一类两两NQD列乘积和的Jamison型强稳定性

研究了一类不同分布两两NQD列的Jamison型加权乘积和的强稳定性,推广了不同分布独立列部分和与同分布NQD列部分和情形相类似的结论.     

Operator‐splitting method for the analysis of cavitation in liquid‐lubricated herringbone grooved journal bearings

This paper presents an operator‐splitting method (OSM) for the solution of the universal Reynolds equation. Jakobsson–Floberg–Olsson (JFO) pressure conditions are used to study cavitation in liquid‐lubricated journal bearings. The shear flow component of the oil film is first solved by a modified upwind finite difference method. The solution of the pressure gradient flow component is computed by the Galerkin finite element method. Present OSM solutions for slider bearings are in good agreement with available analytical and experimental results. OSM is then applied to herringbone grooved journal bearings. The film pressure, cavitation areas, load capacity and attitude angle are obtained with JFO pressure conditions. The calculated load capacities are in agreement with available experimental data. However, a detailed comparison of the present results with those predicted using Reynolds pressure conditions shows some differences. The numerical results showed that the load capacity and the critical mass of the journal (linear stability indicator) are higher and the attitude angle is lower than those predicted by Reynolds pressure conditions for cases of high eccentricities. Copyright © 2004 John Wiley & Sons, Ltd.     

陈化温度和Fe/Zr配比对SO42-/Fe2O3-ZrO2固体超强酸结构与性能的影响

用低温陈化法制备了SO42 -/Fe2 O3 ZrO2 (简称SFZ)固体超强酸催化剂 ,用红外光谱 (IR)和X光衍射(XRD)对其结构进行了表征 ,并考察了它对合成癸二酸二正丁酯的催化性能 .IR谱显示 ,低温陈化的SFZ样品在10 70cm-1处吸收峰远强于常温陈化样品 .XRD分析则显示 ,在焙烧温度为 6 5 0℃、Fe/Zr为 2∶1时 ,低温陈化的样品出现了亚稳态的ZrO2 四方晶相 .该样品在催化酯化反应中使产率达 90 %以上 ,高于常温陈化样品的 30 % .研究结果表明 :在其他条件不变时 ,低温陈化所出现的亚稳态的ZrO2 四方晶相是表面酸性和催化活性增加的微观原因     

The fabrication and characterization of poly(lactic acid) scaffolds for tissue engineering by improved solid–liquid phase separation

In this article a new technique was developed to fabricate scaffolds with a unique microstructure by solid–liquid separation in combination with particulate-leaching. Firstly, the effects of polymer concentration, quenching temperature on the porous morphology and the mechanical property of obtained scaffolds during solid–liquid separation have been investigated. Then, salt granules as porogen were introduced into the solid–liquid phase separation to produce the unique pore structure of the scaffold. The pore diameter of the scaffold could be controlled with the particulate size and the wall of pores possessed special microstructure, which enhanced the pore interconnectivity. The cell culture results confirmed that a good interconnectivity of the scaffold prepared by the improved solid–liquid separation was useful for nutrition transportation and cell proliferation. Copyright © 2003 John Wiley & Sons, Ltd.     

Power scaling of printed-circuit-board preionized TEA CO2 laser up to 3.6 kW

A high average power, high-repetition-rate TEA CO₂ laser employing printed-circuit-board preionizer is described. The power scaling of this preionization configuration has been demonstrated. The average output power reaches 3.6 kW at pulse repetition rate of 180 pps. Furthermore, the scaling-up ability of the rotating spark gap as high-voltage switch for high-average-power gas laser has been validated.     

Structural, magnetic properties and photoemission study of Ni-doped ZnO

Nickel-doped ZnO (Zn_1−xNi_xO) have been produced using rf magnetron sputtering. X-ray diffraction measurements revealed that nickel atoms were successfully incorporated into ZnO host matrix without forming any detectable secondary phase. Ni 2p core-level photoemission spectroscopy confirmed this result and suggested Ni has a chemical valence of 2+. According to the magnetization measurements, no ferromagnetic but paramagnetic behavior was found for Zn_0.86Ni_0.14O. We studied the electronic structure of Zn_0.86Ni_0.14O by valence-band photoemission spectroscopy. The spectra demonstrate a structure at ∼2 eV below the Fermi energy E_F, which is of Ni 3d origin. No emission was found at E_F, suggesting the insulating nature of the film.     

Apparatus for High-Resolution Solid Hydrogen Matrix Isolation Spectroscopy and Its Application

Apparatus integrating a Fourier transform-infrared (FT-IR) spectrometer and a mid-infrared difference frequency generation (DFG) laser spectrometer was built for the study of the matrix isolation spectrum in solid molecular hydrogen. A 3-cm-long molecular hydrogen crystal was grown in a liquid-helium Dewar, and its infrared absorption spectrum in the 1-5 μm region was recorded to test the system. The W₀(0) (ν=0←0, J=6←0) line around 2410 cm⁻¹ of solid hydrogen was investigated with the DFG laser spectroscopy. High-resolution matrix isolation spectrum of CO² co-deposited with hydrogen on a BaF₂ cold plate at liquid-helium temperature was studied.     

线性代数网上学习系统的开发与研究

本文简要介绍线性代数学习网站的系统研究与开发设计．涉及到网络数据库、ASP、界面设计等多种技术.该线性代数网上学习系统为老师和学生提供了交流平台，其界面美观、操作简便．具有良好的应用前景.     

Local spatial transformations and local observables

Traditionally spatial transformations such as translations and rotations are formulated in terms of transformations of the entire spatial space. In other words, transformations are taken automatically to be of a global nature. This paper investigates a local approach to spatial transformations; local transformations lead naturally to local observables in quantum mechanics.