Investigation on nonradiative decay of I13/2→I15/2 transition of Er-doped oxide glasses

Nonradiative decay of ⁴I_13/2→⁴I_15/2 transition of Er³⁺ has been investigated in a series of oxide glasses. For Er³⁺-doped glass samples, the Judd-Ofelt analysis on absorption spectra was performed and the fluorescence lifetime was determined by extrapolating to zero Er³⁺ concentration limit. Infrared spectra were measured in order to investigate the influence of OH⁻ groups in different glasses. The effects of glass matrix on the decay rate were discussed from the viewpoint of phonon energy, variations of effective fields, and OH⁻ groups. Compared to other glasses, phosphate glass presents low quantum efficiency and large nonradiative decay rate due to its high phonon energy and hygroscopic behavior.     

Comparative investigation of up-conversion luminescence in Tm/Yb-codoped germanate-niobic and germanium-bismuth glasses: effect of phonon density on up-conversion emission

Tm³⁺/Yb³⁺-codoped germanate-niobic (GN) and germanium-bismuth (GB) glasses have been synthesized by conventional melting and quenching method. Intense blue and weak red emissions centered at 477 and 650 nm, corresponding to the transitions ¹G₄→³H₆ and ¹G₄→³H₄, respectively, were observed at room temperature. The possible up-conversion mechanisms are discussed and estimated. GN glass showed a weaker up-conversion emission than GB glass, which is inconsistent with the prediction from the difference of maximum phonon energy between GN and GB glasses. In this paper, Raman spectroscopy was employed to investigate the origin of the difference in up-conversion luminescence in the two glasses. Compared with phonon side-band spectroscopy, Raman spectroscopy extracts more information including both phonon energy and phonon density. For the first time, our results reveal that, besides the maximum phonon energy, the phonon density of host glasses is also an important factor in determining the up-conversion efficiency.     

新型AFM探针的制备及应用

采用熔拉 -腐蚀复合方法 ,将普通单模石英光纤制成直锥形光纤探针。利用自制工具将探针打弯 ,制成悬臂式光纤探针 ,在AFM上取得了较理想的测试结果。将自制光纤探针和商用硅材料探针获得的两种扫描图像进行了对比 ,分析了悬臂式光纤探针的特点     

应变Si1-xGex层中p型杂质电离常温和低温特性

本文采用解析的方法计算了应变Si1-xGex层中p型杂质电离度与Ge组分x、温度T以及掺杂浓度N的关系.发现常温时,在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度的先变小,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加先变大,而后几乎不变;重掺杂时,杂质电离能变为0后,杂质电离度为1.低温下,轻掺杂时,载流子低温冻析效应较为明显,杂质的电离度普遍较小,当掺杂浓度大于Mott转换点时,载流子冻析效应不再明显,电离率迅速上升到1.在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度先变小,后变大,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加变大;重掺杂时,杂质电离能变为0后,杂质电离度为1.     

热等离子体裂解天然气制备C2烃

采用氮气热等离子体来裂解天然气制备乙炔乙烯,着重研究了天然气转化率和乙炔、乙烯收率随氮气流量和天然气流量的变化.结果表明,天然气流量与氮气流量之比为11时,可得到较好的结果.当等离子体功率为15kW、天然气流量为3Nm3*h-1、氮气流量为3Nm3*h-1时得到最好的结果.这时天然气转化率为57%,乙炔、乙烯的收率分别为34%和9%;乙炔在反应气中的体积浓度为7.5%,与部分氧化法相似;扣除不参加反应的氮气,乙炔在气相产品中的体积浓度为13.2%,与热力学平衡计算结果基本符合.     

EchSGB远距离照明条件下的焦开关

推导了复变量双曲余弦平方-高斯光束(EchSGB)被无光阑透镜聚焦后的轴上光强分布公式,在此基础上通过数值计算和分析发现,EchSGB只有在远距离照明条件下才存在焦开关现象.焦点跃变位置随光束参数和对应高斯光束的菲涅尔数不同而变化,得到了EchSGB在平顶情形下产生焦开关的相对入射距离为11.13,表明在远距离照明和无光阑透镜精密调焦时,对于EchSGB要考虑焦开关现象的影响.     

表面细分技术在二维声辐射和声散射中的应用

把表面细分技术应用于求解边界积分方程，既能把CAD模型直接用于边界元分析，又能精确描述复杂的边界几何形状，实现网格自动加密和形函数自动升阶，满足误差要求。把它应用于简单的二维声辐射和声散射，结果表明对提高边界元方法的计算精度是有效的。     

SILEX-1装置上等离子体尾场加速电子初步实验

激光等离子体加速电子机制可以产生准单能的高能电子束, 近年来成为国际上的研究热点. 中国工程物理研究院激光装置已经能够达到286TW的输出功率, 为国内在该领域的研究提供了实验条件. 文章介绍了在SILEX-1装置上开展的激光等离子体加速电子的初步实验, 并对测得结果进行讨论, 为下一步实验的进行提供了准备条件.     

CH HCSB TBM�й�����մ���ֳ��΢���о���չ

介绍了中国氦冷球床实验包层模块(CHHCSBTBM)设计中固体氚增殖剂陶瓷球的功能要求。考虑正硅酸锂(Li4SiO4)作为第一候选材料。对其陶瓷粉体的制作方法、微球成型方法和微球中氚的释放、辐射稳定性等进行了简要介绍,并概述了我国在固体氚增殖剂研究方面已经开展的工作。     

Fe对掺钕磷酸盐激光玻璃激光性能的影响

 在理论分析的基础上，具体讨论了Fe质量分数小于10^-4对1 053 nm处光吸收损耗和Nd³⁺无辐射跃迁几率的影响规律，发现Fe在1 053 nm处的光吸收损耗和Nd³⁺无辐射跃迁能量转移都与Fe质量分数成平方关系增长， Fe对1 053 nm光吸收的影响较大而Fe与Nd³⁺之间的能量转移不足50 Hz。这对生产过程中Fe含量的控制有重要指导意义。