Biosorption of metal ions with Penicillium chrysogenum

Biosorption of metal ions with Penicillium chrysogenum mycelium is described in this article. Alkaline pretreatment was used to remove proteins and nucleic acids from cells, and this treatment increased the adsorption capacities, for Cr³⁺ from 18.6 mg g⁻¹ to 27.2 mg g⁻¹, for Ni²⁺ from 13.2 mg g⁻¹ to 19.2 mg g⁻¹, for Zn²⁺ from 6.8 mg g⁻¹ to 24.5 mg g⁻¹. The adsorption of metal ions was strongly pH dependent. The mycelium could beused for large-scale removal of Cr³⁺ from tannery wastewater. The results show that this inexpensive mycelium adsorbent has potential in industry because of its high adsorption capacity. The main chelating sites are amino groups (−NH₂) of chitosan in the mycelium. A new model is established, which describes the relation of adsorption of metal ions on pH according to amino group chelating with metal ions and H⁺. The relative errors of simulation for Cu²⁺, Ni²⁺, Zn²⁺, and Cr³⁺ are 4.66%, 5.45%, 11.55%, and 1.69%, respectively.     

Detection of antisperm antibody in human serum using a piezoelectric immunosensor based on mixed self-assembled monolayers

A novel piezoelectric immunosensor based on mixed self-assembled monolayers (mixed SAMs) formed by short-chain amine- and carboxyl-terminated thiols has been developed to immobilize antigens onto gold electrodes for detecting antisperm antibody (AsAb) in human serum samples. The properties and the enhanced performance of the affinity biosensor interface based on mixed SAMs are investigated. Most importantly, analytical results of several human serum samples using the developed technique are in satisfactory agreement with those given by the enzyme-linked immunosorbent assay (ELISA) method in the concentration ranging from 32.3 to 300.0 mU/ml. It means the procedure proposed in this paper is likely to have a great potential in research and may play an important clinical role in a few years later.     

Poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)-g-poly(vinylpyrrolidone): association behavior in aqueous solution and interaction with anionic surfactants

In this work, we aimed to study the association and interaction behavior of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) block copolymers grafted with poly(vinylpyrrolidone). Critical micellization concentrations were determined using fluorescent probes (pyrene) and critical micellization temperatures characterizing temperature-dependent transitions from monomers to multimolecular micelles were measured. The thermal responsiveness of the copolymer is not affected by the grafting. The hydrodynamic radius of the graft copolymer micelles is found to be greater than that of the original copolymer micelles. The graft copolymer is found to form anisotropic aggregates. The structure of the graft copolymer micelles is less disrupted by the anionic surfactant sodium dodecyl sulfate, compared to the ungraft copolymer.     

Lycopodine‐Type Lycopodium Alkaloids from Huperzia serrata

Eleven Lycopodium alkaloids with a lycopodine‐type skeleton were isolated from the basic material of the whole plant of Huperzia serrata (Thunb .) Trev. (Huperziaceae). Among them, 12‐epilycodoline N‐oxide (=(12α,15R)‐12‐hydroxy‐15‐methyllycopodan‐5‐one N‐oxide; 1 ), 7‐hydroxylycopodine (=(15S)‐7‐hydroxy‐15‐methyllycopodan‐5‐one; 2 ), and 4,6α‐dihydroxylycopodine (=(6α,15R)‐4,6‐dihydroxy‐15‐methyllycopodan‐5‐one; 3 ) are new compounds. Their structures were identified spectroscopically, especially by means of 1D‐ and 2D‐NMR.     

Orientational dynamics of water confined on a nanometer length scale in reverse micelles

The time-resolved orientational anisotropies of the OD hydroxyl stretch of dilute HOD in H(2)O confined on a nanometer length scale in sodium bis(2-ethylhexyl) sulfosuccinate (AOT) reverse micelles are studied using ultrafast infrared polarization and spectrally resolved pump-probe spectroscopy, and the results are compared to the same experiments on bulk water. The orientational anisotropy data for three water nanopool sizes (4.0, 2.4, and 1.7 nm) can be fitted well with biexponential decays. The biexponential decays are analyzed using a wobbling-in-a-cone model that involves fast orientational diffusion within a cone followed by slower, full orientational relaxation. The data provide the cone angles, the diffusion constants for motion within the cones, and the final diffusion constants as a function of the nanopool size. The two processes can be interpreted as a local angular fluctuation of the OD and a global hydrogen bond network rearrangement process. The trend in the relative amplitudes of the long and short exponential decays suggest an increasing rigidity as the nanopool size decreases. The trend in the long decay constants indicates a longer hydrogen bond network rearrangement time with decreasing reverse micelle size. The anisotropy measurements for the reverse micelles studied extrapolate to approximately 0.33 rather than the ideal value of 0.4, suggesting the presence of an initial inertial component in the anisotropy decay that is too fast to resolve. The very fast decay component is consistent with initial inertial orientational motion that is seen in published molecular-dynamics simulations of water in AOT reverse micelles. The angle over which the inertial orientational motion occurs is determined. The results are in semiquantitative agreement with the molecular-dynamics simulations.     

Two New Cyclopeptides from Arenaria oreophila (Caryophyllaceae)

Two new cyclopeptides, named arenariphilin A ( 1 ) and arenariphilin B ( 2 ), were isolated from the whole plants of Arenaria oreophila. Their structures were determined as cyclo‐(Thr‐Gly) ( 1 ) and cyclo‐(Ser₁‐Gly ‐Ser₂‐Ile ‐Phe₁‐Phe₂) ( 2 ) on the basis of spectral data, especially by 2D‐NMR.     

SnCl2-mediated carbonyl allylation in fully aqueous media

Systematic studies were performed on SnCl₂-mediated carbonyl allylation reaction between aldehydes and allyl halides in fully aqueous media. Totally three valuable reaction systems were discovered, which were SnCl₂/CuCl₂, SnCl₂/TiCl₃, and SnCl₂/PdCl₂. They all provided good to excellent yields in the allylation of aliphatic and aromatic aldehydes under very mild and convenient conditions. SnCl₂, by itself, was also found to be effective for the allylation reaction when allyl bromide was employed. However, the SnCl₂-only reaction could only tolerate very small amount of water as the solvent. The SnCl₂/CuCl₂, SnCl₂/TiCl₃, and SnCl₂/PdCl₂-mediated reactions exhibited good regioselectivity favoring the γ-adduct when cinnamyl halides were employed as the allylation reagent. The same reactions with cinnamyl halides also showed good diastereoselectivity favoring the anti-product. Mechanistic studies using proton NMR techniques suggested that the additive (i.e., CuCl₂, TiCl₃, PdCl₂) could accelerate the formation of allyltin intermediate, but this step was shown not to be the most important for the allylation. Thus we proposed that the Lewis acid catalysis effect exerted by the additive was the main reason for the observed reactivity enhancement.     

Studies of synergism for lowering dynamic interfacial tension in sodium alpha-(n-alkyl) naphthalene sulfonate/alkali/acidic oil systems

Alkylnaphthalene sulfonates with high purity were selected as model components to research synergism for lowering interfacial tension (IFT) in surfactant/alkali/acidic oil systems. The dynamic IFTs between alkylnaphthalene sulfonates with different alkyl chain length and n-decane, oleic acid model oil, or Shengli crude oil were measured. The results showed that the alkylnaphthalene sulfonates with different alkyl chain lengths had different synergism with different acidic components and their ionized acids under the same conditions. The synergism for lowering dynamic IFT in alkylnaphthalene sulfonate/alkali/acidic oil systems was controlled by alkylnaphthalene sulfonate concentration, alkyl chain length, alkali concentration, alkali type, and oleic acid concentration: optimal physicochemical conditions were necessary to the best synergism. This indicates that the synergism among added surfactant acidic components in crude oil and their ionized acids is controlled by the ratio of their interfacial concentrations.     

First principle calculations study of AlN surface terminal structure evolution under different conditions

The surface structure and properties of aluminum nitride (AlN) play an important role in many applications. Using the first principle calculations method, we analyzed the surface terminal structure of AlN and its evolution under different conditions by determining the surface energy, adsorption energy, and evaporation energy of the Al and N terminals on the AlN(0001) surface. Our results show that the reason why the N terminal is less stable than the Al terminal is not only because of its high surface energy but also because its adsorption performance is extremely sensitive to the adsorption position. The surface N atoms combine to form N₂ molecules that escape during the evaporation process at high temperature. After surface N atoms escape, the AlN surface structure reconstitutes to form a hexagonal closest packing (HCP)–like structure, and the energy barrier for the reconstructing process is 3.2 eV. This shows that the structure and form of the AlN(0001) terminals depend on the environmental conditions.     

塔板理论对柱内和柱外浓度分布曲线的描述

使用Visual Basic和QBasic程序，分别在Excel和DOS上，在不做任何化简的情况下，对塔板理论描述的柱内和柱外组分浓度分布进行了研究。发现符合线性分配的样品组分在色谱柱内存在3种不同的浓度分布形态，在色谱柱外则都是拖尾峰形态。分析了不同分配比对柱内和柱外浓度分布曲线最高点和次高点的影响。