Silicification‐Induced Cell Aggregation for the Sustainable Production of H2 under Aerobic Conditions

Photobiological hydrogen production is of great importance because of its promise for generating clean renewable energy. In nature, green algae cannot produce hydrogen as a result of the extreme sensitivity of hydrogenase to oxygen. However, we find that silicification‐induced green algae aggregates can achieve sustainable photobiological hydrogen production even under natural aerobic conditions. The core–shell structure of the green algae aggregates creates a balance between photosynthetic electron generation and hydrogenase activity, thus allowing the production of hydrogen. This finding provides a viable pathway for the solar‐driven splitting of water into hydrogen and oxygen to develop green energy alternatives by using rationally designed cell–material complexes.     

采用自适应直角网格计算三维增升装置绕流

针对三维增升装置绕流，对存在剪刀叉的不连续外形，基于自适应直角网格，提出并介绍了分区和面搭接技术，采用变长宽比网格，进行了直角网格生成和流场Euler方程数值计算. 根据几何外形的特点，在直角网格生成过程中，以外形不连续面作为分区边界，对初始``根'网格实施分区处理，降低了整个网格的生成难度. 通过基于外形的自适应网格加密，详细描述了剪刀叉外形和缝道，提高了网格质量. 在分区边界面上，基于面搭接技术，构造重叠面积切割算法，实现边界两侧网格间的流场信息传递，保证流场计算中的通量守恒. 采用中心有限体积方法，结合双时间推进算法，完成了两段机翼、带增升襟翼翼身组合体绕流流场的Euler方程数值模拟，对计算结果与实验数据进行了对比，验证了所提方法、算法的合理性和实用性.     

Hydrothermal Synthesis of Nickel Phosphate Nanorods for High‐Performance Flexible Asymmetric All‐Solid‐State Supercapacitors

Ni₂₀[(OH)₁₂(H₂O)₆][(HPO₄)₈(PO₄)₄]·12H₂O nanorods are successfully synthesized via a one‐pot hydrothermal reaction. A high‐performance flexible asymmetric all‐solid‐state supercapacitor based on the obtained Ni₂₀[(OH)₁₂(H₂O)₆][(HPO₄)₈(PO₄)₄]·12H₂O nanorods (positive electrode) and graphene nanosheets (negative electrode) is successfully assembled. It is the first report of this nanomaterial applied for all‐solid‐state supercapacitors. Interestingly, a maximum volumetric energy density of 0.446 mW h cm^?3 at a current density of 0.5 mA cm^?2 and a maximum power density of 44.1 mW cm^?3 at a current density of 6.0 mA cm^?2 are achieved by the as‐assembled device. What's more, the device also shows excellent mechanical flexibility and little capacitance change after over 5000 charge/discharge cycles at a current density of 0.5 mA cm^?2.     

大相对孔径宽视场无遮拦平场两反射镜望远物镜分析与设计

根据研制宽视场大相对孔径高光谱成像仪的性能指标和应用要求,研究与设计了结构简单的凸面、凹面反射镜组成的偏视场两反前置系统。基于高斯光学和利用杨氏公式的像散分析,在系统焦距归一化条件下,凸面反射镜顶点曲率半径的取值区间为[2.5 mm,3.24 mm)。给出根据指标要求确定系统初始结构参数的方法与结果。例如,优化设计得到的偏视场无遮拦像方远心两反前置望远物镜的工作波段为0.4~1.0μm、相对孔径为1/1.8、视场角为40°。此镜头的两块反射镜面形均为扁球型二次曲面,具有结构简单、成像性能接近衍射极限、像方远心、及相对孔径大集光本领强、视场大且平像场的优点,可用作高空间分辨率、高光谱分辨率及高信噪比要求的成像光谱仪的前置物镜。     

Effect of Structural Parameters of TiO2 Nanotube Arrays upon Their Photocatalytic/Photoelectrocatalytic Performance

The effect of structural parameters of TiO₂ nanotube arrays (TNAs) upon their photocatalytic/photoelectro‐catalytic performance is studied by comparing the morphological characteristics and physicochemical properties with different tube lengths prepared from three kinds of electrolytes. The results show that the UV‐Vis absorption edge of TNAs red‐shifted with the increment of tube length and the short TNAs possess higher bandgap energy. The variation tendency of electrochemical window of TNAs is DMSO (5.5 V)>Cit (3.2 V)>HF (1.8 V). The long TNAs possess higher photocatalytic (PC) reactivity suggesting the surface roughness factor is the main determinant of PC efficiency, although, there is obvious recombination effects for the long TNAs. Evidenced by the positive correlation between tube length and photoelectrocatalytic (PEC) efficiency for TNAs from the same electrolyte, the enhancement of the tube length could lead to better PEC reactivity, but when the tube length is over a certain value, the PEC degradation rate no longer increases but decreases. The long TNAs with large surface roughness factor prepared from Cit and DMSO electrolytes exhibit comparative or even lower PEC performance compared with the short TNAs prepared from HF electrolyte, indicating that the PEC performance of TNAs was dominated by charge separation and photoelectron transfer properties rather than surface roughness coefficient and the tube length.     

TiO2‐assisted Photocatalytic Degradation of Vitamin B12 in Aqueous Solution:Influencing Factors,Kinetics, and Reaction Investigations

The photodegradation (λ=365 nm) of the biomolecule vitamin B₁₂, catalyzed by the photocatalyst TiO₂ nanoparticles (NPs), has been investigated in aqueous suspension. The photodegradation process of vitamin B₁₂ has been monitored by means of electronic absorption (Abs), Fourier‐transform infrared (FT‐IR), and resonance Raman (RR) spectroscopies, respectively. The results show that only under UV illumination in the presence of TiO₂ is there effective degradation, and the photocatalytic degradation of vitamin B₁₂ is strongly influenced by the amount of TiO₂ NPs, the pH, and the initial concentration of vitamin B₁₂. The photocatalytic reaction kinetics of vitamin B₁₂ conforms to a Langmuir‐Hinshelwood isotherm model. Changes involving the three structural units of the carbon‐metal bond C–Co, the organic corrin macrocycle combined with the benzimidazole nucleotide, and the inorganic CN in the vitamin B₁₂ molecule during the photocatalytic degradation are also discussed.     

Preparation of nanoalumina/EPDM composites with good performance in thermal conductivity and mechanical properties

In this paper, nanoalumina (Al₂O₃) highly filled ethylene propylene diene monomer (EPDM) composites are prepared, and the mechanical (static and dynamic) properties and thermal conductivity are investigated systemically through various characterization methods. Furthermore, influences of in situ modification (mixing operation assisted by silane at high temperature for a certain time) with the silane‐coupling agent bis‐(3‐triethoxy silylpropyl)‐tetrasulfide (Si69) and stearic acid (SA) pretreatment on the nano‐Al₂O₃ filled composites are as well investigated. The results indicate that nano‐Al₂O₃ particles can not only perform well in reinforcing EPDM, but also improve the thermal conductivity significantly. Assisted by in situ modification with Si69, the mechanical properties (especially dynamic mechanical properties) of the nano‐Al₂O₃ filled composites are improved obviously, without influencing the thermal conductivity. By comparing to the traditional reinforcing fillers, such as carbon black (grade N330) and silica, in situ modified nano‐Al₂O₃ filled composites exhibit excellent performance in mechanical (static and dynamic) properties as well as better thermal conductivity, especially lower compression heat build‐up and better fatigue resistance. In general, our work indicates that nano‐Al₂O₃, as the novel thermal conductive reinforcing filler, is suitable to prepare rubber products serving in dynamic conditions, with the longer expected service life. Copyright © 2010 John Wiley & Sons, Ltd.     

Direct Electrochemistry and Electrocatalysis of Myoglobin with Ionic Liquid through Multilayers Film on Carbon Ionic Liquid Electrode

Multilayers of myoglobin (Mb) with ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM]BF₄) was assembled on carbon ionic liquid electrode (CILE) based on the electrostatic attraction between the negatively charged Mb and the positively charged imidazolium ion of IL. The CILE was fabricated with 1‐ethyl‐3‐methylimidazolium ethylsulfate ([EMIM]EtOSO₃) as the modifier, which exhibited imidazolium ion on the electrode surface. Then Mb molecules were assembled on the surface of CILE step‐by‐step to get a {IL/Mb}_n multilayer film modified electrode. UV‐Vis adsorption and FT‐IR spectra indicated that Mb remained its native structure in the IL matrix. In deaerated phosphate buffer solution (pH 7.0) a pair of well‐defined quasi‐reversible redox peaks appeared with the apparent formal potential (E^0′) as ‐0.212 V (vs. SCE), which was the characteristic of Mb heme Fe(III)/Fe(II) redox couples. The results indicated that the direct electron transfer of Mb was realized on the modified electrode. The {IL/Mb}_n/CILE displayed excellent electrocatalytic ability to the trichloroacetic acid reduction in the concentration range from 2.0 to 22.0 mmol/L with the detection limit of 0.6 mmol/L (3σ). The proposed method provides a new platform to fabricate the third generation biosensor based on the self‐assembly of redox protein with ILs.     

New Cytochalasins from the Marine‐Derived Fungus Xylaria sp. SCSIO 156

Two new cytochalasins, 18‐deoxycytochalasin Q ( 1 ) and 21‐O‐deacetylcytochalasin Q ( 2 ), together with four known analogues, cytochalasin Q ( 3 ), 19,20‐epoxycytochalasin Q ( 4 ), 21‐O‐deacetyl‐19,20‐epoxycytochalasin Q ( 5 ), and cytochalasin D ( 6 ), were isolated from the fungus Xylaria sp. SCSIO156 originated from the South China Sea marine sediment. The structures of 1 and 2 were elucidated by MS and 1D‐ and 2D‐NMR data analyses, and comparison with known compounds. The known compounds 3 – 6 were identified by comparison of their MS and NMR data with those reported in the literature. In the in vitro antitumor assay, compounds 2 – 6 showed mild cytotoxicity against three tumor cell lines (MCF‐7, SF‐268, and NCI‐H460).