类Kerr介质中双模SU(1,1)相干态场与Λ型三能级原子相互作用的量子统计性质

导出了类Kerr介质中双模SU(1,1)相干态场与Λ型三能级原子相互作用系统的态函数,研究了Kerr效应对Λ型三能级原子布居概率、双模SU(1,1)相干态场的互关联函数、Cauchy-Schwartz不等式及二阶相干度的影响.结果表明:Kerr效应使原子与光场的耦合减弱,原子布居的崩塌与复苏的周期缩短;在初始光场较弱和较强两种情况下,类Kerr介质对双模SU(1,1)相干态场两模间的相关性、相关程度以及光子的聚束与反聚束效应产生的作用有明显的区别.     

激光溅射Ni等离子体与气相CH3OH团簇的反应

用激光溅射 分子束技术研究了气相中Ni的等离子体与甲醇分子团簇的反应 .观察到Ni+ (CH3 OH) n、NiO+ (CH3 OH) n、H+ (CH3 OH) n、H3 O+ (CH3 OH) n 四个种类的团簇正离子和CH3 O-(CH3 OH) n(n≤ 2 5 )一种团簇负离子 .详细考察了激光烧蚀等离子体作用于脉冲分子束的不同位置时 ,对团簇产物种类和团簇尺寸大小的影响 .发现NiO+ (CH3 OH) n 是由Ni+ (CH3 OH) n 团簇内的脱甲烷反应生成的 ,而H+ (CH3 OH) n、H3 O+ (CH3 OH) n主要是激光等离子体中的电子与甲醇团簇碰撞电离产生的     

A duality relation for busy cycles inGI/G/1 queues

Using a generalization of the classical ballot theorem, Niu and Cooper [7] established a duality relation between the joint distribution of several variables associated with the busy cycle inM/G/1 (with a modified first service) and the corresponding joint distribution of several related variables in its dualGI/M/1. In this note, we generalize this duality relation toGI/G/1 queues with modified first services; this clarifies the original result, and shows that the generalized ballot theorem is superfluous for the duality relation.     

SHS等离子喷涂制备FeAl2O4-Al2O3-Fe纳米复合涂层的研究

利用SHS等离子喷涂技术,将经过机械团聚法制备的Fe2O3-Al复合粉体送入等离子焰流,沉积出厚度约为400 μm的复合涂层.利用XRD,SEM 和TEM等检测手段对涂层的成分和组织进行了分析,测定了涂层的显微硬度、断裂韧性以及耐磨性.结果表明涂层为具有纳米结构的FeAl2O4-Al2O3-Fe纳米复合组织;涂层的显微硬度为HV100g870;断裂韧性是普通Al2O3涂层的2倍;无润滑磨损的耐磨性是普通Al2O3涂层的2.5倍.     

Titanium carbonitride films on cemented carbide cutting tool prepared by pulsed high energy density plasma

Hard films prepared by pulsed high energy density plasma (PHEDP) are characterized by high film/substrate adhesive strength, and high wear resistance. Titanium carbonitride (TiCN) films were deposited onto YG11C (ISO G20) cemented carbide cutting tool substrates by PHEDP at room temperature. XRD, XPS, SEM, AES, etc. were adopted to analyze the phases (elements) composition, microstructure and the interface of the films, respectively. The results show that, the uniform dense films are composed of grains ranging from 70 to 90 nm. According to the AES result, there is a broad transition layer between the film and the substrate, due to the ion implantation effect of the PHEDP. The transition layer is favorable for the film/substrate adhesion.     

方位伺服系统扭转振动固有频率的分析

本文阐述了伺服系统结构设计中估算系统固有频率的必要性,介绍了一种分析和计算经纬仪方位伺服系统扭转振动固有频率的方法。     

DIELS-ALDER REACTIONS OF FURAN WITH DIENOPHILES CATALYZED BY YbCl3

The yield and stereoselectivity of the Diels-Alder reactions between furan(or 2-methylfuran)and different dienophiles are markedly enhanced by the catalysis of anhydrous YbCl₃.     

Melting behaviors,crystallization kinetics,and spherulitic morphologies of poly(butylene succinate) and its copolyester modified with rosin maleopimaric acid anhydride

This article investigated the melting behaviors, crystallization kinetics, and spherulitic morphologies of poly(butylene succinate) (PBS) and its copolyester (PBSR) modified with rosin maleopimaric acid anhydride, using wide‐angle X‐ray diffraction, differential scanning calorimeter (DSC), and polarized optical microscope. Subsequent DSC scans of isothermally crystallized PBS and PBSR exhibited two melting endotherms, respectively, which was due to the melt‐recrystallization process occurring during the DSC scans. The equilibrium melting point of PBSR (125.9 °C) was lower than that of PBS (139 °C). The commonly used Avrami equation was used to describe the isothermal crystallization kinetics. For nonisothermal crystallization studies, the model combining Avrami equation and Ozawa equation was employed. The result showed a consistent trend in the crystallization process. The crystallization rate was decreased, the perfection of crystals was decreased, the recrystallization was reduced, and the spherulitic morphologies were changed when the huge hydrogenated phenanthrene ring was added into the chain of PBS. The activation energy (ΔE) for the isothermal crystallization process determined by Arrhenius method was 255.9 kJ/mol for PBS and 345.7 kJ/mol for PBSR. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 900–913, 2006