Buildup mechanism of carboxymethyl cellulose and chitosan self-assembled films

Films with different numbers of layers have been built by alternating the adsorption of carboxymethyl cellulose (CMC) and chitosan (CHI) at different pH levels. The adsorption process was recorded by quartz crystal microbalance (QCM). The results showed that under all pH conditions considered, the growth of the films is nonlinear. The film construction performed at pH 4.0 (preferred assembly pH) with different numbers of bilayers (CMC/CHI as one bilayer) was also observed step by step by atomic force microscopy (AFM). Comparing the growth process from QCM with the surface morphological changes from AFM shows the existence of an inhomogeneous structure for the first nine bilayers, and, after a coalescence of islands, an increase in the number of bilayers was demonstrated. The possible growth mechanism was also evaluated.     

Li+掺杂对Y2SiO5:Pr3+上转换发光性能影响

采用溶胶-凝胶法制备Li+掺杂改性的Y2SiO5:Pr3+上转换发光材料,考察了Li+掺杂对样品晶型及发光性能的影响。采用XRD,DSC-TGA,FS对所制备的材料进行表征,结果表明Li+掺入浓度在7%～8%(摩尔分数)之间会引起Y2SiO5晶体类型由X1型转变为X2型,且Li+掺入后样品转晶型温度由950℃降至800℃;样品经800℃煅烧处理后以X1型Y2SiO5为主相,850℃煅烧处理后以X2型Y2SiO5为主相;Li+掺入同时会提高Y2SiO5:Pr3+材料的上转换发光强度,Li+最佳掺杂浓度为10%,对于双掺杂Pr3+,Li+:Y2SiO5体系中Pr3+最佳掺杂浓度为1.2%。     

Conductive 2D Metal-organic Framework (Co,NiCo, Ni) Nanosheets for Enhanced Non-enzymatic Detection of Urea

2D metal-organic framework (MOF) has potential applications in electrocatalysis owing to fast mass transfer, charge transfer and large specific surface area. Here, we had prepared three conductive 2D MOF based on Ni, NiCo and Co in a simple and rapid way. The 2D nanostructure of MOF was confirmed by SEM and TEM. The chemical composition was studied by XRD, Raman and XPS spectrum. The electrochemical oxidation and detection was investigated through cyclic voltammetry and current-time method. Their sensing performance for urea was determined by varying oxidation potentials and metal sites. The non-enzymatic Ni-, NiCo- and Co-MOF sensors had good catalytic activity for urea. Compared with NiCo- and Co-MOF, Ni-MOF had a wider linear range (0.5–832.5 μM), high sensitivity (1960 μA mM⁻¹ cm⁻²), low detection limit (0.471 μM), and fast response time. The sensors had well repeatability, reproducibility, and selectivity to specific interfering species. Furthermore, Ni- and NiCo-MOF modified electrode was also applied to detection of milk samples. The results showed that the recovery was satisfactory, which further confirmed the effectiveness of non-enzyme sensor. In general, the highly-sensitive 2D Ni- and NiCo-MOF modified electrode has great potential as nonenzymatic urea sensors for real samples detection in hydrogen energy, clinical diagnostics, and environmental protection, et al.     

Hydrochromic CsPbBr3 Nanocrystals for Anti‐Counterfeiting

Hydrochromic materials that can reversibly change color upon water treatment have attracted much attention owing to their potential applications in diverse fields. Herein, for the first time, we report that space‐confined CsPbBr₃ nanocrystals (NCs) are hydrochromic. When CsPbBr₃ NCs are loaded into a porous matrix, reversible transition between luminescent CsPbBr₃ and non‐luminescent CsPb₂Br₅ can be achieved upon the exposure/removal of water. The potential applications of hydrochromic CsPbBr₃ NCs in anti‐counterfeiting are demonstrated by using CsPbBr₃ NCs@mesoporous silica nanospheres (around 100 nm) as the starting material. Owing to the small particle size and negatively charged surface, the as‐prepared particles can be laser‐jet printed with high precision and high speed. We demonstrate the excellent stability over repeated transformation cycles without color fade. This new discovery may not only deepen the understanding of CsPbX₃, but also open a new way to design CsPbX₃ materials for new applications.     

Isoperimetric Constants of Infinite Plane Graphs

   Abstract. Let G be an infinite locally finite plane graph with one end and let H be a finite plane subgraph of G . Denote by a(H) the number of finite faces of H and by l(H) the number of the edges of H that are on the boundary of the infinite face or a finite face not in H . Define the isoperimetric constant h (G) to be inf _H l(H) / a(H) and define the isoperimetric constant h (δ) to be inf _G h (G) where the infimum is taken over all infinite locally finite plane graphs G having minimum degree δ and exactly one end. We establish the following bounds on h (δ) for δ ≥ 7 :

Determination of cadmium with a sequential injection lab-on-valve by anodic stripping voltammetry using a nafion coated bismuth film electrode

This work exploited a sequential injection lab-on-valve (LOV) system for the determination of cadmium by anodic stripping voltammetry (ASV). A miniaturized electrochemical flow cell (EFC) was fabricated in LOV, in which a nafion coated bismuth film electrode was used as working electrode. The cadmium was electrodeposited on the electrode surface in bismuth solution, and measured with the subsequential stripping scan. Under optimal conditions, the proposed system responded linearly to cadmium concentrations in a range 2.0-100.0 μg L⁻¹. The detection limit of this method was found to be 0.88 μg L⁻¹. By loading a sample volume of 800 μL, a sampling frequency of 22 determinations h⁻¹ was achieved. The repeatability expressed as relative standard derivation (R.S.D.) was 3.65% for 20 μg L⁻¹ cadmium (n = 11). The established method was applied to analysis of trace cadmium in environmental water samples and the spiked recoveries were satisfactory.     

四阶微分方程三点边值问题三个正解的存在性

在四阶微分方程非线性项f中含有未知函数“的二阶导数u”的情况下,运用Avery-Peterson不动点定理,研究了一类四阶微分方程三点边值问题三个正解的存在性,得到了该类边值问题存在三个正解的充分条件．     

降低聚氯乙烯膜黄连素选择性电极检出限的新方法

PVC药物选择性电极的检出限主要是由膜中活性物质的溶解和内参比溶液中被测离子在膜中的迁移所决定的。为了减少这两种不利因素的影响 ,采用内参比为含可乐定的氯化钠溶液的可乐定选择性电极测定黄连素。测定的线性范围为 1.0× 10 - 4～ 1.0× 10 - 8mol L ,平均斜率为 5 8.6mV decade ;检出下限为 2 .5×10 - 9mol L ,比已报道的检出下限要低 2～ 3个数量级。电极的选择性明显提高 ,选择性系数的测定更加可靠真实 ,并获得良好的重现性和稳定性。以标准加入法测定回收率 ,结果令人满意。     

Label-free colorimetric aptasensor for sensitive detection of ochratoxin A utilizing hybridization chain reaction

The combination of high selectivity of aptamer with the peroxidase-mimicking property of DNAzyme has presented considerable opportunities for designing colorimetric aptasensor for detection of ochratoxin A (OTA). The activities of both aptamer (as biorecognition element) and DNAzyme (as signal amplification element) are blocked via base pairing in the hairpin structure. Hybridization chain reaction (HCR) between two hairpin DNAs was employed to further improve the sensitivity of this method. The presence of OTA triggers the opening of the hairpin structure and the beginning of HCR, which results in the release of many DNAzyme, and generates enhanced colorimetric signals, which is correlated to the amounts of OTA with linear range between 0.01 to 0.32 nM, and the limit of detection is 0.01 nM under optimal conditions. OTA in yellow rice wine and wheat flour samples was also detected using this method. We demonstrate that a new colorimetric method for the detection of OTA has been established, which is simple, easy to conduct, label-free, sensitive, high throughput, and cost-saving.