Transformation of l-phenylalanine to (S)-indoline-2-carboxylic acid without group-protection

(S)-Indoline-2-carboxylic acid was synthesized by use of a nitro amination approach with l-phenylalanine as chiral pool. The first step of the synthesis was nitration of l-phenylalanine, with urea nitrate (UN)/H₂SO₄ as nitrating reagent, to give 2,4-dinitro-l-phenylalanine in 75.7 % yield in one-pot synthesis and 69.1 % yield by step-wise nitration. Intramolecular nitro amination of 2,4-dinitro-l-phenylalanine gave (S)-6-nitro-indoline-2-carboxylic acid in 65.7 % yield and more than 99.5 % enantiomeric excess (ee). The title compound, (S)-indoline-2-carboxylic acid, was obtained in 85.9 % yield and high ee by one-pot transformation of (S)-6-nitroindoline-2-carboxylic acid. The total synthesis consisted of three operations and gave the title compound in 42 % yield and more than 99.5 % ee.     

Preparation and photocatalytic antibacterial property of nitrogen doped TiO2 nanoparticles

Nitrogen doped TiO₂ (N-TiO₂) nanoparticles with about 30 nm in size were produced by a sol–gel method and characterized respectively by UV–vis, X-ray diffraction (XRD), Transmission electron microscopy, X-ray photoelectron spectroscopy (XPS). Their photocatalytic antibacterial properties were evaluated by the antibacterial ratio against Escherichia coli in dark and under simulated sunlight respectively. The XRD pattern showed that the doped nano-TiO₂ was mainly composed of anatase phase. The XPS spectra of the N-TiO₂ sample indicated that TiO₂ was doped by nitrogen atom. The nitrogen doping created a new N 2p state slightly above the valence band top consists of O 2p state, and this pushes up the valence band top and decreased the band gap. Which leaded to the absorption edge was red-shifted to the visible light region of UV–vis spectra of nitrogen doped nano-TiO₂ comparing with pure nano-TiO₂. The antibacterial percentage of N-TiO₂ against E. coli reached to 90 % under simulated sunlight for 2 h, which was much better than that in dark, also than that of pure nano-TiO₂. The photo-catalytic antibacterial activity was activated under visible light. The structure and integrity of cell wall and cell membrane were destructed, and even caused the bacteria death.     

Effect of chemical composition and heat treatment condition on microstructure and magnetic properties of nanocrystalline BaDyxFe12−xO19 (x = 0.1, 0.2, 0.3, 0.4) microfibres

A series of BaDy_xFe_12?xO₁₉ ferrite microfibres have been synthesized from metal nitrates and citric acid by the sol–gel method. TG-DSC, XRD, FTIR, FESEM, TEM and VSM were employed to characterize the thermal decomposition process, crystallite sizes, structure and magnetic properties of ferrite microfibres. The effect of calcined temperature, holding time, ion substitution on structure, magnetic properties of barium ferrite microfibres was investigated. The nanoparticle growth mechanism of ferrite microfibres was discussed. The results indicated that the hexaferrite phase was formed at 750 °C and Dy³⁺ ions entered the magnetoplumbite lattice. However, the reflections shift to a lower angle and the characteristic peaks of ferrite microfibres in FTIR shift to the lower wavenumber with the Dy content increasing. The VSM results shown that saturation magnetization (M _s ) gradually increased with calcined temperature increasing and holding time prolonging, while coercive force (H _c ) revealed an increase at first and then decreases. With the Dy content increasing, the M _s achieved values of M _s  = 50 emu?g^?1 (297 K) and 70 emu?g^?1 (77 K) and the H _c value shown a continuous reduction from 515 kA??m^?1 (297 K) and 435 kA?m^?1 (77 K) (x = 0.0) to 242 and 215 kA?m^?1 (x = 0.4).     

Nitrogen‐Doped Carbon Dots: A Facile and General Preparation Method,Photoluminescence Investigation,and Imaging Applications

Carbon dots (Cdots) are an important probe for imaging and sensing applications because of their fluorescence property, good biocompatibility, and low toxicity. However, complex procedures and strong acid treatment are often required and Cdots suffer from low photoluminescence (PL) emission. Herein, a facile and general strategy using carbonization of precursors and then extraction with solvents is proposed for the preparation of nitrogen‐doped Cdots (N‐Cdots) with 3‐(3,4‐dihydroxyphenyl)‐L ‐alanine (L ‐DOPA), L ‐histidine, and L ‐arginine as precursor models. After they are heated, the precursors become carbonized. Nitrogen‐doped Cdots are subsequently extracted into N,N′‐dimethylformamide (DMF) from the carbogenic solid. A core–shell structure of Cdots with a carbon core and the oxygen‐containing shell was observed. Nitrogen has different forms in N‐Cdots and oxidized N‐Cdots. The doped nitrogen and low oxidation level in N‐Cdots improve their emission significantly. The N‐Cdots show an emission with a nitrogen‐content‐dependent intensity and Cdot‐size‐dependent emission‐peak wavelength. Imaging of HeLa cells, a human cervical cancer cell line, and HepG2 cells, a human hepatocellular liver carcinoma line, was observed with high resolution using N‐Cdots as a probe and validates their use in imaging applications and their multicolor property in the living cell system.     

Instant Visual Detection of Picogram Levels of Trinitrotoluene by Using Luminescent Metal–Organic Framework Gel‐Coated Filter Paper

There is an ongoing need for explosive detection strategies to uncover threats to human security including illegal transport and terrorist activities. The widespread military use of the explosive trinitrotoluene (TNT) for landmines poses another particular threat to human health in the form of contamination of the surrounding environment and groundwater. The detection of explosives, particularly at low picogram levels, by using a molecular sensor is seen as an important challenge. Herein, we report on the use of a fluorescent metal–organic framework hydrogel that exhibits a higher detection capability for TNT in the gel state compared with that in the solution state. A portable sensor prepared from filter paper coated by the hydrogel was able to detect TNT at the picogram level with a detection limit of 1.82 ppt (parts per trillon). Our results present a simple and new means to provide selective detection of TNT on a surface or in aqueous solution, as afforded by the unique molecular packing through the metal–organic framework structure in the gel formation and the associated photophysical properties. Furthermore, the rheological properties of the MOF‐based gel were similar to those of a typical hydrogel.     

Coordination of extraframework Li+ cation in the MCM-22 and MCM-36 zeolite: FTIR study of CO adsorbed

Nature and population of Li⁺ cationic sites in MCM-22 zeolite and its pillared form (MCM-36) were investigated by means of adsorption of CO as a probe molecule. CO stretching frequency and adsorption heat were measured by FTIR spectroscopy and adsorption microcalorimetry. Intrazeolitic carbonyl complexes on Li⁺ cations in MCM-22 and MCM-36 are characterized by two main vibrational bands at 2,195 and 2,188 cm^?1. Band at higher wavenumbers is ascribed to carbonyls on Li⁺ ions coordinated only to two oxygen atoms at the intersection of 10-ring channels and interacting with CO molecule by energy around 45 kJ mol^?1. Band at 2,188 cm^?1 was assigned to the carbonyls on Li⁺ cations located on top of 5 or 6-rings on the channel walls and coordinated to three or four oxygen atoms, interacting with CO molecule by energy 33–36 kJ mol^?1. Effect of pillaring and layered form of zeolite on nature and population of Li⁺ cationic sites is also discussed, as well as the formation of dicarbonyl complexes.     

Adsorption and desorption of toluene on nanoporous TiO2/SiO2 prepared by atomic layer deposition (ALD): influence of TiO2 thin film thickness and humidity

Adsorption and desorption of toluene on bare and TiO₂-coated silica with a mean pore size of 15 nm under dry and humid conditions were studied using toluene breakthrough curves and temperature programmed desorption (TPD) of toluene and CO₂. Two TiO₂/silica samples (either partially or fully covered with TiO₂) were prepared with 50 and 200 cycles of TiO₂ atomic layer deposition (ALD), respectively. The capacity of silica to adsorb toluene improved significantly with TiO₂-thin film coating under dry conditions. However, toluene desorption from the surface due to displacement by water was more pronounced for TiO₂-coated samples than bare samples under humid conditions. In TPD experiments, silica with a thinner TiO₂ film (50-ALD cycled) had the highest reactivity for toluene oxidation to CO₂ both in the absence and presence of water. Toluene adsorption and oxidation reactivity of silica can be controlled by modifying the silica surface with small amount of TiO₂ using ALD.     

Gadolinium(III)‐Hydroxy Ladders Trapped in Succinate Frameworks with Optimized Magnetocaloric Effect

Two kinds of inorganic gadolinium(III)‐hydroxy “ladders”, [2×n] and [3×n], were successfully trapped in succinate (suc) coordination polymers, [Gd₂(OH)₂(suc)₂(H₂O)]_n ? 2n H₂O ( 1 ) and [Gd₆(OH)₈(suc)₅(H₂O)₂]_n ? 4n H₂O ( 2 ), respectively. Such coordination polymers could be regarded as alternating inorganic–organic hybrid materials with relatively high density. Magnetic and heat capacity studies reveal a large cryogenic magnetocaloric effect (MCE) in both compounds, namely (ΔH=70 kG) 42.8 J kg^?1 K^?1 for complex 1 and 48.0 J kg^?1 K^?1 for complex 2 . The effect of the high density is evident, which gives very large volumetric MCEs up to 120 and 144 mJ cm^?3 K^?1 for complexes 1 and 2 , respectively.     

Strong Morphological Effect of Mn3O4 Nanocrystallites on the Catalytic Activity of Mn3O4 and Au/Mn3O4 in Benzene Combustion

Gold nanoparticles (3–4 nm) were deposited on Mn₃O₄ nanocrystallites with three distinct morphologies (cubic, hexagonal, and octahedral). The resulting structures were characterized, and their activities for benzene combustion were evaluated. The dominant exposed facets for the three kinds of Mn₃O₄ polyhedrons show the activity order: (103)≈(200)>(101). A similar activity order was derived for the interfaces between the Au and the Mn₃O₄ facet: Au/(200)≈Au/(103)>Au/(101). The metal–support interactions between the Au nanoclusters and specific facets of the Mn₃O₄ polyhedrons lead to a unique interfacial synergism in which the electronic modification of the Au nanoparticles and the morphology of the Mn₃O₄ substrate have a joint effect that is responsible for a significant enhancement in the catalytic activity of the Au/Mn₃O₄ system.     

Ultrasound‐Assisted Construction of Halogen‐Bonded Nanosized Cocrystals That Exhibit Thermosensitive Luminescence

Multi‐component organic nanocrystals that are comprised of two or more supramolecular building blocks can be used to extend the design and assembly scope of solid molecular materials. Herein, we report the use of ultrasonication to prepare halogen‐bonded stilbene‐based nano‐cocrystals that exhibit different photoemission properties, including one‐ and two‐phonon emission and fluorescence lifetimes, relative to those of macrodimensional crystals. The structural transformation from nano‐cocrystals into nanocrystals upon heating results in a luminescence red‐shift from greenish blue to yellow. The temperature‐dependent ratiometric luminescence may allow such nano‐cocrystals to be used as fluorescent sensors and thermosensitive materials.