Thin-Layer Chromatography with an Isolated Support and Forced Flow of the Mobile Phase

JPC – Journal of Planar Chromatography – Modern TLC -     

Amino-Modified Silicate Xerogels Complexed with Cu(II) as Catalyst Precursors. Coordination State and Thermal Decomposition

The sol-gel process is a useful method for preparing two series of organically and co-ordinately modified xerogels of the types [CuN _n ]·N _5–n ·5xSiO_4/2 (n < 4) and [Cu(N–N)_n]·(N–N)_2–n ·2x SiO_4/2(n 2), where N = NH₂(CH₂)₃ SiO_3/2, N–N = NH₂(CH₂)₂NH·(CH₂)₃SiO_3/2 and x = [SiO_4/2]/[N] or [SiO_4/2]/[N–N]. The amino groups in the materials are coordinately active and participate partly in the coordination sphere of Cu(II) ions. The composition of the coordination sphere can be varied with the SiO_4/2 content and also as a result of the thermal decomposition of the organic residues at higher temperatures.Because the xerogel materials are considered to be catalyst precursors, this study is focused on their coordination and thermal properties. The prepared xerogels, such as silica, aminated silicates with N and N–N, as well as those entities complexed with Cu(II), were characterised by FT-IR spectroscopy. During gelation and thermal decomposition the materials were analysed by electron paramagnetic resonance (EPR) spectroscopy. The xerogels were additionally studied by UV-Vis absorption spectroscopy. The gaseous products of the thermal decomposition of these materials in an Ar atmosphere were investigated by the use of FT-IR spectroscopy coupled with TG and DTG thermal analysis. These data were complemented by temperature-programmed decomposition (TPDec) in a 2% O₂ + 98% Ar stream coupled with quadrupole mass spectroscopy.     

Stability of Ibuprofen in its Inclusion Complex with β-Cyclodextrin

The ibuprofen--cyclodextrin inclusion complex was prepared by theco-precipitation method. The identity of the obtained product was verified by X-ray and thermogravimetric techniques. The effect of -cyclodextrin on the stability of ibuprofen was analysed.     

Properties of a genetic algorithm extended by a random self-learning operator and asymmetric mutations: A convergence study for a task of powder-pattern indexing

Genetic algorithms represent a powerful global-optimisation tool applicable in solving tasks of high complexity in science, technology, medicine, communication, etc. The usual genetic-algorithm calculation scheme is extended here by introduction of a quadratic self-learning operator, which performs a partial local search for randomly selected representatives of the population. This operator is aimed as a minor deterministic contribution to the (stochastic) genetic search. The population representing the trial solutions is split into two equal subpopulations allowed to exhibit different mutation rates (so called asymmetric mutation). The convergence is studied in detail exploiting a crystallographic-test example of indexing of powder diffraction data of orthorhombic lithium copper oxide, varying such parameters as mutation rates and the learning rate. It is shown through the averaged (over the subpopulation) fitness behaviour, how the genetic diversity in the population depends on the mutation rate of the given subpopulation. Conditions and algorithm parameter values favourable for convergence in the framework of proposed approach are discussed using the results for the mentioned example. Further data are studied with a somewhat modified algorithm using periodically varying mutation rates and a problem-specific operator. The chance of finding the global optimum and the convergence speed are observed to be strongly influenced by the effective mutation level and on the self-learning level. The optimal values of these two parameters are about 6 and 5%, respectively. The periodic changes of mutation rate are found to improve the explorative abilities of the algorithm. The results of the study confirm that the applied methodology leads to improvement of the classical genetic algorithm and, therefore, it is expected to be helpful in constructing of algorithms permitting to solve similar tasks of higher complexity.     

Theoretical methods in thermodynamics of condensed phases

Theoretical possibilities of determining energetic and thermodynamic characteristics of chemical entities in gaseous and condensed (solid and liquid) phases are briefly reviewed. The considerations include quantum chemistry methods which enable evaluation of energetic quantities and statistical thermodynamics dependencies necessary for determining other thermodynamic characteristics. The possible applications of these methods are also discussed in brief.     

Investigating bidentate and tridentate carbamoylmethylphosphine oxide ligand interactions with rare-Earth elements using electrospray ionization quadrupole ion trap mass spectrometry

Electrospray ionization (ESI) quadrupole ion trap mass spectrometry (QIT-MS) and collisionally activated dissociation (CAD) were used to evaluate the rare-earth binding properties of two hydrophobic carbamoylmethylphosphine oxide (CMPO) ligands, the normal bidentate variety, (t-BuC6H4)2P(O)CH2C(O)N(i-Bu)2 (A), a new potentially tridentate extractant, (t-BuC6H4)2P(O)CH[CH2C(O)N(i-Bu)2]C(O)N(i-Bu)2 (B), and tributyl phosphate. The mass spectral results obtained from analysis of 1% HNO3/methanol solution containing the ligands and dissolved lanthanide salts reveal that the favorable stoichiometries of the ligand/metal/nitrate complexes are 2:1:2 for the bidentate ligand A, 1:1:2 for the tridentate ligand B, and 3:1:2 for the monodentate tributyl phosphate. These observed stoichiometries correlate with the number of available binding sites on each ligand as well as with potential steric effects. Energy-variable collisionally activated dissociation experiments showed that for the 2:1:2 complexes involving ligand A or B, as the ionic radius of the bound metal decreased, the removal of nitric acid required less energy and resulted in less extensive spontaneous solvent coordination. This experimental trend suggests that, as the ionic radius of the lanthanide ion decreases, a pair of the carbamoylmethylphosphine ligands is able to more completely solvate the bound metal ion thereby weakening the nitrate-metal interaction.     

Formal Mathematical Analysis of the Existence of the Common Intersection Point in Relation to Determining the Parameters Describing Ion Adsorption at the Oxide/Electrolyte Interface: Comparison of the Triple and Four-Layer Models

For most oxide/electrolyte systems potentiometric titration curves measured for different ionic strengths have a Common Intersection Point (CIP) which corresponds to the Point of Zero Charge (PZC). However, there are systems where a CIP exists but the surface charge at this point does not equal zero (PZC CIP). In this paper theoretical analysis of the systems in which the PZC and CIP do not coincide is presented. It is based on the well-known 2-pK surface charging approach and Triple Layer Model (TLM) as well as the Four Layer Model (FLM) of the electric double layer. The appropriate mathematical criterion for CIP existence was applied with detailed derivations, both for TLM and FLM. Having determined in this manner the parameter values, one can draw proper conclusions about the features of oxide/electrolyte adsorption systems, in which PZC and CIP do not coincide. The values of adsorption parameters are found by fitting simultaneously the obtained theoretical expressions to both of the experimental titration isotherms, and to the individual isotherms of electrolyte cation adsorption measured using radiometric methods.     

Secondary deuterium kinetic isotope effects in irreversible additions of allyl reagents to benzaldehyde

The competitive kinetics of additions of allyl to benzaldehyde-h and -d from allyltributyl tin, from diisopropyltartrylallyl boronate, and from allyl bromide and zinc dust in aqueous tetrahydrofuran have inverse secondary deuterium kinetic isotope effects, SDKIEs. These inverse SDKIEs are in contrast to the normal SDKIEs that were obtained with allyl lithium and allyl Grignard, suggesting rate-determining single-electron transfer in these cases. By various MO calculations the transition state for addition of allyl boronate occurs with substantial B-O bond formation and little C-C bond formation. The magnitudes of the SDKIEs with the other two allylating reagents, when compared with reasonable equilibrium isotope effects for the addition, suggest transition states with substantial C-C bond formation.     

Crystal and molecular structure of [9-(2′-tosylaminophenyl)-6-methylthio-3-acetyl-5,7,8-triazanone-3,6,8-thien-2-one]

Institute for Applied Physics, Academy of Sciences of the Moldavian SSR. Institute of Chemistry, Academy of Sciences of the Moldavian SSR. Nat. Research Institute for Physics and Organic Chemistry, Rostov State University. Translated from Zhurnal Strukturnoi Khimii, Vol. 31, No. 2, pp. 199–202, 1990.     

Mikronachweis der Salicylsäure als Silbersalicylat

Zusammenfassung Es wird eine Methode beschrieben, nach der die Salicylsäure über ihr Ammonsalz als Silbersalicylat in kleinsten Mengen nachgewiesen werden kann. Es bilden sich dabei monokline Prismen in Form von Rhomboiden, die durch die Kristallwinkel, die schiefe Auslöschung und deren Beziehung zum Kristallumriß als Silbersalicylat identifiziert werden können. Erfassungsgrenze: 0,4 Salicylsäure. Ferner wird das unter Umständen ebenfalls bei der Reaktion auftretende Silbersalz der Benzoesäure und seine Unterscheidung von Silbersalicylat auf optischem Wege besprochen. Die Reaktion gelingt auch mit Mikrosublimaten.

---

Summary A method is described whereby minimal amounts of salicylic acid can be detected as silver salicylate, viâ the ammonium salt. Monoclinic prisms of the form of rhomboids are produced, which may be identified as silver salicylate from the crystal angles, the oblique extinction, and the relationship of these to the crystal outline. The limit of the method is 0,4 salicylic acid. The optical method for distinguishing between silver salicylate and silver benzoate, which is also formed in certain circumstances in the course of the reaction, is discussed. The reaction may be successfully applied to micro-sublimates.

---

Résumé On décrit une méthode, qui permet de déceler des plus petites quantités de l'acide salicylique comme salicylate d'argent en préparant d'abord le salicylate d'ammonium. Des prismes monoclines, en forme rhombique, se forment d'abord, qui peuvent être identifiés comme salicylate d'argent par l'angle du cristal (Kristallwinkel), l'extinction oblique (schiefe Auslöschung) et les relations de ceux aux contoures du cristal (Kristallumriß). Limite d'identification: 0,4 d'acide salicylique. Ensuite on discute aussi la différence entre le salicylate d'argent et le benzoate d'argent, qui se forme parfois au cours de la réaction, d'un mode optique. — La réaction peut être appliquée aussi à des micro-sublimés.