Immobilization of phospholipid-avidin on fused-silica capillaries for chiral separation in open-tubular capillary electrochromatography

Phospholipid-coated fused-silica capillaries with immobilized avidin were applied in the chiral separation of D,L-tryptophan, D,L-PTH-serine, and D,L-PTH-threonine at pH 7.4 by open-tubular CEC. Liposomes prepared from 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(Cap biotinyl), or 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(Biotinyl) with different amounts of phosphatidylserine were assessed as phospholipid coating materials. The stability of the coating and the success of the coating procedure were evaluated in terms of the repeatability of the enantiomer migration times and the resolution of enantiomers. The coating procedure itself significantly affected the migration times and resolution of the enantiomers. Reliable chiral separations with high separation efficiencies were achieved through careful choice of the coating method.     

Determination of iridoid glycosides in larvae and adults of butterfly<Emphasis Type="Italic"> Melitaea cinxia</Emphasis> by partial filling micellar electrokinetic capillary chromatography—electrospray ionisation mass spectrometry

The iridoid glycosides, methyl catalpol, asperuloside, verbenalin, cinnamoyl catalpol, catalpol and aucubin, were studied from both larvae and adults of butterfly Melitaea cinxia. Special emphasis in the study was put on finding a correlation between the iridoid glycoside content in butterflies and plants. An optimised partial filling micellar electrokinetic capillary chromatographic–electrospray ionisation mass spectrometric (PF-MECC-ESI-MS) method was employed for the separation and identification of the six iridoid glycosides. In this work, the isolation and determination of catalpol and aucubin from extracts of both larvae and adults of Melitaea cinxia butterflies is demonstrated. The PF-MECC-ESI-MS method, using the [M+Na]+, [M+Li]+ and/or [M+NH₄]+ adducts in ESI-MS, was used for quantification of aucubin and catalpol in the insects. In addition, the identification of all analytes was attempted by direct infusion MS/MS analysis. LOQ values for the iridoid glycosides varied between 10 mg/l (for verbenalin) to 50 mg/l (for catalpol and aucubin) corresponding to 0.1% of the sample´s dry mass. A correlation was noticed between the concentrations of iridoid glycosides in plants and the concentrations in larvae feeding on them.     

Use of a partial filling technique and reverse migrating micelles in the study of N-methylcarbamate pesticides by micellar electrokinetic chromatography-electrospray ionization mass spectrometry

This study describes three ways to couple micellar electrokinetic chromatography (MEKC) on-line with electrospray ionization mass spectrometry (ESI-MS) for the analysis of N-methylcarbamate pesticides. The methods involved the use of a partial filling (PF) technique under basic conditions and the use of reverse migrating micelles (RMMs) under acidic and basic conditions. The use of RMMs in basic electrolyte solutions required coated capillaries with low electroosmotic flows, and capillaries coated with anionic poly(sodium 2-acrylamide-2-methylpropanesulfonate) were selected for the purpose. Before the on-line MEKC-ESI-MS coupling, the MEKC and MS conditions were separately optimized under off-line conditions. The methods were compared in terms of detection limits and the stability of the electrospray process. The PF method offered good separation but poorer stability of the electrospray relative to the other methods. A more stable electrospray performance was obtained with use of RMMs in acidic electrolyte solutions, but some of the analytes were protonated and could not be detected due to the increase in their retention factors. However, with the use of anionic polymer-coated capillaries and RMMs at pH 8.5, all analytes were successfully separated. The high-salt stacking method was applied to improve the sensitivity of MEKC-ESI-MS and the detection limits were in the range of 0.04-2.0 microg/ml.     

Phospholipid-lysozyme coating for chiral separation in capillary electrophoresis

A phospholipid coating with lysozyme as chiral recognition reagent permeated into the phospholipid membrane was developed for the chiral capillary electrophoretic (CE) separation of D- and L-tryptophan. As a kind of carriers, coated as phospholipid membranes onto the inner wall of a fused-silica capillary, liposomes are able to interact with basic proteins such as lysozyme, which may reside on the surface of the phospholipid membrane or permeate into the middle of the membrane. The interaction results in strong immobilization of lysozyme in the capillary. Coatings prepared with liposomes alone did not allow stable immobilization of lysozyme into the phospholipid membranes, as seen from the poor repeatability of the chiral separation. When 1-(4-iodobutyl)-1,4-dimethylpiperazin-1-ium iodide (M1C4) was applied as a first coating layer in the capillary, the electroosmotic flow (EOF) was effectively suppressed, the phospholipid coating was stabilized, and the lysozyme immobilization was much improved. The liposome composition, the running buffer, and the capillary inner diameter all affected the chiral separation of D- and L-tryptophan. Coating with 4 mM M1C4 and then 1 mM phosphatidylcholine (PC)/phosphatidylserine (PS) (80:20 mol%), with 20 mM (ionic strength) Tris at pH 7.4 as the running buffer, resulted in optimal chiral separation with good separation efficiency and resolution. Since lysozyme was strongly permeated into the membrane of the phospholipids on the capillary surface, the chiral separation of D- and L-tryptophan was achieved without lysozyme in the running buffer. The effects of different coating procedures and separation conditions on separation were evaluated, and the M1C4-liposome and liposome-lysozyme interactions were elucidated. The usefulness of protein immobilized into phospholipid membranes as a chiral selector in CE is demonstrated for the first time.     

Dielectric relaxation phenomena of rigid polar liquid molecules under giga hertz electric field

The dielectric relaxation phenomena of rigid polar liquid molecules chloral and ethyltrichloroacetate (j) in benzene, n-hexane and n-heptane (i) under 4.2, 9.8 and 24.6 GHz electric fields at 30°C are studied to show the possible existence of double relaxation times τ ₂ and τ ₁ for rotations of the whole and the flexible parts of molecules. The probability of showing double relaxation is more in aliphatic solvents indicating their nonrigidity. The symmetric and asymmetric distribution parameters γ and δ are obtained from X _ij ^′ /X _0ij and X _ij ^″ /X _0ij and w _j →0 where X _ij ^′ and X _ij ^″ are real and imaginary parts of the complex orientational susceptibility X _i ^* and X _0ij is the low frequency susceptibility which is real. X _ij ’s are involved with the measured dielectric relative permittivities ε _ij ^′ , ε _in ^″ , ε _0ij and ε _∞ij of solutions. The theoretical weighted contributions c ₁ and c ₂ towards dielectric dispersions by Fröhlich’s method are compared with the experimental ones obtained from the graphical variation of X _ij ^′ /X _0ij and X _ij ^″ /X _0ij with weight fractions w _j ’s at w _j → 0. The measured dipole moments μ ₂ and μ ₁ of the whole and the flexible part of a polar molecule in terms of the linear coefficients β’s of X _ij ^′ ’s with w _j ’s and the estimated τ ₂ and τ ₁ reveal their associations with aliphatic solvents. The theoretical dipole moments μ _theo’s from the available bond angles and bond moments of the substituent polar groups of the molecules with the estimated μ’s suggest the mesomeric, inductive and electromeric effects in them under GHz electric field.     

Microwave absorption studies of MgB2 superconductor

Microwave absorption studies have been carried out on MgB₂ superconductor using a standard X-band EPR spectrometer. The modulated low-field microwave absorption signals recorded for polycrystalline (grain size ∼ 10 μm) samples suggested the absence of weak-link character. The field dependent direct microwave absorption has been found to obey a ✓H dependence with two different slopes, which indicated a transition from strongly pinned lattice to flux flow regime.     

New modifications in 15 UD pelletron at nuclear science centre

The 15 UD pelletron at NSC has been operational and performed well during the last 11 years. There have been major modifications performed for upgradation of pelletron system over this period. Major upgradations which have been implemented are new resistor network system for voltage gradient, doublet to singlet unit conversion for accelerator units, turbopump based gas stripper system etc. In addition accelerator mass spectroscopy program has also been started. A new multi-cathode source, Wien filter etc. have been procured and will be added soon in the system. An overview of the most significant upgradations undertaken and other activities for the system are being reported in the present paper.     

Effect of substrate temperature on electrical and magnetic properties of epitaxial La1−x Pb x MnO3 films

Epitaxial La_1−x Pb _x MnO₃ (LPMO) thin films, grown on (100) SrTiO₃ substrates by laser ablation technique at different temperatures between 600 and 850°C, have been characterized for electrical and magnetic properties. The temperature dependence of resistivity showed that the metal-insulator transition temperature (T _MI) decreases with increasing substrate temperature, which has been attributed to decrease in Pb content in the filsm. The YBa₂Cu₃O _x /La_1−x MnO₃ heterostructures, exhibiting both superconductivity and ferromagnetism, have been fabricated.     

Polyelectrolyte complexes of poly(methacryloxyethyl trimethylammonium chloride) and poly(ethylene oxide)-block-poly(sodium methacrylate) studied by asymmetrical flow field-flow fractionation and dynamic light scattering

Polyelectrolyte complex (PEC) formation between cationic poly(methacryloxyethyl trimethylammonium chloride) (PMOTAC) and anionic poly(ethylene oxide)-block-poly(sodium methacrylate) (PEO-b-PMANa) was studied by asymmetrical flow field-flow fractionation and dynamic light scattering. The influence of ionic strength and mixing ratios of the charged units of the polyelectrolytes on the complex formation was evaluated. The diffusion coefficients and the hydrodynamic diameter distributions of the free and complexed polyelectrolytes were measured. In the absence of salt, the weight averaged hydrodynamic diameters were 48 and 28 nm for PMOTAC and PEO-b-PMANa, respectively. In the presence of salt, the particles were smaller, with weight averaged hydrodynamic diameters of 44-45 and 8-10 nm, respectively. In salt-free solution, at 1:1 mixing ratio of the charged monomer units of PMOTAC and PEO-b-PMANa, polydisperse particles with diameters of 2000-4000 nm were formed. In the presence of 20, 80, and 160 mM of sodium chloride, the 1:1 complexes were relatively monodisperse particles with weight averaged hydrodynamic diameters of 93, 124, and 120 nm, respectively.