CONCEPTUAL DESIGN STUDIES OF AN 84 GHz, 500 kW, CW GYROTRON

The feasibility of an 84 GHz, 500 kW, CW gyrotron for ECRH on an experimental tokamak will be presented in this paper. Mode competition and mode selection procedures are carefully investigated by considering various candidate modes and the TE_10,4 mode is chosen as the operating mode. A conventional cylindrical cavity resonator with weak input and output tapers and parabolic roundings is considered for interaction studies. Self-consistent, both single mode and time-dependent, calculations are carried out and power and efficiencies are computed for a typical set of beam parameters. The results show that an output power of well over 500 kW, CW and efficiency around 40% can be reached without a depressed collector.     

Mass Power Spectrum in a Universe Dominated by the Chaplygin Gas

The mass power spectrum for a Universe dominated by the Chaplygin gas is evaluated numerically from scales of the order of the Hubble horizon to 100 Mpc. The results are compared with a pure baryonic Universe and a cosmological constant model. In all three cases, the spectrum increases with k, the wavenumber of the perturbations. The slope of the spectrum is higher for the baryonic model and smaller for the cosmological constant model, the Chaplygin gas interpolating these two models. The results are analyzed in terms of the sound velocity of the Chaplygin gas and the moment the Universe begins to accelerate.     

Electroactive conducting polymers for corrosion control

There is an intensive effort underway to develop new corrosion control coatings for structural metals. In part, this effort has been motivated by the desire to replace chromium(VI)-containing coatings currently used for corrosion control of iron and aluminum alloys. Cr(VI) has been shown to be hazardous to the environmental and to human health, and its use in many countries will be sharply curtailed in the coming years. Electroactive conducting polymers (ECPs) represent a class of interesting materials currently being explored for use in corrosion control coating systems, possibly as a replacement for Cr(VI)-based coatings. The electroactivity and the electronic conductivity (or semiconductivity) of ECPs set them apart from traditional organic coatings. As with chromate, interesting and potentially beneficial interactions of ECPs with active metal alloys such as steel and aluminum are anticipated, with concomitant alteration of their corrosion behavior. A review of this active research area will be presented in two parts. Here in Part 1, a general introduction to the topic of corrosion control by ECPs will be presented, including an overview of corrosion and its control by traditional methods, an introduction to ECPs and their properties, and a discussion of the processing issues surrounding the use of ECPs as coatings. Part 1 also includes a review of the literature on the use of ECPs as coatings (or components of coatings) on non-ferrous active metals, principally aluminum and aluminum alloys, although some work on zinc, copper, silver, titanium and silicon will also be described. In Part 2 of this review (to be published in the next issue of this journal), the rather extensive literature on the use of ECPs for the corrosion control of ferrous alloys (steels) will be reviewed. Electronic Publication     

Studies on amine hydrothiocyanates. IV. Thermal decomposition studies using TG

The thermal decomposition of piperidine hydrothiocyanate, piperazine hydrothiocyanate, and the dihydrothiocyanates of ethylenediamine and 1,3-diaminopropane has been studied using TG. Piperidine hydrothiocyanate decomposes in a single step while the dihydrothiocyanates follow more complicated decomposition patterns yielding H₂S and half of the organic moiety first. The second step involves the loss of H₂S and the remainder of the organic moiety. In each case, complex polymeric materials result. Piperazine hydrothiocyanate also decomposes in two steps, the first involving the loss of half of the piperazine and the second involving the loss of piperazine and H₂S. Kinetic parameters have been determined for all these reactions.     

Frequency resolution as a function of hearing threshold level and age

Frequency resolution ability was measured using a psychoacoustical tuning curve (PTC) or a notch-noise technique in two population samples. The first sample incorporated 1764 subjects with various degrees of sensorineural hearing impairment and ranging in age from 17-80 years. The second sample included 240 subjects aged between 50 and 75 years, carefully balanced in terms of impairment and age to avoid confounding between these two variables. In both samples, frequency resolution ability declined with increasing hearing threshold level (HTL), as measured by either method. In a subsample tested with both methods, the correlation between the two was only modest. After accounting for HTL, there was a minor dependence of frequency resolution on age, older subjects having poorer frequency resolution once HTL had been accounted for. No addition to the explained variance was achieved by taking sex, occupational group, or audiogram slope into account. Despite the documented reproducibility of the measures, much of the variance in the frequency resolution measurements remained unrelated to HTL or age.     

Investigation of the structure of a melt and molecular dynamics of ortho- and pyrophosphates by Raman spectroscopy

Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 55, No. 4, pp. 535–540, October, 1991.     

Geometrical method for determining the surface damage threshold for femtosecond laser pulses

A new geometrical method to determine the surface damage threshold for ultrashort pulses is presented. It consists in the formation of a surface damage profile by a movement of the sample across the laser beam focus. A single measurement of the maximum transversal dimension of this damage profile, which depends solely on the laser beam power, is used to calculate the local damage threshold intensity. It is also theoretically shown that the damage in the transverse dimension can be controlled under the diffraction-limited spot.     

The AB2-XA1 electronic transition of NO2: A rovibronic survey covering 14 300-18 000 cm

More than 250 rotationally resolved vibrational bands of the A²B₂-X²A₁ electronic transition of ¹⁵NO₂ have been observed in the 14 300-18 000 cm⁻¹ range. The bands have been recorded in a recently constructed setup designed for high resolution spectroscopy of jet cooled molecules by combining time gated fluorescence spectroscopy and molecular beam techniques. The majority of the observed bands has been rotationally assigned and can be identified as transitions starting from the vibrational ground state or from vibrationally excited (hot band) states. An exceptionally strong band is located at 14 851 cm⁻¹ and studied in more detail as a typical benchmark transition to monitor ¹⁵NO₂ in atmospheric remote sensing experiments. Standard rotational fit routines provide band origins, rotational and spin rotation constants. A subset of 177 vibronic levels of ²B₂ vibronic symmetry has been analyzed in the energy range between 14 300 and 17 250 cm⁻¹, in terms of integrated density and using Next Neighbor Distribution. It is found that the overall statistical properties and polyad structure of ¹⁵NO₂ are comparable to those of ¹⁴NO₂ but that the internal structures of the polyads are completely different. This is a direct consequence of the X²A₁-A²B₂ vibronic mixing.     

Periodic Integrable Systems with Delta-Potentials

In this paper we study root system generalizations of the quantum Bose-gas on the circle with pair-wise delta-function interactions. The underlying symmetry structures are shown to be governed by the associated graded algebra of Cherednik's (suitably filtered) degenerate double affine Hecke algebra, acting by Dunkl-type differential-reflection operators. We use Gutkin's generalization of the equivalence between the impenetrable Bose-gas and the free Fermi-gas to derive the Bethe ansatz equations and the Bethe ansatz eigenfunctions.