Electro-optically Q-switched Nd:YVO4 slab laser with a high repetition rate and a short pulse width

We report on a compact and highly efficient diode-end-pumped TEM00 Nd:YVO4 slab laser with an output power of 103 W and beam quality M2 < or = 1.5. The optical-to-optical efficiency was 41.5%. In electro-optically Q-switched operation, 83 W of average power at a pulse-repetition rate of 50 kHz with a pulse length of 11.3 ns was obtained. At a pulse-repetition rate of 10 kHz, 5.6 mJ of pulse energy, and 870 kW of peak power were measured.     

Electro-optically controlled efficiencies in a QPM coupled parametric process

We present a method for controlling the efficiencies of frequency doubling and frequency tripling in a QPM coupled parametric process based on the electro-optic effect. The numerically simulated results verify that this method is feasible and very efficient for controlling the energy exchange from the fundamental wave to the harmonic waves at any fundamental intensity. In terms of efficiencies controlled by the electro-optic effect, the asymmetric duty-cycle periodic structure is more reasonable than the symmetric one. In addition, we also show that electro-optic control is significantly better than temperature control.     

The shock formation distance in a bounded sound beam of finite amplitude

This paper investigates the shock formation distance in a bounded sound beam of finite amplitude by solving the Khokhlov-Zabolotskaya-Kuznetsov (KZK) equation using frequency-domain numerical method. Simulation results reveal that, besides the nonlinearity and absorption, the diffraction is another important factor that affects the shock formation of a bounded sound beam. More detailed discussions of the shock formation in a bounded sound beam, such as the waveform of sound pressure and the spatial distribution of shock formation, are also presented and compared for different parameters.     

Dissipative flow and vortex shedding in the Painlevé boundary layer of a Bose-Einstein condensate

This paper addresses the drag force and formation of vortices in the boundary layer of a Bose-Einstein condensate stirred by a laser beam following the experiments of Phys. Rev. Lett. 83, 2502 (1999)]. We make our analysis in the frame moving at constant speed where the beam is fixed. We find that there is always a drag around the laser beam. We also analyze the mechanism of vortex nucleation. At low velocity, there are no vortices and the drag has its origin in a wakelike phenomenon: This is a particularity of trapped systems since the density gets small in an extended region. The shedding of vortices starts only at a threshold velocity and is responsible for a large increase in drag. This critical velocity for vortex nucleation is lower than the critical velocity computed for the corresponding 2D problem at the center of the cloud.     

Observation of microwave-induced zero-conductance state in Corbino rings of a two-dimensional electron system

Using Corbino samples we have observed oscillatory dc conductance in a high-mobility two-dimensional electron system when it is subjected to crossed microwave and magnetic fields. At the strongest of the oscillation minima the conductance is found to be vanishingly small, indicating a macroscopic insulating state associated with this minimum. With increasing voltage bias, a crossover from Ohmic to electron-heating regime is observed.     

Observation of geometric phases for mixed states using NMR interferometry

Examples of geometric phases abound in many areas of physics. They offer both fundamental insights into many physical phenomena and lead to interesting practical implementations. One of them, as indicated recently, might be an inherently fault-tolerant quantum computation. This, however, requires one to deal with geometric phases in the presence of noise and interactions between different physical subsystems. Despite the wealth of literature on the subject of geometric phases very little is known about this very important case. Here we report the first experimental study of geometric phases for mixed quantum states. We show how different they are from the well-understood, noiseless, pure-state case.     

Silicon nanowires grown from Au-coated Si substrate

Amorphous Si nanowires were grown on an Au-coated Si substrate by heat treatment at 1000 °C under an H₂ atmosphere. The nanowires have a length of several tens of a micron and a diameter of 10–20 nm. The growth mechanism of the nanowires was investigated and explained with a solid–liquid–solid model. Received: 11 July 2002 / Accepted: 7 July 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +86/10-62751615, E-mail: yudp@pku.edu.cn     

Optical properties of SrTiO<Subscript>3</Subscript> thin films by pulsed laser deposition

SrTiO₃ thin films were prepared on a fused-quartz substrate by pulsed laser deposition (PLD). Dense and homogeneous films with a thickness of 260 nm were prepared. Optical constants (refractive index n and extinction coefficient k) were determined from the transmittance spectra using the envelope method. The optical band gap energy of the films was found to be 3.58 eV, higher than the 3.22 eV for bulk SrTiO₃, attributable to the film stress exerted by the substrate. The dispersion relation of the refractive index vs. wavelength follows the single electronic oscillator model. The refractive index and the packing density for the PLD-prepared SrTiO₃ thin films are higher than those for the SrTiO₃ films prepared by physical vapor deposition, sol–gel and RF sputtering. Received: 18 March 2002 / Accepted: 7 October 2002 / Published online: 8 January 2003 RID="*" ID="*"Corresponding author. Fax: +86-25/359-5535, E-mail: mszhang@nju.edu.cn     

“锥形嵌套"结构CNx纳米管的生长机理及拉曼光谱研究

在氮气、氢气以及氯化铵热解产生的氨气环境下,以钴作为催化剂,在780℃—940℃温度范围内使二甲苯与二茂铁受热分解,合成了CNx纳米管.在高分辨率透射电子显微镜下观察,合成的纳米管呈现“锥形嵌套”的形貌特征.从不同结构的分子面形成能的角度探讨了CNx纳米管的催化生长机理.不同温度下所制备样品的拉曼光谱研究表明,ID/IG值可以反映氮的掺杂所带来的纳米管结晶有序程度的降低,并通过G带向高波数移动证实了氮的掺杂.     

A phosphine-catalyzed [3+2] cycloaddition strategy leading to the first total synthesis of (-)-hinesol

In one step, the skeleton of cis-spirovetivanes was constructed with high stereoselectivity by the phosphine-catalyzed [3+2] cycloaddition reaction of tert-butyl 2,3-butadienoate or 2-butynoate with 3-methyl-2-methylenecyclohexanone (5). This method was exemplified by the first highly efficient total synthesis of natural product (-)-hinesol, which is an active ingredient of cerebral circulation and metabolism improvers.