电驱动桥台架在对应扭矩下的振动噪声特性,提出了一套稳定高效的测试流程和分析方法。首先设计了一套完整的试验流程,制定了精准的数据分析方法。然后绘制出能够全面反映电驱动桥振动噪声特性的等高图。最后利用电驱动桥台架的振动噪声等高图,准确评估电驱动桥加速工况下振动噪声风险,为主机厂和电驱动桥零部件企业提供电驱动桥扭矩特性设计前期指导。利用该方法成功识别到某电驱动桥匀速及加速工况下电机及齿轮的啸叫问题。通过优化电驱动桥扭矩特性设计,电机48阶噪声峰值降低了8.5dB(A),确认该方法准确可靠,具备推广应用价值。     

Nanosized multilayer films with concurrent photochromism and electrochromism based on Dawson-type polyoxometalate

An inorganic-organic composite multilayer film constructed of poly(vinyl alcohol) (PVA) with Dawson-type phosphotungstate anion [P₂W₁₈O₆₂]⁶⁻ (P₂W₁₈) and poly(allylamine hydrochloride) (PAH) were fabricated on quartz, ITO, silicon and CaF₂ substrates by a layer-by-layer self-assembly method. The film was provided with concurrent photochromism and electrochromism. IR spectra showed that the structure of the PVA was fully maintained in the multilayer film. And their photochromic and electrochromic properties were investigated by UV-vis spectra, cyclic voltammetry (CV), chronoamperometry (CA) measurement and X-ray photoelectron spectra (XPS). Atomic force microscopy (AFM) was used to investigate the surface topography. This study provides a new route to explore the possibility of application to polyoxometalate-based hybrid inorganic-organic materials.