Enriched Surface Oxygen Vacancies of Photoanodes by Photoetching with Enhanced Charge Separation

A facile photoetching approach is described that alleviates the negative effects from bulk defects by confining the oxygen vacancy (O_vac) at the surface of BiVO₄ photoanode, by 10‐minute photoetching. This strategy could induce enriched O_vac at the surface of BiVO₄, which avoids the formation of excessive bulk defects. A mechanism is proposed to explain the enhanced charge separation at the BiVO₄ /electrolyte interface, which is supported by density functional theory (DFT) calculations. The optimized BiVO₄ with enriched surface O_vac presents the highest photocurrent among undoped BiVO₄ photoanodes. Upon loading FeOOH/NiOOH cocatalysts, photoetched BiVO₄ photoanode reaches a considerable water oxidation photocurrent of 3.0 mA cm^?2 at 0.6 V vs. reversible hydrogen electrode. An unbiased solar‐to‐hydrogen conversion efficiency of 3.5 % is realized by this BiVO₄ photoanode and a Si photocathode under 1 sun illumination.     

Preparation of Ag/C fiber with nanostructure through in situ thermally induced redox reaction between PVA and AgNO3 and its catalysis for 4‐nitrophenol reduction

A novel synthesized Ag/C fibrous catalyst based on in situ thermally induced redox reaction of PVA/AgNO₃ composite fibers was proposed. Utilizing the plasticization and complexation of AgNO₃ solution, the melt spinning of PVA/AgNO₃ composites was accomplished. Through the in situ thermally induced redox reaction on PVA/AgNO₃ composite fibers combined with carbonization of PVA and reduction of Ag+, the synthesized Ag/C fibrous catalyst was prepared with nanosilver particles with average diameter of 130 nm immobilized on the loose microstructural carbon layers. The synthesized Ag/C fibrous catalyst exhibited excellent catalytic activity and reused for at least five cycles for the reduction of 4‐nitrophenol, which may hold great promise in effective and eco‐friendly waste water treatment.     

Wearable Multiparameter Platform Based on AlGaN/GaN High‐electron‐mobility Transistors for Real‐time Monitoring of pH and Potassium Ions in Sweat

Biosensors based on field‐effect transistor (FET) structures have attracted considerable attention because they offer rapid, inexpensive parallel sensing and ultrasensitive label‐free detection. However, long‐term repeatable detection cannot be performed, and Ag/AgCl reference electrode design is complicated, which has hindered FET biosensors from becoming truly wearable health‐monitoring platforms. In this paper, we propose a novel wearable detection platform based on AlGaN/GaN high‐electron‐mobility transistors (HEMTs). In this platform, a sweatband was used to continuously collect sweat, and a pH detecting unit and a potassium ion detecting unit were formed by modifying different sensitive films to realize the long‐term stable and repeatable detection of pH and potassium ions. Experimental data show that the wearable detection platform based on AlGaN/GaN HEMTs has good sensitivity (pH 3–7 sensitivity is 45.72 μA/pH; pH 7.4–9 sensitivity is 51.073 μA/pH; and K⁺ sensitivity is 4.94 μA/lgα_K⁺), stability (28 days) and repeatability (the relative standard deviation (RSD) of pH 3–7 sensitivity is 2.6 %, the RSD of pH 7.4–9 sensitivity is 2.1 %, and the RSD of K⁺ sensitivity is 7.3 %). Our newly proposed wearable platform has excellent potential for predictive analytics and personalized medical treatment.     

New Radical Borylation Pathways for Organoboron Synthesis Enabled by Photoredox Catalysis

Radical borylation using N‐heterocyclic carbene (NHC)‐BH₃ complexes as boryl radical precursors has emerged as an important synthetic tool for organoboron assembly. However, the majority of reported methods are limited to reaction modes involving carbo‐ and/or hydroboration of specific alkenes and alkynes. Moreover, the generation of NHC‐boryl radicals relies principally on hydrogen atom abstraction with the aid of radical initiators. A distinct radical generation method is reported, as well as the reaction pathways of NHC‐boryl radicals enabled by photoredox catalysis. NHC‐boryl radicals are generated via a single‐electron oxidation and subsequently undergo cross‐coupling with the in‐situ‐generated radical anions to yield gem‐difluoroallylboronates. A photoredox‐catalyzed radical arylboration reaction of alkenes was achieved using cyanoarenes as arylating components from which elaborated organoborons were accessed. Mechanistic studies verified the oxidative formation of NHC‐boryl radicals through a single‐electron‐transfer pathway.     

Reversibly Switching the Charge State and Adsorption Location of A Single Potassium Atom on Ultrathin CuO Films

Potassium (K) cations are spontaneously formed upon thermal deposition of low‐coverage K onto an ultrathin CuO monolayer grown on Cu(110) and they were explored by low‐temperature scanning tunneling microscopy (STM) and X‐ray photoemission spectroscopy. The formed K cations are highly immobile and thermally stable. The local work function around an individual K cation decreases by 1.5±0.3 eV, and a charging zone underneath it is established within about 1.0 nm. The cationic and neutral states of the K atom are switchable upon application of an STM bias voltage pulse, which is simultaneously accompanied by an adsorption site relocation.     

Palladium‐Catalyzed Asymmetric [8+2] Dipolar Cycloadditions of Vinyl Carbamates and Photogenerated Ketenes

Higher‐order cycloadditions, particularly [8+2] cycloadditions, are a straightforward and efficient strategy for constructing significant medium‐sized architectures. Typically, configuration‐restrained conjugated systems are utilized as 8π‐components for higher‐order concerted cycloadditions. However, for this reason, 10‐membered monocyclic skeletons have never been constructed via catalytic asymmetric [8+2] cycloaddition with high peri‐ and stereoselectivity. Here, we accomplished an enantioselective [8+2] dipolar cycloaddition via the merger of visible‐light activation and asymmetric palladium catalysis. This protocol provides a new route to 10‐membered monocyclic architectures bearing chiral quaternary stereocenters with high chemo‐, peri‐, and enantioselectivity. The success of this strategy relied on the facile in situ generation of Pd‐containing 1,8‐dipoles and their enantioselective trapping by ketene dipolarophiles, which were formed in situ via a photo‐Wolff rearrangement.     

Anti-β-amyloid aggregation activity of enantiomeric furolactone-type lignans from Archidendron clypearia (Jack) I.C.N.

Abstract

The phytochemical investigation on the twigs and leaves of Archidendron clypearia (Jack) I.C.N. led to the isolation of three pairs of furolactone-type lignans enantiomers, including a pair of new compounds (1R,5S,6S)-Kachiranol (1a) and (1S,5R,6R)-Kachiranol (1b) and four known compounds (2a/2b and 3a/3b). Separation of the furolactone-type lignans enantiomeric mixtures was achieved using chiral HPLC for the first time. Their structures were determined by spectroscopic analysis and comparison between the experimental and calculated electronic circular dichroism (ECD) spectra. All optical pure compounds were evaluated for their inhibitory effects on β-amyloid aggregation by ThT assay. Among them, the inhibitory activity of the compound 1b (71.1%) was higher than the positive control (61.0%) and other compounds. In addition, molecular dynamics and molecular docking were employed to explore the binding relationship between the ligand and the receptor.     

Antiproliferative effect of 2-Hydroxy-6-tridecylbenzoic acid from ginkgo biloba sarcotestas through the aryl hydrocarbon receptor pathway in triple-negative breast cancer cells

Abstract

This study aims to isolate the potential antiproliferative and cytotoxic compounds from ginkgo biloba sarcotestas (GBS) and investigates the underlying mechanism in human MDA-MB-231 and mouse 4T-1 triple-negative breast cancer cells. Our results showed that 2-Hydroxy-6-tridecylbenzoic acid was isolated by cytotoxicity-guided fractionation where different fractions were assessed using MTT assay against MDA-MB-231 and 4T-1 cells. Colony formation assay showed that 2-Hydroxy-6-tridecylbenzoic acid significantly inhibited cell proliferation. The inhibition was associated with the enhancement of cytochrome P450 (CYP) 1B1 expression in a dose- and time-dependent manner and no significant change of CYP1A1 expression by qPCR and Western blot assays in MDA-MB-231 and 4T-1 cells. The mechanism was further demonstrated by the activation of aryl hydrocarbon receptor (AhR) pathway with the upregulation of AhR, AhR nuclear translocator (ARNT) and AhR-dependent xenobiotic response elements (XRE) activity. These findings may have implications for development of anticancer agents containing 2-Hydroxy-6-tridecylbenzoic acid as functional additives.     

Kinetics and thermodynamics of rebaudioside A adsorption on a strongly acidic cation exchange resin

To explain the mechanism underlying the adsorption of stevia's polar component rebaudioside A in hydrophilic interaction liquid chromatography mode, the characteristics of rebaudioside A adsorption on various resins in an organic‐solvent‐rich system were studied. Among the tested resins, the strongly acidic cation resin FPC11 showed the best adsorption behavior for rebaudioside A. The factors affecting the adsorption kinetics of the resin for rebaudioside A are discussed. The results showed that the pseudo‐second‐order reaction model and intra‐particle diffusion model best described the adsorption kinetics of rebaudioside A on the resin. The adsorption rate was controlled by physical sorption, mainly via electron sharing or electron transfer between the adsorbent and the adsorbate. The adsorption process with multiple stages involved weak initial adsorption behavior. Thermodynamic studies showed that the adsorption of rebaudioside A on the resin was not an ideal monolayer adsorption, but mutual adsorption effects between the adsorbates. The adsorption was a spontaneous, entropy‐increasing endothermic process. The synergistic effect of hydrogen bonding and ion–dipole was a possible driving force.     

Enantioselective three-component Ugi reaction catalyzed by chiral phosphoric acid

A catalytic enantioselective three-component Ugi reaction was developed. SPINOL-derived phosphoric acid with bulky 2,4,6-tricyclohexylphenyl groups at the 6,6′ positions was found to be the best catalyst to afford α-amino amide derivatives in good to excellent yields(62% to 99%) and enantiocontrol(81% to 99% enantiomeric excess). This asymmetric reaction was applicable well to an array of aliphatic aldehydes. The gram-scale synthesis, modification of dapsone, and enantioselective synthesis of(R)-Lacosamide underline the general utility of this methodology. Influence of dihedral angles and substituents of the chiral phosphoric acids on the enantioselectivity was also discussed in this article.