哺乳期母婴微量元素含量的干预研究

通过对陕西省西安地区营养正常的母婴进行干预试验,研究了在其饮食习惯下,哺乳期母婴体内锌、铁、钙三种必需元素的代谢情况,以及是否需要补充,给予适当的补充是否有害。     

FCC硫转移剂MgAlCuFe复合氧化物的结构与性能:金属盐前体的影响

分别以硝酸盐、盐酸盐和硫酸盐为金属盐前体,采用共沉淀法合成了MgAlCuFe类水滑石前驱体,经过700℃焙烧6h后,制得三种新型FCC硫转移剂.运用X射线衍射、热重、氮气吸附和红外光谱对这三种硫转移剂的结构和性能进行了表征,并采用改装的WRP-3热重天平评价了其氧化吸硫和还原脱硫的性能.结果表明,三种金属盐均可得到结构规整的类水滑石前驱体,经过焙烧后得到复合氧化物MgAlCuFe.与采用盐酸盐和硫酸盐作前体相比,由硝酸盐制得的硫转移剂具有较大的比表面积,其饱和吸附硫容和氧化吸硫速率均较高,6min可达到1.54g/g的饱和吸附能力,同时具有较强的还原脱硫能力.     

A simple and general method for the synthesis of multicomponent Na2V6O16.3H2O single-crystal nanobelts

Multicomponent Na2V6O16.3H2O (barnesite) single-crystalline nanobelts were synthesized by a direct reaction-crystallization growth of bulk V2O5 and NaF powders under hydrothermal treatment without using any templates or catalysts. This new strategy could be extended to prepare other one-dimensional multicomponent nanomaterials including ammonium, alkali-metal or alkali-earth metal vanadium oxide bronzes and other transition metal oxyfluorides. This is an efficient and mild solution method with clear advantages over the traditional high-temperature approach for the large-scale production of 1D multicomponent nanomaterials. The applicability of this approach toward the preparation of other inorganic systems, such as tungstates and molybdates, will be explored.     

Synthesis of Imidazo[2,1‐a]isoquinolines from α‐Tosyloxyketones and 1‐Aminoisoquinoline in Ionic Liquid Solvent

The room temperature ionic liquid n‐butylpyridinium tetrafluoroborate (BPyBF₄) is used as a ‘green’ recyclable alternative to classical molecular solvents for the cyclocondensation of α‐tosyloxyketones with 1‐aminoisoquinoline to prepare imidazo[2,1‐a]isoquinolines in good yields.     

邻羟基二苯甲酮类紫外吸收剂离解常数的测定

本工作对两种常见的商品紫外吸收剂——2-羟基-4-甲氧基二苯甲酮(UV-9)和2,4-二羟基二苯甲酮(UV-0)在基态和激发态时的离解常数进行了测定。对UV-0存在着反常的吸收强度和pH关系曲线作了合理的解释, 并结合测得的离解常数对上述紫外吸收剂耗失能量的机理进行了讨论。     

含噻二唑环苯甲酰脲化合物的合成及杀虫活性

用活性亚结构连接法设计合成了6个新的含1，3，4-噻二唑杂环苯甲酰脲类化合物，其结构经红外光谱、核磁氢谱、元素分析方法确证。同时对其杀虫活性进行了初步研究，发现该类化合物在普筛浓度下对淡色库蚊幼虫具有较好的杀虫活性。化合物Ⅲb(R1=Cl,R2=n-C5H11),Ⅲd(R1=CH3,R2=n-C5H11),Ⅲf(R1=2,6-difluoro,R2=-C5H11)在10mg/L浓度下对淡色库蚊幼虫的杀虫死亡率大于90％。     

Preparation and characterization of nitrogen-doped TiO2 photocatalyst in different acid environments

Nitrogen-doped TiO₂ powders were successfully prepared by a wet method, i.e., a micro-emulsion-hydrothermal method, in different acid environments. Several characterization techniques, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance spectra, were combined to determine the crystal phase, concentration and chemical states of the nitrogen doped in TiO₂. The high photocatalytic activity of the nitrogen-doped TiO₂ was evaluated through the decomposition of rhodanmine B under visible light irradiation. It was suggested that the doped nitrogen formed oxynitride (NO) and produced impurity states at higher above the valence band of TiO₂. Therefore, the nitrogen doping could enhance the response of photocatalyst to the visible light and improve the photocatalytic activity because of the narrowing of band gap of TiO₂.     

Dynamic Study of Gemini Surfactant and Single-chain Surfactant at Air／Water Interface

Molecular dynamics (MD) simulation are used to study the properties of gemini surfactant of ethyl-α,ω-bis(dodecyldimethylammonium bromide) (C12C2C12) and dodecyl-trimethylammonium bromide (DTAB) at the air/water interface, respectively. In the two systems,t he surfactant concentrations are both 28 wt.%, and other conditions are also the same. After reaching the thermodynamic equilibrium, the concentration profiles, the radial distributions functions (RDF) and the mean squared displacement (MSD) are investigated. The results reveal that the surface activity of C12C2C12 surfactant is higher than DTAB surfactant.     

蝎型钒氧配合物的合成、结构及量子化学研究

设计合成了两种新型的以聚类吡唑硼酸盐为配体的钒氧配合物VO(acac)[HB(pz)3](1)和VO(acac)[HB(3,5-Me2pz)3]·CH3CN(2). 运用元素分析、 红外光谱和紫外光谱对所合成的配合物进行了表征, 并用X射线衍射测定了它们的晶体结构. 同时, 采用量子化学的Hartree Fock方法和自然轨道分析方法(NBO), 使用3-21G*(6d, 7f)基组计算得到了两个分子体系的分子轨道、原子电荷以及键级, 并对其结构进行了分析.     

Direct melting polycondensation and characterization of poly(ɛ-caprolactone-co-lactic acid)

A kind of biodegradable material, poly(ɛ-caprolactone-co-lactic acid) [P(CL-co-LA)] was synthesized via the direct melting polycondensation of lactic acid (LA) and ɛ-caprolactone (CL). The influences of the polycondensation time, and the catalyst type on the intrinsic viscosity of P(CL-co-LA) were also investigated. The results indicate that P(CL-co-dl-LA), with an intrinsic viscosity of 0.4733 dL/g, can be prepared by direct melting polycondensation with the molar ratio LA/CL = 3:7 at 180°C and 70 Pa for 12 h, using 0.5% (mass fraction) of SnCl₂ as the catalyst. Compared with lactide ring-opening polycondensation (ROP), the direct melting polycondensation of LA and CL is more practicable and simple. Translated from Journal of South China University of Technology, 2006, 34(7): 7–11 (in Chinese)