Physico-chemical Characterization of Mo-Hβ Zeolite Catalysts

A series of Mo-impregnated Hβ samples, with MoO3 loading in Hβ zeolite in the mass fraction range of 0. 5%-6.0%, were studied by means of XRD and IR in order to characterize their structures. Mo/Hβ sampies‘ crystallinity almost linearly decreases with increasing the amount of MoO3 loaded, The IR spectra and XRD patterns suggest that the progressive destabilization of the Hβ zeolite structure is caused by increasing Mo loading in (MoO3 Hβ zeolite). During the calcination, Al2(MoO4)3 formed from the dealumination of Hβ zeolite, causes the substantially partial breakdown of the zeolite framework when the Mo loading in MoO3 Hβ is relatively high.     

GLOBAL EXISTENCE OF WEAK SOLUTIONS TO THE NON-ISOTHERMAL NEMATIC LIQUID CRYSTALS IN 2D

In this article, we prove the global existence of weak solutions to the nonisothermal nematic liquid crystal system on T2, on the basis of a new approximate system which is different from the classical Ginzburg-Landau approximation. Local in space energy inequalities are employed to recover the estimates on the second order spatial derivatives of the director fields locally in time, which cannot be derived from the basic energy balance.It is shown that these weak solutions satisfy the temperature equation, and also the total energy equation but away from at most finite many "singular" times, at which the energy concentration occurs and the director field losses its second order derivatives.     

刺激响应型聚合物前药

前药(prodrug)是一类经过生物体内转化后才具有药理作用的化合物。与传统纳米药物输送系统相比具有载药率确定、稳定性高、爆释现象小等优点。但是,前药本身也面临着可控性,特异性释药不足而引起效果不佳等问题。因此,能够靶向病灶部位并能够针对病灶部位进行特异性释药的刺激敏感型前药受到广泛研究。本文以国内外学者及本课题组的研究成果为基础,以肿瘤部位特殊的生理环境为背景,综述了近年来pH敏感、温敏、氧化还原敏感、酶敏感等生物刺激响应型抗肿瘤聚合物前药的研究进展。     

Ni/TPC催化剂的制备、表征及在秸秆热解燃气重整中的应用

以废弃汽车外轮胎热解后的副产物轮胎热解焦（Tyre pyrolysis char，TPC）为原料，利用均匀沉淀法制备以轮胎焦为载体的负载型Ni/TPC催化剂，采用EDX、SEM、XRD、TG、BET手段对催化剂进行了表征与分析，同时使用管式炉测试了Ni/TPC催化剂在秸秆热解燃气重整中的催化性能，并考察了热解温度、保温时间、镍负载量及催化时间对秸秆热解燃气重整效果的影响。研究结果表明，TPC富含焦和金属，Ni/TPC催化剂分散均匀，热稳定性好，比表面积为62 m²/g。催化剂活性测试显示，Ni/TPC催化剂用于作物秸秆热解燃气重整具有很强的催化活性，可显著提高燃气中可燃气体含量；热解温度在750℃、保温时间10 min、30%的Ni负载量时Ni/TPC催化剂的催化效率最高，连续使用850 min后，燃气中的H₂含量仍相对提高到50%以上，长时间使用后活性结构由Ni₃ZnC_0.7转变成FeNi₃，催化活性依然较强且趋于稳定，TPC可以作为良好的新型镍基催化剂载体。     

通过宽线固体核磁共振氢谱研究半晶高分子的相结构

宽线固体核磁共振氢谱（¹H NMR）是一种研究半晶高分子相结构的经典方法.本文以半晶聚乙烯的宽线固体¹H NMR谱为例，探讨了通过Gaussian/Sinc、Gaussian和Lorentzian函数组合对宽线固体¹H NMR谱图进行拟合的方案，并根据半晶聚乙烯的相结构成分对拟合得到的各信号成分进行归属.并在此基础上探讨了各个相结构中分子链运动与信号线型的相关性，以及利用宽线固体¹H NMR谱测量半晶高分子结晶度存在的困难.     

Synthesis,properties and mechanism of photodegradation of core–shell structured upconversion luminescent NaYF4:Yb3+,Er3+@BiOCl

Microspherical bismuth oxychloride (BiOCl) can only utilize ultraviolet (UV) light to promote photocatalytic reactions. To overcome this limitation, a uniform and thin BiOCl nanosheet was synthesized with a particle size of about 200 nm. As results of UV–visible diffuse reflectance spectroscopy showed, the band gap of this nanostructure was reduced to 2.78 eV, indicating that the BiOCl nanosheet could absorb and utilize visible light. Furthermore, the upconversion material NaYF₄ doped with rare earth ions Yb³⁺ and Er³⁺ emitted visible light at 410 nm following excitation with near‐infrared (NIR) light (980 nm), which could be utilized by BiOCl to produce a photocatalytic reaction. To produce a high‐efficiency photocatalyst (NaYF₄:Yb³⁺,Er³⁺@BiOCl), BiOCl‐loaded NaYF₄:Yb³⁺,Er³⁺ was successfully synthesized via a simple two‐step hydrothermal method. The as‐synthesized material was confirmed using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy as well as other characterizations. The removal ratio of methylene blue by NaYF₄:Yb³⁺,Er³⁺@BiOCl was much higher than that of BiOCl alone. Recycling experiments verified the stability of NaYF₄:Yb³⁺,Er³⁺@BiOCl, which demonstrated excellent adsorption, strong visible‐light absorption and high electron–hole separation efficiency. Such properties are expected to be useful in practical applications, and a further understanding of the NIR‐light‐responsive photocatalytic mechanism of this new catalytic material would be conducive to improving its structural design and function.     

Preparation and solution properties of a novel cationic hydrophobically modified polyacrylamide for enhanced oil recovery

Abstract

A novel cationic water-soluble monomer allyldimethylisooctylammonium bromide (ADIAB) containing a short-chain alkane was synthesized successfully. This monomer was copolymerized with acrylamide and sodium acrylate to produce hydrophobically modified polyacrylamide (HMPAM) using solution polymerization without surfactants. The structures of monomer ADIAB and HMPAM were characterized with infrared spectroscopy and nuclear magnetic resonance spectroscopy. Influence of preparation condition on viscosities of products was studied. The aqueous solution viscosity of the terpolymer was also investigated as functions of concentration, temperature and salinity. The results showed that when the temperature exceeds the 60?°C and NaCl concentration exceeds about 2000?mg/L, the temperature and salt tolerance characters of terpolymer were demonstrated. The enhanced oil recovery tests were initially carried out using homogeneous sandpack models.     

基于衣康酸配体构筑的两个锌配合物的合成、结构和荧光性质

通过水热法合成了两种锌配位聚合物{[Zn(ic)(bip)]·2H₂O}n (1)和[Zn(ic)(bpe)]n (2)(H₂ic=衣康酸,bip=3,5-二(1-咪唑基)吡啶,bpe=1,2-二(4-吡啶基)乙烯),并通过X射线单晶衍射和元素分析对其结构进行了表征.配合物1和2均为含有一维金属-羧酸链的二维(4,4)格子层结构.此外,对它们的热重、粉末X射线衍射和固体荧光性能进行了考察.与配体bip相比,1的发射光谱发生了明显的蓝移(~78 nm),可能归因于配体到金属的电荷转移;2显示与游离的bpe配体相似的荧光性质,轻微的红移可能是因为与金属离子之间的配位作用导致的.